Overclock.net › Forums › AMD › AMD CPUs › AMD Athlon X2 7750 BE OC Club
New Posts  All Forums:Forum Nav:

AMD Athlon X2 7750 BE OC Club - Page 21

post #201 of 1165
Quote:
Originally Posted by hellr4isEr View Post
how exactly are you trying to overclock? are you just upping the multiplier or changing the reference clock as well? you should be able to get a stable 3.0ghz at stock voltages by just upping the multiplier.. btw what overclock speed did u manage to get stable at? i especially hate ASUS boards for anything AMD related.. so for me.. my number one problem is your board lol.. sorry but thats jus me rambling.. there really should be nothing holding u back since u seem to have a good setup as per your sig rig..
I can get completely stable at 3.045 with a 15x multiplier and 203 clock, verified with prime95 at 10 hours and multiple graphics apps after that. I haven't run Prime for very long at 3.075 15x at 205 clock, but I have not crashed at those settings. I am using the BIOS and I have tried to get 3.1 both by going to 207 clock at 15x and 200 x 15.5. Neither one has been stable for more than a couple of hours, and usually crash within the first half hour. I can get 3.0 stable at stock voltage no problem. To get the 3.075 stable (again, unverified stability) I have to go up to 1.38 volts.
Snow Leopard
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-5820k  MSI X99S SLI Krait Edition EVGA Geforce GTX 980 Superclocked EVGA Geforce GTX 980 Superclocked 
RAMHard DriveCoolingOS
Corsiar Vengeance LPX DDR4  Crucial MX200 m.2 Corsair H110 with Noctua NF-A14 Windows 10 
MonitorKeyboardPowerCase
Asus PG278Q ROG Swift Razer Black Widow Chroma EVGA SuperNova 750 G2 Phanteks Enthoo Luxe  
MouseMouse PadAudioAudio
Razer Naga Epic Chroma Razer Goliathus Speed Audio Engine N22 Amplifier Polk Monitor 35b Speakers 
Audio
Polk PSW111 Subwoofer 
  hide details  
Reply
Snow Leopard
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-5820k  MSI X99S SLI Krait Edition EVGA Geforce GTX 980 Superclocked EVGA Geforce GTX 980 Superclocked 
RAMHard DriveCoolingOS
Corsiar Vengeance LPX DDR4  Crucial MX200 m.2 Corsair H110 with Noctua NF-A14 Windows 10 
MonitorKeyboardPowerCase
Asus PG278Q ROG Swift Razer Black Widow Chroma EVGA SuperNova 750 G2 Phanteks Enthoo Luxe  
MouseMouse PadAudioAudio
Razer Naga Epic Chroma Razer Goliathus Speed Audio Engine N22 Amplifier Polk Monitor 35b Speakers 
Audio
Polk PSW111 Subwoofer 
  hide details  
Reply
post #202 of 1165
Quote:
Originally Posted by Templar848 View Post
I can get completely stable at 3.045 with a 15x multiplier and 203 clock, verified with prime95 at 10 hours and multiple graphics apps after that. I haven't run Prime for very long at 3.075 15x at 205 clock, but I have not crashed at those settings. I am using the BIOS and I have tried to get 3.1 both by going to 207 clock at 15x and 200 x 15.5. Neither one has been stable for more than a couple of hours, and usually crash within the first half hour. I can get 3.0 stable at stock voltage no problem. To get the 3.075 stable (again, unverified stability) I have to go up to 1.38 volts.
does your board have an ACC setting? try setting that to auto.. also try lowering the dram speed and see what happens..
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
post #203 of 1165
It does have ACC settings, and I have not tried that. I will also try lowering the ram settings and see what happens.

I had someone I know mention to me that Vista 64 was not a good solution for an overclocked system. Is that a possible issue as well?

Oh, and thank you for the help.
Snow Leopard
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-5820k  MSI X99S SLI Krait Edition EVGA Geforce GTX 980 Superclocked EVGA Geforce GTX 980 Superclocked 
RAMHard DriveCoolingOS
Corsiar Vengeance LPX DDR4  Crucial MX200 m.2 Corsair H110 with Noctua NF-A14 Windows 10 
MonitorKeyboardPowerCase
Asus PG278Q ROG Swift Razer Black Widow Chroma EVGA SuperNova 750 G2 Phanteks Enthoo Luxe  
MouseMouse PadAudioAudio
Razer Naga Epic Chroma Razer Goliathus Speed Audio Engine N22 Amplifier Polk Monitor 35b Speakers 
Audio
Polk PSW111 Subwoofer 
  hide details  
Reply
Snow Leopard
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-5820k  MSI X99S SLI Krait Edition EVGA Geforce GTX 980 Superclocked EVGA Geforce GTX 980 Superclocked 
RAMHard DriveCoolingOS
Corsiar Vengeance LPX DDR4  Crucial MX200 m.2 Corsair H110 with Noctua NF-A14 Windows 10 
MonitorKeyboardPowerCase
Asus PG278Q ROG Swift Razer Black Widow Chroma EVGA SuperNova 750 G2 Phanteks Enthoo Luxe  
MouseMouse PadAudioAudio
Razer Naga Epic Chroma Razer Goliathus Speed Audio Engine N22 Amplifier Polk Monitor 35b Speakers 
Audio
Polk PSW111 Subwoofer 
  hide details  
Reply
post #204 of 1165
Blew my mb out.....

I hope that the 7750 isn't f'd up!!!

As soon as I tried 3.8 with x19 multi windows booted then crashed at the sign in screen, then the mb never reposted again since.

I've resetted the cmos 12 times and even let it sit unplugged for a while, watching for the mb leds to come on and not one light blinked on.

O'well dry ice was fun while that lasted.
It did chilled my heater core down to -30c tho But.

New Egg time!!! Hopefully my kuma isn't screwed, if so Phenom II combo here I come!!
In+el $h!+in...
(13 items)
 
  
CPUMotherboardGraphicsRAM
7750 3.7ghz..PH2 940 4.66ghz Gigabyte GA-MA790x-UD4 Back on 9600gt :( G.Skill PI 4GB 8800/1100mhz 
Hard DriveOSMonitorPower
x2 Sata 250gb Xp/Xp-64/w7/w7-64 32'' Lcd HD 1080P Corsair Tx750 
  hide details  
Reply
In+el $h!+in...
(13 items)
 
  
CPUMotherboardGraphicsRAM
7750 3.7ghz..PH2 940 4.66ghz Gigabyte GA-MA790x-UD4 Back on 9600gt :( G.Skill PI 4GB 8800/1100mhz 
Hard DriveOSMonitorPower
x2 Sata 250gb Xp/Xp-64/w7/w7-64 32'' Lcd HD 1080P Corsair Tx750 
  hide details  
Reply
post #205 of 1165
Quote:
Originally Posted by Templar848 View Post
It does have ACC settings, and I have not tried that. I will also try lowering the ram settings and see what happens.

I had someone I know mention to me that Vista 64 was not a good solution for an overclocked system. Is that a possible issue as well?

Oh, and thank you for the help.
no prob.. glad to help.. i dont think vista 64 would be a problem with overclocking.. im 99% sure on that..however if u are skeptical on that, you could always try installing xp.. if u have it that is.. i highly doubt thats the problem tho.. have you checked reviews on ur board? mayb its not that good for overclock?
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
post #206 of 1165
Hey guys, I went into my BIOS to overclock my 7750, I set the Multiplyer to 15 and change my ram clock to 1066 since it was 800 stock. Thats all i did and when I run Orthos I get this message
Quote:
Using CPU #1
Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 36 seconds - 1 errors, 0 warnings.
Execution halted.
I tried to find the Stress.txt but could not find it? What did I do wrong?
New Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 7750 BE @ 3.0 GHz GIGABYTE GA-MA78G-DS3HP XFX 9800 GTX OCZ Raiper 4gb's 
Hard DriveOSPowerCase
2x Western Digital 160 gb Windows XP 32-bit OCZ GameXstream 700w Antec 900 
Mouse
Logitec MX518 
  hide details  
Reply
New Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 7750 BE @ 3.0 GHz GIGABYTE GA-MA78G-DS3HP XFX 9800 GTX OCZ Raiper 4gb's 
Hard DriveOSPowerCase
2x Western Digital 160 gb Windows XP 32-bit OCZ GameXstream 700w Antec 900 
Mouse
Logitec MX518 
  hide details  
Reply
post #207 of 1165
Quote:
Originally Posted by dakid898 View Post
Hey guys, I went into my BIOS to overclock my 7750, I set the Multiplyer to 15 and change my ram clock to 1066 since it was 800 stock. Thats all i did and when I run Orthos I get this message

I tried to find the Stress.txt but could not find it? What did I do wrong?
just means its unstable.. i suggest u clock the ram back down to 800 for now.. and try again..
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
post #208 of 1165
Quote:
Originally Posted by STL_OverClocker View Post
Blew my mb out.....

I hope that the 7750 isn't f'd up!!!

As soon as I tried 3.8 with x19 multi windows booted then crashed at the sign in screen, then the mb never reposted again since.

I've resetted the cmos 12 times and even let it sit unplugged for a while, watching for the mb leds to come on and not one light blinked on.

O'well dry ice was fun while that lasted.
It did chilled my heater core down to -30c tho But.

New Egg time!!! Hopefully my kuma isn't screwed, if so Phenom II combo here I come!!
sorry to hear that man.. hope all is well wit the KUMA
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
PewPew
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6850k ASRock X99 Taichi EVGA GTX 1070 FTW GeiL 4x8GB DDR4 3000 RGB 
Hard DriveCoolingOSMonitor
Intel 600p 512GB NZXT X61 Windows 10 Pro Asus PB278Q 
KeyboardPowerCaseMouse
CM Masterkeys L RGB Brown EVGA GS 1050W Corsair 400c Logitech G502 RGB 
  hide details  
Reply
post #209 of 1165
Quote:
Originally Posted by STL_OverClocker View Post
Blew my mb out.....

I hope that the 7750 isn't f'd up!!!

As soon as I tried 3.8 with x19 multi windows booted then crashed at the sign in screen, then the mb never reposted again since.

I've resetted the cmos 12 times and even let it sit unplugged for a while, watching for the mb leds to come on and not one light blinked on.

O'well dry ice was fun while that lasted.
It did chilled my heater core down to -30c tho But.

New Egg time!!! Hopefully my kuma isn't screwed, if so Phenom II combo here I come!!
How bad was the condensation?
when you chill water with dry ice I bet the CPU temps dropped pretty far below ambient, and I'll bet all the water lines and such were coated in condensation, right?
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
Taiga's 2nd wind
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 6600K Gigabyte GA-Z170XP-SLI Gigabyte GTX 970 G1 Gaming G.Skill Ripjaws V series 
Hard DriveHard DriveCoolingOS
Western Digital 1TB HDD Mushkin Enhanced Eco2 SSD Silverstone TD02-Lite Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
Acer G257HU Roccat Isku Corsair CX600M Antec P182 
MouseMouse Pad
Roccat Kone+ SteelSeries 
  hide details  
Reply
post #210 of 1165
Quote:
Originally Posted by hellr4isEr View Post
just means its unstable.. i suggest u clock the ram back down to 800 for now.. and try again..
same thing


EDIT: I even put my voltage to 1.408 and same thing...
Edited by dakid898 - 2/7/09 at 9:09am
New Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 7750 BE @ 3.0 GHz GIGABYTE GA-MA78G-DS3HP XFX 9800 GTX OCZ Raiper 4gb's 
Hard DriveOSPowerCase
2x Western Digital 160 gb Windows XP 32-bit OCZ GameXstream 700w Antec 900 
Mouse
Logitec MX518 
  hide details  
Reply
New Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 7750 BE @ 3.0 GHz GIGABYTE GA-MA78G-DS3HP XFX 9800 GTX OCZ Raiper 4gb's 
Hard DriveOSPowerCase
2x Western Digital 160 gb Windows XP 32-bit OCZ GameXstream 700w Antec 900 
Mouse
Logitec MX518 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › AMD Athlon X2 7750 BE OC Club