Hi, new here. Wanted to get some advice/help.
Only just started trying to push my 720 due to my accusition of my s1283 to cool the thing down. Currently stuck at 3.5ghz (validation
, 2 hour Prime stable), and due to my limited knowledge cannot get it to 3.6.
I only know very basic methods (multi and HT ref clock/FSB, upping Vcore), so wanted to get some other directions to go.
My latest attempt was something like 1.485v just using 18x200, which BSed after about 5 minutes Prime stressing. I have been reading the thread, but not knowing what most terms really mean makes it difficult. I wasn't worried about temps when pushing the voltage up that high as it idled around 19-20, and seemed to peek around 34-35, so no worries there.
Can anyone spare some advice on helping me get the most out of this chip.