Overclock.net › Forums › Intel › Intel Motherboards › Foxconn Bloodrage Overclocking/Help Thread
New Posts  All Forums:Forum Nav:

Foxconn Bloodrage Overclocking/Help Thread - Page 4

post #31 of 711
I finally received my board today and it took me a couple of hours to install everything. Ive notice that this board is not at all buggy like the 1st one i had, i hope newegg does not sell the rma i sent as an open box to someone. Will try to overclock tomorrow and configure the bios.
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
post #32 of 711
I'm in the research mode atm since I will probably be getting a new board when the 920 D0's become available. This board has my attention! Some of the bios malfunction issues are concerning. Is this an isolated issue or are most people having issues with the live update?
Seabiscuit
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 @ 4.2Ghz (201 x 21 HT on) 1.258v EVGA Classified 760 w/ Koolance NB Block EVGA GTX275 3x2 OCZ 
Hard DriveOptical DriveOSMonitor
300GB Raptor light-on DVDR Vista 64 Ultimate NEC PA241W 
KeyboardPowerCaseMouse
G15 Ultra X3 1000W Dremel Modded CM Cosmos S G9 
  hide details  
Reply
Seabiscuit
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 @ 4.2Ghz (201 x 21 HT on) 1.258v EVGA Classified 760 w/ Koolance NB Block EVGA GTX275 3x2 OCZ 
Hard DriveOptical DriveOSMonitor
300GB Raptor light-on DVDR Vista 64 Ultimate NEC PA241W 
KeyboardPowerCaseMouse
G15 Ultra X3 1000W Dremel Modded CM Cosmos S G9 
  hide details  
Reply
post #33 of 711
I think its an isolated issue, when i compared the one i have now with the one i rma, from 1st boot the one i have now is lot more stable. This is pretty much my 1st build and have no knowledge of overclocking. This board is really for the moderate to high knowledge to be able to overclock this, many overclocking features. Right now im only able to get 3.0 by just raising the blck to 150, my temperature is around high 40's at load. Not sure how to clock this any further, im hoping some1 here can help me with the bios settings.
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
post #34 of 711
Quote:
Originally Posted by Gollie View Post
I'm in the research mode atm since I will probably be getting a new board when the 920 D0's become available. This board has my attention! Some of the bios malfunction issues are concerning. Is this an isolated issue or are most people having issues with the live update?
Had my first issue using "Fox Update" in Windows last night to update to the 07 BIOS. Figured out it didn't like something with CDBurner. Uninstalling CDBurner fixed the problem. Smooth sailing again.

First tests: No noticeable benefit from new BIOS..........
Edited by Patch - 4/8/09 at 1:04pm
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
post #35 of 711
Patch can you post you bios setting, so i can overclock even much further. TY
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
post #36 of 711
Quote:
Originally Posted by ritchwell View Post
Patch can you post you bios setting, so i can overclock even much further. TY
Check out the 4.3 ghz 24/7 link in my sig for my everyday settings. Being on a good water cooled setup (and less concerned about chip longevity), I'm much more aggressive with voltages than most people. And I like to keep hyperthreading on. It can limit your clocks by dramatically increasing temps, but it doesn't seem to affect overclocking ability much on my rig. Only at 4.6 Ghz +.

Keep in mind that every set up is different. My RAM doesn't like running higher than ~1720 mhz, so when running the CPU at 4.5 ghz and above I have to underclock the RAM to 1200-1300's. Of course, that bugs me so I tighten up the timings a lot to make myself feel better.......
Edited by Patch - 4/8/09 at 1:18pm
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
post #37 of 711
Quote:
Originally Posted by Patch View Post
Check out the 4.3 ghz 24/7 link in my sig for my everyday settings. Being on a good water cooled setup (and less concerned about chip longevity), I'm much more aggressive with voltages than most people. And I like to keep hyperthreading on. It can limit your clocks by dramatically increasing temps, but it doesn't seem to affect overclocking ability much on my rig. Only at 4.6 Ghz +.

Keep in mind that every set up is different. My RAM doesn't like running higher than ~1720 mhz, so when running the CPU at 4.5 ghz and above I have to underclock the RAM to 1200-1300's. Of course, that bugs me so I tighten up the timings a lot to make myself feel better.......
I knotice in you link that xmp is enabled, i have the corsair xmp should i set it manual or give it a profile since i have 2 profiles on the ram.
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
post #38 of 711
Did I miss something? Did Foxconn say they were no longer going to be making MB's?
Seabiscuit
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 @ 4.2Ghz (201 x 21 HT on) 1.258v EVGA Classified 760 w/ Koolance NB Block EVGA GTX275 3x2 OCZ 
Hard DriveOptical DriveOSMonitor
300GB Raptor light-on DVDR Vista 64 Ultimate NEC PA241W 
KeyboardPowerCaseMouse
G15 Ultra X3 1000W Dremel Modded CM Cosmos S G9 
  hide details  
Reply
Seabiscuit
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 @ 4.2Ghz (201 x 21 HT on) 1.258v EVGA Classified 760 w/ Koolance NB Block EVGA GTX275 3x2 OCZ 
Hard DriveOptical DriveOSMonitor
300GB Raptor light-on DVDR Vista 64 Ultimate NEC PA241W 
KeyboardPowerCaseMouse
G15 Ultra X3 1000W Dremel Modded CM Cosmos S G9 
  hide details  
Reply
post #39 of 711
I was finally was able to finally able to resolve my memory issue. In order to overclock in this board with my ram i had to disable the xmp and manually input the right timing. I got it to 3.8 and was testing for stability, since im new to overclocking im not sure what is causing window to reset after 15 of prime 95. Do i have to increase any voltage for more stability?
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
Master Shifu
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel core i7 3770k (4.5) Gigabyte Z77x-UP5TH EVGA GTX 670 2G SLI 16 Gig Samsung  
Hard DriveHard DriveOptical DriveCooling
Intel 330 raid 0 ( Windows 8) WD Caviar Black LG DVD R/RW Corsair 100H Push and Pull 
OSMonitorKeyboardPower
Windows 8 pro Auria 27'WQHD 2560x1440 Logitech K750 Thermaltake 850 
CaseMouseAudio
Corsair 700D w/window side panel Logitech G700 gaming mouse Klipsh Promedia 2.1 
  hide details  
Reply
post #40 of 711
Quote:
Originally Posted by ritchwell View Post
I was finally was able to finally able to resolve my memory issue. In order to overclock in this board with my ram i had to disable the xmp and manually input the right timing. I got it to 3.8 and was testing for stability, since im new to overclocking im not sure what is causing window to reset after 15 of prime 95. Do i have to increase any voltage for more stability?
Increase the voltage by small increments to find the sweet spot. If that does not work, you might have to do some other tweaking.

I CAN'T WAIT TILL I GET MY SET UP!

Also, what are your temps like with that TRUE?
Seabiscuit
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 @ 4.2Ghz (201 x 21 HT on) 1.258v EVGA Classified 760 w/ Koolance NB Block EVGA GTX275 3x2 OCZ 
Hard DriveOptical DriveOSMonitor
300GB Raptor light-on DVDR Vista 64 Ultimate NEC PA241W 
KeyboardPowerCaseMouse
G15 Ultra X3 1000W Dremel Modded CM Cosmos S G9 
  hide details  
Reply
Seabiscuit
(13 items)
 
  
CPUMotherboardGraphicsRAM
W3520 @ 4.2Ghz (201 x 21 HT on) 1.258v EVGA Classified 760 w/ Koolance NB Block EVGA GTX275 3x2 OCZ 
Hard DriveOptical DriveOSMonitor
300GB Raptor light-on DVDR Vista 64 Ultimate NEC PA241W 
KeyboardPowerCaseMouse
G15 Ultra X3 1000W Dremel Modded CM Cosmos S G9 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Foxconn Bloodrage Overclocking/Help Thread