Overclock.net › Forums › Intel › Intel Motherboards › Foxconn Bloodrage Overclocking/Help Thread
New Posts  All Forums:Forum Nav:

Foxconn Bloodrage Overclocking/Help Thread - Page 52

post #511 of 711
Quote:
Originally Posted by All_Ways_Custom View Post
How does this sound i7 920 D0/ 4.1ghz @ 1.36v. Load temps 65/64/64/62. Does that sound normal I wanna lower my Vcore but when I do. I run prime for about 30 secs then blue screen. I'm still pretty new to OCing but I'm researching as much as possible. Any tips would be great. Thanks
That's a little high, what is your VTT at?
    
CPUMotherboardGraphicsRAM
Intel Core-I5 7600K ASUS ROG Maximus VIII Formula ASUS GTX 1080 Strix OC Corsair Dominator Platinum DDR4 16GB 3000Mhz C15 
Hard DriveHard DriveHard DriveCooling
Samsung 850 Evo SSD 250GB (OS) WD Cavier Black 1TB (Data) WD Velociraptor 150GB (Flight Sim) EK-Supremacy EVO CPU Water Block - Nickel 
CoolingOSMonitorKeyboard
EK-FC1080 GTX Strix - Nickel Windows 10 64-Bit LG 34UM68-P 34" 21:9 UltraWide Full HD IPS LED WASD Custom Mechanical w/ Cherry MX Blues 
PowerCaseMouseMouse Pad
CoolerMaster V1200 Platinum Thermaltake View 27 Logitech G602 Logitech G440 
AudioOtherOtherOther
Bose Companion 3 Series II Saitek Pro Flight Yoke / Throttle Quadrant  Saitek Pro Flight Rudder Pedals Saitek X52 Flight System 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core-I5 7600K ASUS ROG Maximus VIII Formula ASUS GTX 1080 Strix OC Corsair Dominator Platinum DDR4 16GB 3000Mhz C15 
Hard DriveHard DriveHard DriveCooling
Samsung 850 Evo SSD 250GB (OS) WD Cavier Black 1TB (Data) WD Velociraptor 150GB (Flight Sim) EK-Supremacy EVO CPU Water Block - Nickel 
CoolingOSMonitorKeyboard
EK-FC1080 GTX Strix - Nickel Windows 10 64-Bit LG 34UM68-P 34" 21:9 UltraWide Full HD IPS LED WASD Custom Mechanical w/ Cherry MX Blues 
PowerCaseMouseMouse Pad
CoolerMaster V1200 Platinum Thermaltake View 27 Logitech G602 Logitech G440 
AudioOtherOtherOther
Bose Companion 3 Series II Saitek Pro Flight Yoke / Throttle Quadrant  Saitek Pro Flight Rudder Pedals Saitek X52 Flight System 
  hide details  
Reply
post #512 of 711
Quote:
Originally Posted by Touge180SX View Post
That's a little high, what is your VTT at?
I played around with it for a little while now I'm at 4Ghz@1.28v
Load Temps 56/55/56/54
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
post #513 of 711
much better.
Bloodraged M&M
(13 items)
 
  
CPUMotherboardGraphicsRAM
| i7 920 D0 @ 4.2Ghz HT ON | | Foxconn Bloodrage | | 2 x Gtx 260 (65nm 192) SLI | | 6Gb (2x3) Corsair Dominator 1600 | 
Hard DriveOptical DriveOSMonitor
| 2x300Gb WD Velociraptors in Raid0|WD 1tb Green | | DVD Multi Recorder | | Vista Ultimate 64-bit | | 24" Acer P243w | Samsung T240HD 24" | 
KeyboardPowerCaseMouse
| Razer Lycosa | | X3 Ultra 800 Watt Modular Power Supply| | Standard U2-UFO Mountain Mods Case | | Steelseries Ikari Laser Mouse | 
Mouse Pad
| Steelseries | 
  hide details  
Reply
Bloodraged M&M
(13 items)
 
  
CPUMotherboardGraphicsRAM
| i7 920 D0 @ 4.2Ghz HT ON | | Foxconn Bloodrage | | 2 x Gtx 260 (65nm 192) SLI | | 6Gb (2x3) Corsair Dominator 1600 | 
Hard DriveOptical DriveOSMonitor
| 2x300Gb WD Velociraptors in Raid0|WD 1tb Green | | DVD Multi Recorder | | Vista Ultimate 64-bit | | 24" Acer P243w | Samsung T240HD 24" | 
KeyboardPowerCaseMouse
| Razer Lycosa | | X3 Ultra 800 Watt Modular Power Supply| | Standard U2-UFO Mountain Mods Case | | Steelseries Ikari Laser Mouse | 
Mouse Pad
| Steelseries | 
  hide details  
Reply
post #514 of 711
I can't go any lower on my Vcore than +40 and +120 on VTT or it gets unstable @ 4ghz. What is the defualt VTT voltage? My temps are really low using my megatron I've gotten 4.4ghz to post but won't load windows I think I need more voltage I just don't know where lol. Any setting you guys would recommend. And also how do I put my CPU-z, temps results into a post.
Edited by All_Ways_Custom - 8/28/09 at 12:12pm
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
post #515 of 711
I'm at 4.06Ghz, but I keep getting a bsod (124) after about 1.5hrs of prime95. I tried both small and large fft. I've been changing voltages, but nothing seems to work. According to the guide it is the uncore/qpi. Which setting is that in the bios? I only see vtt and pll, but isn't that different?

bclock: 193x21
vcore: ~1.27
vtt: 1.24 (I had it at 1.34, but I still got the bsod, after turning it down, still the same thing)
pll: 1.8 (i also turned this up a little, but it didn't seem to do anything)
vdimm: 1.66
ioh: 1.2

its running 73-75C under full load, ambient temps are low 80's.

thanks for the help.
Reborn Legacy
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4.1 Ghz Foxconn Bloodrage 2 x OEM 5870 OCZ Platinum 6GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 2 x Caviar Black (RAID 0) Samsung SH-S223L Prolimatech Megahalems 
CoolingCoolingOSMonitor
Delta AFC1212DE 5 x Coolermaster R4 (red LED) Windows 7 Pro Dell U2412M 
MonitorMonitorKeyboardPower
Asus VW223T Mitsubishi Diamond Pro 710s Leopold FC200RT/KB (tactile touch with blank keys) Corsair TX850W 
CaseMouseMouse PadAudio
Reborn Legacy (mod) Razer Deathadder Rocketfish Beyerdynamic DT 990 Pro 
AudioAudioAudio
M-Audio MobilePre M-Audio BX5a Audio Technica ATH-M50 
  hide details  
Reply
Reborn Legacy
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4.1 Ghz Foxconn Bloodrage 2 x OEM 5870 OCZ Platinum 6GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 2 x Caviar Black (RAID 0) Samsung SH-S223L Prolimatech Megahalems 
CoolingCoolingOSMonitor
Delta AFC1212DE 5 x Coolermaster R4 (red LED) Windows 7 Pro Dell U2412M 
MonitorMonitorKeyboardPower
Asus VW223T Mitsubishi Diamond Pro 710s Leopold FC200RT/KB (tactile touch with blank keys) Corsair TX850W 
CaseMouseMouse PadAudio
Reborn Legacy (mod) Razer Deathadder Rocketfish Beyerdynamic DT 990 Pro 
AudioAudioAudio
M-Audio MobilePre M-Audio BX5a Audio Technica ATH-M50 
  hide details  
Reply
post #516 of 711
FYI, for anyone using the settings I posted over on xtreme, those were indeed for a C0 stepping. For D0 I found I could leave everything on auto except for vcore (1.27v), vtt (1.22v) and dimm (1.65v). This was for 200BCLK with a x21 multi and the CPU settings I have listed in the original bios configuration I listed. This would give me 4.2Ghz and 1600Mhz on my ram. I was also on water cooling and P06 bios. Never had a chance to play with the G25 and P08 was unstable for me. If you have a D0 you should be able to hit this fairly easy even on air, although it will depend on your temps, but unless you are crunching you should be fine. You can always leave EIST on and let it throttle when you are not gaming or what not.

I have been contemplating going back to the BR from the Classified since it was so damn sexy and easy to setup. the only drawback was that TRI-SLI/CF wasn't supported, but after playing with it for awhile I may drop one of the cards for SLI or just go with a GTX295. Haven't decided yet. I like both boards, but think the BR edges the Classified out with ease of use and stability, but that's just my opinion.

Anyway, good luck with your overclocks, just thought I would chime in since some were using my settings.
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
post #517 of 711
I spent all day getting 4ghz stable. Well I woke up this morning turned my computer on and I can't get anything over stock speeds to boot. What is going on with this thing. I'm starting to get a little frustrated becuz yesterday everthing was fine. I even played a little Crysis and Prototype on it. Can anybody help? And I've already tried the usual thing resetting the cmos, unplugging and etc...
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
post #518 of 711
Quote:
Originally Posted by All_Ways_Custom View Post
I spent all day getting 4ghz stable. Well I woke up this morning turned my computer on and I can't get anything over stock speeds to boot. What is going on with this thing. I'm starting to get a little frustrated becuz yesterday everthing was fine. I even played a little Crysis and Prototype on it. Can anybody help? And I've already tried the usual thing resetting the cmos, unplugging and etc...
I'm quoting myself lol. I fixed the problem it was a HDD error causing all the problems. All is well I have to reinstall Win 7 x64
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
Blue Silver
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 (4.2Ghz @1.29v 24/7) 4.4 reached Gigabyte GA-EX58-UD5 Gigabyte 1GB GTX 460(enroute) OCZ Gold 3x 2GB 1600 8-8-8-24 
Hard DriveOptical DriveOSMonitor
Seagate 750GB & WD Green 250GB Samsung SH-223F DVD Burner Windows 7 x64 bit HP 2159m 21.5in 1920x1080 
PowerCase
Corsair 850TX ATCS 840 
  hide details  
Reply
post #519 of 711
Question: Could I run 2 SATA drives RAID 0 through the SATA RAID controller and 2 SATA drives RAID 1 (mirror) through the SAS controller simultaneously with the bloodrage?
Never finished
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz Foxconn Bloodrage 2xEVGA GTX480 [SLI] ["The Mod"] [3x2GB] G-Skill Perfect Storm (PC3 16000) 
Hard DriveCoolingOSMonitor
2x X25-M G2 80GB/300GB VR/2x1TB 7200.12 (RAID1) CORSAIR H100 Windows 7 HP 64-bit Dell U3011 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000 Rosewill Blackhawk-Ultra Logitech G500 
  hide details  
Reply
Never finished
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.0GHz Foxconn Bloodrage 2xEVGA GTX480 [SLI] ["The Mod"] [3x2GB] G-Skill Perfect Storm (PC3 16000) 
Hard DriveCoolingOSMonitor
2x X25-M G2 80GB/300GB VR/2x1TB 7200.12 (RAID1) CORSAIR H100 Windows 7 HP 64-bit Dell U3011 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000 Rosewill Blackhawk-Ultra Logitech G500 
  hide details  
Reply
post #520 of 711
Yes. You can run two drives (A and B) in RAID 0 on the onboard controller and then two different drives (C and D) on the SAS controller as RAID 1. Or you could run them all off of the x58 ICH10R onboard controller the same way.
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Foxconn Bloodrage Overclocking/Help Thread