Overclock.net › Forums › Intel › Intel Motherboards › Foxconn Bloodrage Overclocking/Help Thread
New Posts  All Forums:Forum Nav:

Foxconn Bloodrage Overclocking/Help Thread - Page 68

post #671 of 711
Quote:
Originally Posted by OC Me View Post
That's interesting. Speedfan used to show my GPU temp in the tray. After a while, it just started showing 00. However, I'm not sure if this was due to me upgrading to P09 because I updated my ForceWare drivers around the same time.
Drivers most likely. My EVGA Precision and Real Temp went CRAZY with drivers before 191.07 and showed around ~34,000 ºC plus or minus a few hundred, sometime it was for example 37,876ºC LOL

The first time I got this problem I had 2 alarms going off in Real Temp
Warranty Void
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
i3 530 @ 4.440 Gigabyte P55A UD3 GTX 470 40GB Maxtor IDE Raid 0, 1TB SSD 
Optical DriveOSMonitorKeyboard
Sony Optiarc DVDR/CDR SATA Windows 7 Pro X64 Acer 23" 1080P ABS M1 
PowerCaseMouseMouse Pad
Cooler Master 600 HAF X9 Logitech G500 desktop 
  hide details  
Reply
Warranty Void
(13 items)
 
  
CPUMotherboardGraphicsHard Drive
i3 530 @ 4.440 Gigabyte P55A UD3 GTX 470 40GB Maxtor IDE Raid 0, 1TB SSD 
Optical DriveOSMonitorKeyboard
Sony Optiarc DVDR/CDR SATA Windows 7 Pro X64 Acer 23" 1080P ABS M1 
PowerCaseMouseMouse Pad
Cooler Master 600 HAF X9 Logitech G500 desktop 
  hide details  
Reply
post #672 of 711
RPM666, keep in mind that's under phase and it's barely stable for benching, had to actually shut down for a bit to let the compressor cool down. Anyway, settings are as follows under P09 (not my favorite bios by the way):

CPU Features
PPM ...............................: Enabled
EIST ..............................: Enabled
CxE................................: Disabled
Execute Disable Bit ...............: Disabled
Virtualization.....................: Disabled
Hyper Threading ...................: Enabled
Active Processor Cores ............: All
Current Feedback Override .........: Disabled
Memory Settings
Memory Controller Settings
IMC Configuration .................: Enabled
Channel Congifuration .............: Independant
Channel Interleaving ..............: 6 Way
Rank Interleaving .................: 4 Way
Memory Timings
Extreme Memory Profile XMP ........: Disabled
DRAM Timing Control ...............: Manual
tCL (CAS Latency) .................: 8T
tRCG (RAS to CAS Delay) ...........: 8T
tRP (RAS Precharge) ...............: 8T
tRAS (Precharge Delay) ............: 24T
CR (Command Rate) .................: 1T
tRFC (Refresh Cycle Time) .........: Auto
tWR (Write Recovery Time) .........: Auto
tWTR (Write to Read Delay) ........: Auto
tRRD (RAS to RAS Delay) ...........: Auto
tRTP (Read to Precharge) ..........: Auto
All Voltage Settings
CPU Voltages
CPU Core Voltage ..................: 1.46v (not sure of what I had to add to get to this)
CPU Target Core Voltage ...........:
CPU Vdroop Compensation ...........: Disabled
CPU VTT (UnCore) Voltage ..........: 1.45v
1.8 PPL Voltage Setting ...........: 1.800v
CPU Clock Amplitude Ctrl ..........: 0.800v
Memory Voltages
DRAM Voltage ......................: 1.63v
DIMM1 Vref CA (Addresses) .........: 0.500 Default
DIMM1 Vref DQ (Data) ..............: 0.500 Default
DIMM2 Vref CA (Addresses) .........: 0.500 Default
DIMM2 Vref DQ (Data) ..............: 0.500 Default
DIMM3 Vref CA (Addresses) .........: 0.500 Default
DIMM3 Vref DQ (Data) ..............: 0.500 Default
Chipset Voltages
X58 IOH Core Voltage .............: 1.26v
X58 IOH VCCA 1.1V ................: 1.25v
X58 IOH VCCA 1.5V ................: 1.506v
ICH10 SB Voltage .................: 1.506v

CPU Turbo .........................: Always On
System Turbo ......................: Enabled
Clock Speed Control Center
CPU Bclock (FSB) ................: 231
QPI Link Fast Mode ..............: Enabled
QPI Multiplier ..................: x18
QPI Target Speed ................: lowest setting
CPU Core Multiplier .............: x20
CPU Core Target Speed ...........:
CPU Uncore Multiplier ...........: x16
CPU Uncore Target Speed .........: not sure what it actually comes out too, but it needs to be at least twice you memory.
Memory Bus Multiplier ...........: x8
Memory Bus Target Speed .........: 1848mhz
CPU Clock Skew ..................: 0ps
IOH Clock Skew ..................: 0ps
PCIe 105Mhz

Again, I do not run this for 24/7 but just to try and bench. Still working on it, but it should give you an idea. I may try Bios G25 instead, some seem to have better luck with it.
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
post #673 of 711
If I only have 1 video card, can I use it in the lower red slot?

is there an audio out that I can connect to the video card?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 3931A 4.15Ghz Bloodrage Saphire 4870 1g Gskill RipJaws 3x22000 gigs at 1600 7-7-7-20 
Hard DriveOptical DriveOSMonitor
hitachi 500gx3 lite-on blu-ray 8x Win7 x64 BenQ 2400w 
PowerCase
Corsair 620 Hx CM Sniper 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 3931A 4.15Ghz Bloodrage Saphire 4870 1g Gskill RipJaws 3x22000 gigs at 1600 7-7-7-20 
Hard DriveOptical DriveOSMonitor
hitachi 500gx3 lite-on blu-ray 8x Win7 x64 BenQ 2400w 
PowerCase
Corsair 620 Hx CM Sniper 
  hide details  
Reply
post #674 of 711
Quote:
Originally Posted by Autox View Post
If I only have 1 video card, can I use it in the lower red slot?

is there an audio out that I can connect to the video card?
Yes you can use it in the lower slot. I've heard it can improve temps too.
Reborn Legacy
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4.1 Ghz Foxconn Bloodrage 2 x OEM 5870 OCZ Platinum 6GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 2 x Caviar Black (RAID 0) Samsung SH-S223L Prolimatech Megahalems 
CoolingCoolingOSMonitor
Delta AFC1212DE 5 x Coolermaster R4 (red LED) Windows 7 Pro Dell U2412M 
MonitorMonitorKeyboardPower
Asus VW223T Mitsubishi Diamond Pro 710s Leopold FC200RT/KB (tactile touch with blank keys) Corsair TX850W 
CaseMouseMouse PadAudio
Reborn Legacy (mod) Razer Deathadder Rocketfish Beyerdynamic DT 990 Pro 
AudioAudioAudio
M-Audio MobilePre M-Audio BX5a Audio Technica ATH-M50 
  hide details  
Reply
Reborn Legacy
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4.1 Ghz Foxconn Bloodrage 2 x OEM 5870 OCZ Platinum 6GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 2 x Caviar Black (RAID 0) Samsung SH-S223L Prolimatech Megahalems 
CoolingCoolingOSMonitor
Delta AFC1212DE 5 x Coolermaster R4 (red LED) Windows 7 Pro Dell U2412M 
MonitorMonitorKeyboardPower
Asus VW223T Mitsubishi Diamond Pro 710s Leopold FC200RT/KB (tactile touch with blank keys) Corsair TX850W 
CaseMouseMouse PadAudio
Reborn Legacy (mod) Razer Deathadder Rocketfish Beyerdynamic DT 990 Pro 
AudioAudioAudio
M-Audio MobilePre M-Audio BX5a Audio Technica ATH-M50 
  hide details  
Reply
post #675 of 711
ok im starting to doubt my abilty to OC anything anymore. O have two 920's sitting here and neither will break 3.8 GHz. Ive tried vcore up to 1.45 and VTT all the way till it turns red. so 1.34v. No success highest is 3.78 GHz. I see all the i7's hitting 4 GHz i have 2 here 3910A & 3812B batches. Am i really that unlucky to not have any good clocks with these 2!
    
CPUMotherboardGraphicsRAM
Intel Core i7 930 [4.33 Ghz] EVGA X58 SLI LE EVGA GTS 450 [SLI] 6 GB DDR 3 OCZ 1600 [1T-7-8-7-18 @ 1474] 
Hard DriveOptical DriveOSMonitor
Vertex 2 [120 GB] + 4x WD Green 2 TB [Raid1] Samsung BD-R [12x] Microsoft Windows 7 Pro [x64] [3] Samsung SyncMaster 2233sw 
KeyboardPowerCaseMouse
I-rocks Corsair HX650 [650W] Lian Li PC K62 Logi 
Mouse Pad
Metallica 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 930 [4.33 Ghz] EVGA X58 SLI LE EVGA GTS 450 [SLI] 6 GB DDR 3 OCZ 1600 [1T-7-8-7-18 @ 1474] 
Hard DriveOptical DriveOSMonitor
Vertex 2 [120 GB] + 4x WD Green 2 TB [Raid1] Samsung BD-R [12x] Microsoft Windows 7 Pro [x64] [3] Samsung SyncMaster 2233sw 
KeyboardPowerCaseMouse
I-rocks Corsair HX650 [650W] Lian Li PC K62 Logi 
Mouse Pad
Metallica 
  hide details  
Reply
post #676 of 711
vvt can go up to +700 under water and maybe more (i haven;t tried) if you want those real high clocks nearly everything is gonna be in the red quite frankly unless you have a super chip (which I dont)
post #677 of 711
Quote:
Originally Posted by sdla4ever View Post
ok im starting to doubt my abilty to OC anything anymore. O have two 920's sitting here and neither will break 3.8 GHz. Ive tried vcore up to 1.45 and VTT all the way till it turns red. so 1.34v. No success highest is 3.78 GHz. I see all the i7's hitting 4 GHz i have 2 here 3910A & 3812B batches. Am i really that unlucky to not have any good clocks with these 2!
What are your other voltages? Did you try to start out with 3.8, or did you gradually work your way up?

IMO it's less confusing if you start from scratch and work your way up.
Reborn Legacy
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4.1 Ghz Foxconn Bloodrage 2 x OEM 5870 OCZ Platinum 6GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 2 x Caviar Black (RAID 0) Samsung SH-S223L Prolimatech Megahalems 
CoolingCoolingOSMonitor
Delta AFC1212DE 5 x Coolermaster R4 (red LED) Windows 7 Pro Dell U2412M 
MonitorMonitorKeyboardPower
Asus VW223T Mitsubishi Diamond Pro 710s Leopold FC200RT/KB (tactile touch with blank keys) Corsair TX850W 
CaseMouseMouse PadAudio
Reborn Legacy (mod) Razer Deathadder Rocketfish Beyerdynamic DT 990 Pro 
AudioAudioAudio
M-Audio MobilePre M-Audio BX5a Audio Technica ATH-M50 
  hide details  
Reply
Reborn Legacy
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4.1 Ghz Foxconn Bloodrage 2 x OEM 5870 OCZ Platinum 6GB 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 2 x Caviar Black (RAID 0) Samsung SH-S223L Prolimatech Megahalems 
CoolingCoolingOSMonitor
Delta AFC1212DE 5 x Coolermaster R4 (red LED) Windows 7 Pro Dell U2412M 
MonitorMonitorKeyboardPower
Asus VW223T Mitsubishi Diamond Pro 710s Leopold FC200RT/KB (tactile touch with blank keys) Corsair TX850W 
CaseMouseMouse PadAudio
Reborn Legacy (mod) Razer Deathadder Rocketfish Beyerdynamic DT 990 Pro 
AudioAudioAudio
M-Audio MobilePre M-Audio BX5a Audio Technica ATH-M50 
  hide details  
Reply
post #678 of 711
Go here and try some of the bios settings listed:

http://www.xtremesystems.org/forums/...d.php?t=221939

You really should be able to get 200x21 with HT and turbo enabled at 1.36v vcore and 1.33v VTT and below on those batches. If those are C0 batches, try setting your multi to x19 with turbo enabled, it will still end up at x21, but for some reason the C0's like the odd multi's better. D0's should be fine with x20 and turbo enabled.
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
post #679 of 711
well everything else was at auto i mean the PCI freq. and multipliers except the fsb i tried 18 with turbo to 20 or 18 and a high fsb. iv tried 19 with turbo and not with turbo. Ill look at those setting is there something im just completely looking over?

Could it be the PCI freq? I have 3 hard drives, 1 raid array. and 2 GPU's? Is it i just have to much for the board to handle and clock high?
Edited by sdla4ever - 10/31/09 at 1:14am
    
CPUMotherboardGraphicsRAM
Intel Core i7 930 [4.33 Ghz] EVGA X58 SLI LE EVGA GTS 450 [SLI] 6 GB DDR 3 OCZ 1600 [1T-7-8-7-18 @ 1474] 
Hard DriveOptical DriveOSMonitor
Vertex 2 [120 GB] + 4x WD Green 2 TB [Raid1] Samsung BD-R [12x] Microsoft Windows 7 Pro [x64] [3] Samsung SyncMaster 2233sw 
KeyboardPowerCaseMouse
I-rocks Corsair HX650 [650W] Lian Li PC K62 Logi 
Mouse Pad
Metallica 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 930 [4.33 Ghz] EVGA X58 SLI LE EVGA GTS 450 [SLI] 6 GB DDR 3 OCZ 1600 [1T-7-8-7-18 @ 1474] 
Hard DriveOptical DriveOSMonitor
Vertex 2 [120 GB] + 4x WD Green 2 TB [Raid1] Samsung BD-R [12x] Microsoft Windows 7 Pro [x64] [3] Samsung SyncMaster 2233sw 
KeyboardPowerCaseMouse
I-rocks Corsair HX650 [650W] Lian Li PC K62 Logi 
Mouse Pad
Metallica 
  hide details  
Reply
post #680 of 711
What bios are you using? And list your settings here using this template:

CPU & Batch (XXX)
RAM Model (XXX)
Bios Ver: Quantum BIOS (XXX)

CPU Features
PPM :
EIST :
CxE :
Execute Disable Bit :
Virtualization :
Hyper Threading :
Active Processor Cores :
Memory Settings
Memory Controller Settings
IMC Configuration :
Channel Congifuration :
Channel Interleaving :
Rank Interleaving :
Memory Timings
Extreme Memory Profile XMP :
Memory Profile Select :
DRAM Timing Control :
tCL (CAS Latency) :
tRCG (RAS to CAS Delay) :
tRP (RAS Precharge) :
tRAS (Precharge Delay) :
CR (Command Rate) :
tRFC (Refresh Cycle Time) :
tWR (Write Recovery Time) :
tWTR (Write to Read Delay) :
tRRD (RAS to RAS Delay) :
tRTP (Read to Precharge) :
All Voltage Settings
CPU Voltages
CPU Core Voltage :
CPU Target Core Voltage :
CPU Vdroop Compensation :
CPU VTT (UnCore) Voltage :
1.8 PPL Voltage Setting :
CPU Clock Amplitude Ctrl :
Memory Voltages
DRAM Voltage :
DIMM1 Vref CA (Addresses) :
DIMM1 Vref DQ (Data) :
DIMM2 Vref CA (Addresses) :
DIMM2 Vref DQ (Data) :
DIMM3 Vref CA (Addresses) :
DIMM3 Vref DQ (Data) :
Chipset Voltages
X58 IOH Core Voltage :
X58 IOH VCCA 1.1V :
X58 IOH VCCA 1.5V :
ICH10 SB Voltage :
OC Gear : Skipping this part
CPU Turbo :
System Turbo :
Clock Speed Control Center
CPU Bclock (FSB) :
QPI Link Fast Mode :
QPI Multiplier :
QPI Target Speed :
CPU Core Multiplier :
CPU Core Target Speed :
CPU Uncore Multiplier :
CPU Uncore Target Speed :
Memory Bus Multiplier :
Memory Bus Target Speed :
CPU Clock Skew :
IOH Clock Skew :
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Foxconn Bloodrage Overclocking/Help Thread