Quote:
|
i runned a gulftown Q3QP @ 4,75Ghz idle at 8°C and load at 28°C while ambient room temp was 22°C a 23°C.
what are your temps ? |

KusH, did you replace the Thermal grease with AS5? and unscrewed the TEC's without a torque driver? The TEC's need to be fastened with a specific amount of pressure, otherwise they will die on you much faster.
As for the AS5, if you Google a bit, you will find some posts suggesting that AS5 is bad for ceramic tec's because it can leach into the ceramic and that AS5 is ok for the hot side but it requires 200 hours to cure properly. It is a definite no no for the cold side as it seems not to like cold that much.
EDIT:
BTW KusH, by replacing the pump and the CPU-block will drop your load temps for sure.
Edited by XenoMopH - 12/29/10 at 1:54am












I'm jealous lol. On a 64person server I get 25-55fps on ultra settings with 4xMSAA, and 35-65fps on lowest settings 