Overclock.net › Forums › AMD › AMD CPUs › Phenom II steppings and max OC 550-940
New Posts  All Forums:Forum Nav:

Phenom II steppings and max OC 550-940 - Page 16

post #151 of 2829
Quote:
Originally Posted by pow3rtr1p View Post
I finally seem to have gotten 3.64 GHz stable now. Seeing as I was running my E8400 at 3.6 GHz, and now I have a faster Quad, looks like I actually got a decent upgrade.

I am still fiddling with voltages. I was getting memory dump BSODs, so I upped both the RAM and CPU. I may be able to back the CPU off a notch, but we'll see. I'm still going to keep pushing higher, since my temps are still perfectly safe. At first, this rig was irritating me, thanks to DFI's pickiness with RAM settings. Now, however, I am having a blast seeing how far I can push this chip. 4 GHz, perhaps?

Just a quick question, though. Are you NB and HT voltages only dependent on their overall clocks (so, if they are running at 1500 MHz each, no voltage increase) or would do you have to change voltages based on FSB? I am fine running them below stock speeds if it means lower voltages and a higher CPU OC.

I will post a screeny when it gets through this round of Prime 95.

[edit]

Here's the screenshot.

I'm still updating, but pow3rtr1p, how come your CPU-Z says you have a 940...? Also, have you tried tightening your timings?? You're at DDR2-693 @ 5-5-5-15 on G.skill PI's that you shoulda been able to tighten up @ DDR2-800 in the fist place. This might be one of your problems right now. See what the exact production code for those sticks are and do some research on what others have been able to do with them... might help you out in the long run!
Edited by oneluvballer21 - 1/17/09 at 5:17pm
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
post #152 of 2829
Quote:
Originally Posted by oneluvballer21 View Post
I'm still updating, but pow3rtr1p, how come your CPU-Z says you have a 940...?
That is the socket I believe.
The Beast
(20 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 4770k 4.5 MSI Z87-G45 MSI GeForce 980 GTX MSI GeForce 980 GTX 
RAMHard DriveHard DriveHard Drive
G.SKILL TridentX Series DDR3 2400 Samsung 840 Pro 256 GB Samsung 840 Pro 512 GB WD Black 1 TB 
Optical DriveOSMonitorMonitor
2 Samsung 22x DVD burners 1 w/ LS Windows 8.1 x64 Hp Pavilion 27xi Hp Pavilion 27xi 
MonitorKeyboardPowerCase
HP 24in. HD Logitech G710+ CORSAIR CMPSU-1000HX Antec 1200 
MouseMouse PadAudioOther
Logitech G600 5L Steel Turtle Beach PX22 Noctua NH-D15 2 x Thermalright TY-143 
  hide details  
Reply
The Beast
(20 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 4770k 4.5 MSI Z87-G45 MSI GeForce 980 GTX MSI GeForce 980 GTX 
RAMHard DriveHard DriveHard Drive
G.SKILL TridentX Series DDR3 2400 Samsung 840 Pro 256 GB Samsung 840 Pro 512 GB WD Black 1 TB 
Optical DriveOSMonitorMonitor
2 Samsung 22x DVD burners 1 w/ LS Windows 8.1 x64 Hp Pavilion 27xi Hp Pavilion 27xi 
MonitorKeyboardPowerCase
HP 24in. HD Logitech G710+ CORSAIR CMPSU-1000HX Antec 1200 
MouseMouse PadAudioOther
Logitech G600 5L Steel Turtle Beach PX22 Noctua NH-D15 2 x Thermalright TY-143 
  hide details  
Reply
post #153 of 2829
Quote:
Originally Posted by pun3D View Post
That is the socket I believe.
Yup, AM2 / AM2+ are sometimes referred to as 940, since it's the number of pins.
    
CPUMotherboardGraphicsRAM
i7 4790k @ 4.7GHz Asus Z97 Pro Gaming EVGA 1080 Ti FTW3 @ 2050 MHz 32GB G Skill Sniper DDR3-2133 
Hard DriveHard DriveHard DriveOptical Drive
Intel 600p m.2 512GB Crucial M500 SSD 960GB Toshiba X300 HDD 3TB LG Blu Ray Burner 
CoolingOSMonitorMonitor
Cooler Master Nepton 240m Windows 10 Pro Samsung 34" Curved Ultrawide (3440x1440) Samsung 22" Portrait (1080x1920) 
KeyboardPowerCaseMouse
Poker II Cherry MX Brown, KBParadise V80 Cherry... EVGA G2 650W Cooler Master Silencio 652s Steelseries Sensei Wireless 
Mouse PadAudioAudio
Tekmat SIG 556 SMSL Q5 Pro DAC Bowers & Wilkins DM601 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4790k @ 4.7GHz Asus Z97 Pro Gaming EVGA 1080 Ti FTW3 @ 2050 MHz 32GB G Skill Sniper DDR3-2133 
Hard DriveHard DriveHard DriveOptical Drive
Intel 600p m.2 512GB Crucial M500 SSD 960GB Toshiba X300 HDD 3TB LG Blu Ray Burner 
CoolingOSMonitorMonitor
Cooler Master Nepton 240m Windows 10 Pro Samsung 34" Curved Ultrawide (3440x1440) Samsung 22" Portrait (1080x1920) 
KeyboardPowerCaseMouse
Poker II Cherry MX Brown, KBParadise V80 Cherry... EVGA G2 650W Cooler Master Silencio 652s Steelseries Sensei Wireless 
Mouse PadAudioAudio
Tekmat SIG 556 SMSL Q5 Pro DAC Bowers & Wilkins DM601 
  hide details  
Reply
post #154 of 2829
Quote:
Originally Posted by pun3D View Post
That is the socket I believe.
Derrrrrr....... not enough sleep last night

@ PatrickVanHelden: You showed some screenies back a couple pages (#125) and when you were at 16.5x 223 you RAM was almost at 600MHz (DDR2-1200)... now I know you have DDR2-1150 sticks, but maybe they just can't do 1200... or maybe you need to raise CAS to 6 in order to get there.

@ pun3D: please post all your necessary system specs, I wanna get you in the database... throw me a CPU-Z screenie too, with both CPU and memory tabs open. Thanks, and keep up the nice work!

@ karaya: can you post your system specs for me, and I'll add you to the list...?

Almost done updating... except I'm adding OS, so I gotta go back and find what everyone is on... hopefully everyone has it in their sig, and if its 32 or 64-bit...

Is everyone hitting the 3.7 wall at 1.5v for CPU-NB...? Anyone try raising that?
Edited by oneluvballer21 - 1/17/09 at 6:00pm
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
post #155 of 2829
Quote:
Originally Posted by oneluvballer21 View Post
Derrrrrr....... not enough sleep last night

@ PatrickVanHelden: You showed some screenies back a couple pages (#125) and when you were at 16.5x 223 you RAM was almost at 600MHz (DDR2-1200)... now I know you have DDR2-1150 sticks, but maybe they just can't do 1200... or maybe you need to raise CAS to 6 in order to get there.

@ pun3D: please post all your necessary system specs, I wanna get you in the database... throw me a CPU-Z screenie too, with both CPU and memory tabs open. Thanks, and keep up the nice work!

@ karaya: can you post your system specs for me, and I'll add you to the list...?

Almost done updating... except I'm adding OS, so I gotta go back and find what everyone is on... hopefully everyone has it in their sig, and if its 32 or 64-bit...

Is everyone hitting the 3.7 wall at 1.5v for CPU-NB...? Anyone try raising that?
I tried all the way to 1.6V on the CPU, and 1.45V on the NB. Just couldn get even a clean boot. And now, my Vista install is corrupted, lol. Good thing it was an almost new install to begin with.
    
CPUMotherboardGraphicsRAM
i7 4790k @ 4.7GHz Asus Z97 Pro Gaming EVGA 1080 Ti FTW3 @ 2050 MHz 32GB G Skill Sniper DDR3-2133 
Hard DriveHard DriveHard DriveOptical Drive
Intel 600p m.2 512GB Crucial M500 SSD 960GB Toshiba X300 HDD 3TB LG Blu Ray Burner 
CoolingOSMonitorMonitor
Cooler Master Nepton 240m Windows 10 Pro Samsung 34" Curved Ultrawide (3440x1440) Samsung 22" Portrait (1080x1920) 
KeyboardPowerCaseMouse
Poker II Cherry MX Brown, KBParadise V80 Cherry... EVGA G2 650W Cooler Master Silencio 652s Steelseries Sensei Wireless 
Mouse PadAudioAudio
Tekmat SIG 556 SMSL Q5 Pro DAC Bowers & Wilkins DM601 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4790k @ 4.7GHz Asus Z97 Pro Gaming EVGA 1080 Ti FTW3 @ 2050 MHz 32GB G Skill Sniper DDR3-2133 
Hard DriveHard DriveHard DriveOptical Drive
Intel 600p m.2 512GB Crucial M500 SSD 960GB Toshiba X300 HDD 3TB LG Blu Ray Burner 
CoolingOSMonitorMonitor
Cooler Master Nepton 240m Windows 10 Pro Samsung 34" Curved Ultrawide (3440x1440) Samsung 22" Portrait (1080x1920) 
KeyboardPowerCaseMouse
Poker II Cherry MX Brown, KBParadise V80 Cherry... EVGA G2 650W Cooler Master Silencio 652s Steelseries Sensei Wireless 
Mouse PadAudioAudio
Tekmat SIG 556 SMSL Q5 Pro DAC Bowers & Wilkins DM601 
  hide details  
Reply
post #156 of 2829
Quote:
Originally Posted by oneluvballer21 View Post

@ pun3D: please post all your necessary system specs, I wanna get you in the database... throw me a CPU-Z screenie too, with both CPU and memory tabs open. Thanks, and keep up the nice work!

Is everyone hitting the 3.7 wall at 1.5v for CPU-NB...? Anyone try raising that?
I havent touched the CPU VID yet. I got to 3.7 on 1.4 vcore. Then I went for 3.8 and it was taken crazy amout of vcore so I just stopped. i was thinking that mayb i need to start playing witht eh VID but a few others with x64 are hitting the 3.7 so mayb its not me.

I will post everything for you when I get a chance I really dont use my sig much other wise I would have dont it already tomorow i promise to have it.
The Beast
(20 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 4770k 4.5 MSI Z87-G45 MSI GeForce 980 GTX MSI GeForce 980 GTX 
RAMHard DriveHard DriveHard Drive
G.SKILL TridentX Series DDR3 2400 Samsung 840 Pro 256 GB Samsung 840 Pro 512 GB WD Black 1 TB 
Optical DriveOSMonitorMonitor
2 Samsung 22x DVD burners 1 w/ LS Windows 8.1 x64 Hp Pavilion 27xi Hp Pavilion 27xi 
MonitorKeyboardPowerCase
HP 24in. HD Logitech G710+ CORSAIR CMPSU-1000HX Antec 1200 
MouseMouse PadAudioOther
Logitech G600 5L Steel Turtle Beach PX22 Noctua NH-D15 2 x Thermalright TY-143 
  hide details  
Reply
The Beast
(20 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 4770k 4.5 MSI Z87-G45 MSI GeForce 980 GTX MSI GeForce 980 GTX 
RAMHard DriveHard DriveHard Drive
G.SKILL TridentX Series DDR3 2400 Samsung 840 Pro 256 GB Samsung 840 Pro 512 GB WD Black 1 TB 
Optical DriveOSMonitorMonitor
2 Samsung 22x DVD burners 1 w/ LS Windows 8.1 x64 Hp Pavilion 27xi Hp Pavilion 27xi 
MonitorKeyboardPowerCase
HP 24in. HD Logitech G710+ CORSAIR CMPSU-1000HX Antec 1200 
MouseMouse PadAudioOther
Logitech G600 5L Steel Turtle Beach PX22 Noctua NH-D15 2 x Thermalright TY-143 
  hide details  
Reply
post #157 of 2829
Updated (finally!). And now I gotta go shower and get ready for a nice dinner on the town... I knew I wasn't gonna get to play with the new toys until the end of the weekend...
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II 940 Foxconn Destroyer SLI EVGA GTX 295's (x2) 4x 2gb Geil EVO ONE DDR2-800 
Hard DriveOSMonitorPower
2x WD6400AAKS RAID-0 Vista Home Premium x64 25.5" LG W2600H-PF Enermax Revolution+85 1050W 
Case
Thermaltake Mozart TX 
  hide details  
Reply
post #158 of 2829
Well, I have an update...

CPU: 3528 MHz (252x14)
NB: 2520 MHz (252x10)
HT-Link: 2520 MHz (252x10)

CPU @ 1.425V
CPU-NB @ 1.275V
NB-Core @ 1.24V
HT-Link @ 1.24V

Edit: I need to clear some things up, we have had a misunderstanding as I just seen the updated list. Settings above has been cleared up to remove misunderstanding

And by how the OS's is scrambled through the list, I think we can rule out that the OS being used is not the limiting factor on these chips (or not so much)...

Finnaly broke 20,000 in 3DMark06



Edited by Gen - 1/17/09 at 7:49pm
Sig Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Crosshair IV Formula Powercolor 7870 16GB G.SKILL Sniper 
Hard DriveOSMonitorPower
Plextor PX-M3S SSD Windows 7 Professional 64-bit 23" Acer 1920x1080 1000 Watt Ultra X3 
Case
Zalman GS1000 
  hide details  
Reply
Sig Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Crosshair IV Formula Powercolor 7870 16GB G.SKILL Sniper 
Hard DriveOSMonitorPower
Plextor PX-M3S SSD Windows 7 Professional 64-bit 23" Acer 1920x1080 1000 Watt Ultra X3 
Case
Zalman GS1000 
  hide details  
Reply
post #159 of 2829
I got mine @ 3.8 just by upping the multi x19 and giving the ***** 1.55v.
Prime Stable. Watercooling though.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 1090t @ 4ghz Asus M4N98TD - EVO Msi gtx 560TI SLI 8 gig's Kingston HyperX 1600 8-9-8-24 
Hard DriveOSMonitorKeyboard
Primary: 2x intel ssd RAID 0 360mb/s read Windows 7 Ultimate x64 ACER V243HQ 24" logitech 
PowerCaseMouseMouse Pad
coolermaster ultimate 1000 watt Antec 1200 logitech Steelseries 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 1090t @ 4ghz Asus M4N98TD - EVO Msi gtx 560TI SLI 8 gig's Kingston HyperX 1600 8-9-8-24 
Hard DriveOSMonitorKeyboard
Primary: 2x intel ssd RAID 0 360mb/s read Windows 7 Ultimate x64 ACER V243HQ 24" logitech 
PowerCaseMouseMouse Pad
coolermaster ultimate 1000 watt Antec 1200 logitech Steelseries 
  hide details  
Reply
post #160 of 2829
I got 3.4 GHz on stock volts, 1.35V I do beleive. Tried for 3.5 and had increase volts to 1.425, then tried 3.6 took 1.475V to get into Windows, was to scared scared to test it, idle temps was 45C, I's hate to see what load would have been...
Sig Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Crosshair IV Formula Powercolor 7870 16GB G.SKILL Sniper 
Hard DriveOSMonitorPower
Plextor PX-M3S SSD Windows 7 Professional 64-bit 23" Acer 1920x1080 1000 Watt Ultra X3 
Case
Zalman GS1000 
  hide details  
Reply
Sig Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS Crosshair IV Formula Powercolor 7870 16GB G.SKILL Sniper 
Hard DriveOSMonitorPower
Plextor PX-M3S SSD Windows 7 Professional 64-bit 23" Acer 1920x1080 1000 Watt Ultra X3 
Case
Zalman GS1000 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Phenom II steppings and max OC 550-940