Originally Posted by pun3D
No my room is basically the same temp. Mayb I should try the battery. Because I only needed +.075 to the vcore for 3.7. Now I cant get anything.
seeing as how you and me have the same board, try my settings.
set the HT for 1.8ghz, multi at 19, fsb at 206 or you can just keep at 200, memory clock you can keep it at 1066 or whatever speed u want since even if you did up the speed, its so minimal that it wont affect the overclock.
My northbridge voltage is at 1.35, you can set the memory voltage to what your memory runs at. My cpu core voltage is set at 1.55 so its a +.200, I dont know if you want to run at 1.55volts, but it made me go to the speed I am at now.
Though I will warn you that you have to use your own discretion when using these settings
since it works on mines, it might not work for your setup.