I am 24/7 stable on OCCT Small, OCCT Large, and OCCT 64-bit Linpack 90% Free Memory. I ran 4 passes of MemTest86+. There is a discrepancy between my memory/timings and QPI/NB speeds shown in the verification because my real RAM is being RMA'd as it was apart of that world-wide recall. So I am using my friends crappier RAM until I get my stuff back, I'll do another verification when I get my good RAM back!
CPU 210x21 = 4400MHz
RAM 210x8 = 1680MHz (7-7-7-20)
NB 210x19 = 3990MHz
QPI 210x18 = 3780MHz (7.56 GT/s)
Motherboard: X58 Classified
Cooling: Water, (CPU + Chipset)
All other voltages at Stock. The DRAM is at stock but my mobo puts it about 30mv higher than it's setting of "1.5v". Both my VTT and VCore are set to 1.4, however the VCore measures 1.406 under load. The BIOS reports my VTT being 1.49v, which is a lot higher than it really is.
**(measured with mutli-meter under full load 0.5% +/- accuracy)
My temps are 72c during Linpack, and 65c during OCCT. My VREG's are pretty cool and stay around 50-55c depending on load. I live in an non-air conditioned dorm room with higher than normal ambient temps in the summer. Edited by Kuntz - 8/4/09 at 12:54am