Can`t seem to get much past 3.9ghz on this c2 chip:/
Havent passed 44c on any OC yet , but I can`t seem to get it stable over 4ghz:S
Reverted the ram and all voltages back to stock settings in an
effort to inch my way to results (a bit cowboy testing in the start)
This is my highest "stable" OC (1 hour burn-in) @ stock volt settings.
Enabling LLC (load line calibration) won`t let me OC further but
it does not effect the overall stability.
Been experimenting with the NB and cpu/nb volt to no avail.
Upping the FSB 250+ and keeping the same clock settings
did not effect stability @3.9ghz but would not run stable @ 4ghz.
Experimenting with AAC which I have never done before,
setting core 0,1 to -4% and core 3,4 to +4% seemed to increase
performance but did not allow any higher clock speeds so Im leaving
this one off for now. (If anyone can explain in some detail what this
feature does I would be most grateful)
The watercooling I installed last night is doing its job, but I can`t
seem to provide enough "juice" to the CPU without creating instability.
The system boots on 4.3ghz, but won`t boot to desktop on 4.1 and 4.2ghz
And the system reports 0mhz when setting it to 4.2ghz.
Still early on with the OC`ing but I am a bit disappointed with the
prelimenary results even for this 140w tdp chip.
Would be grateful to any tips/hints