Dfi lanparty dk 790fxb-m3h5

DFI LANPARTY DK 790FXB-M3H5
Note: There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items(shown as *)
Genie Bios Settings
Onboard Devices..........Sub Menu  [Press Enter ]
Onboard Lan1.........................: [Enabled]
[B}DRAM Configuration...... Sub Menu  [Press Enter ][/b]
MCT Memory Timing ...... Sub Menu  [Press Enter ]
MCT Memory Timing ...................: [Auto]/[Enabled]
2T Mode.................: [Auto]/[Enabled]
CAS Latency Time.....................:7
Precharge delay (tRAS)...............: 19
DRAM RAS# Precharge..................:7
DRAM RAS#  to CAS# Delay.............7:
Bank to Bank Cmd (TRRD)..............: 4
TRC..................................:26
TRTP*................................: 4
Write Recovery (TWR)*.............10...:
Write-Read Command (TWTR)*......4.....:
TRFCO.................................: [110.0ns]
TRFC1 ................................: [110.0ns]
TRFC2 .................................: [Auto]
TRFC3..................................: [[Auto]
Trdrd*.................................:  [[Auto]
TrwtTO* ..............................:[Auto]
Twrrd*.................................: [Auto]
Twrwr*................................: [Auto]
Bank Swizzle Mode....................: [Enabled]
Auto Tweak Performance...............: [Enabled]
Optimal Performance Mode.............: [Enabled]

ODC Control........... Sub Menu  [Press Enter]
Output Driver Comp...................: [Auto]
Channel A
CPU On-die Termination..............:[240 ohms +/-20%][120 ohms +/-20%][60 ohms +/-20%]
DOS Drive Strength ...................:[1.00x]
Data Drive Strength  .................:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength....................: [1.50x]
Channel B
CPU On-die Termination..............:[240 ohms +/-20%][120 ohms +/-20%][60 ohms +/-20%]
DOS Drive Strength ...................:[1.00x]
Data Drive Strength  .................:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength....................: [1.50x]
----------------------Dram Configuration--------------------------
DCTs Mode...............................: [Ganged]
CKE base power down mode.........:[ Enabled] 
CKE based power down...............: [Per Channel]

HT Link Control ........ Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
IH Flow-Control Mode................: [Disable]
HI Link Tristate*......................:[Disable]
UnitiD Clumping........................: [Disable]

CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [All Cores]
Value  (All Cores)) - 
x Value (Core 8)....................: -2% 
x Value (Core 2)....................: - 2% 
x Value (Core 1)....................: - 2% 
x Value (Core 3)....................: -2% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Auto]
AND CPU stepping....................: P0

PWM Setting............ Sub Menu  [Press Enter ]
PWM Control.........................:[ Enabled]
CPU VII Special Add .................:+0.075mv
CPU NB VID Special Add..............: Auto
DRAM Voltage Control ...............:1.635v
SB PLL 1.2V Voltage.................:1.20v 
NB PCI! Voltage.....................:1.25v
NB Core Voltage.....................:1.12v 
NB HT Voltage.......................:1.270v 

------------------Main Genie Menu------------------------
Memory Current Vallue...............: Mhz
Timing Mode.........................:[Enabled]
Memory Clock value or Limit.........:[DDR3 1333]
AMD KB Cool & Quiet control.........: [Disabled]
CPU Clock Ratio.....................: 15x
CPU NB Clock Ratio..................: 10x
HT Link Frequency ..................:20000
O.C. Fail retry Counter.............:1 
O.C. Fail CMOS Reload ..............:[Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 220
CPU Host,HTT  Adjust Gap............: 5
PCI Clock ..........................:103