ok today i went out and bought a new graphics card after i installed it i tried to switch the computer on and nothing. so i removed it and replaced my old card,
still nothing,
i then checked all connections,
all connected as they should be,
the motherboard has some of its l.e.ds on,
the dimm slot indicators and the bios select led and no cpu or case fan or hd spool,
the mobo is an xfx 750a sli.
to check and see if it was the motherboard or psu that was giving trouble i removed the mobo and fitted my old ecs 6100mp v2.
this board when switched on,
the cpu fan and the case fans come on,
but no hd spool and it appears the chipset is not active. this to me looks like i have a psu problem which wires boot up the system?
i have a multimeter to check voltages
still nothing,
i then checked all connections,
all connected as they should be,
the motherboard has some of its l.e.ds on,
the dimm slot indicators and the bios select led and no cpu or case fan or hd spool,
the mobo is an xfx 750a sli.
to check and see if it was the motherboard or psu that was giving trouble i removed the mobo and fitted my old ecs 6100mp v2.
this board when switched on,
the cpu fan and the case fans come on,
but no hd spool and it appears the chipset is not active. this to me looks like i have a psu problem which wires boot up the system?
i have a multimeter to check voltages












