These are better pictures of my rig, had to use foggy smart camera on my brother's phone before:
[QUOTE=MlbrottarN;9604462]The front mod was done by Removing the HDD-cage and cutting a Rad+fan sized hole in the bottom part of the 5.25" Drivebay area aswell as a 140mm wide in the front where the Red fan is currently located.
i dont really get that. This is what I have done so far:
cut out the X at the front to mount 120mm at the front.
this is how long the width between HDD bay and front is
how I did it
is it possible to shift the HDD bay forward/backwards a bit? Or I may use this http://www.pccasegear.com/index.php?...oducts_id=8560
it looks ok and I only have one HDD anyways, but it is preferrable if there is a way to shift the HDD bay around.
Isn't there enough space in the 5 and 1/4 bays to fit a 120mm fan and RAD already? Or are you referring to the bottom or floor of the 5.25" bay?
EDIT: also, I have removed the dust proof foam at the front as the fan blades of the front fan will get caught in it and rubs against it. So I decided to glue it lightly to the Cross plastic grill I cut off before.
I wedged it at the back of the left side of the HDD bay, the cables press it against the bay.
it covers up a big area and catches dust, it seems to be working! (even though the space between HDD bay is quite dusty ==")
doesn't crash into anything and fits well to the plastic cross ; )Edited by LokSupguller - 6/11/10 at 5:01am