Originally Posted by ArmageddonAsh
im paranoid, want the best temps (within Â£Â£Â£)
so it can be connected to the PSU, will that be using the wire thing (what other things are connected to, such as fans) or DIRECTLY to the PSU (such as GPU)
you would need something like this to run off the PSU.
more often than not if you buy a new fan their will be something like it in the box. and i think the scout comes with one or two but i could be mistaken... haven't looked at the hardwear pack in a while lol. ill run down and look
i just went and looked at the wiring for my scout and you can leave the red LED fan attached the way it is so that its running off the LED switch button on the front. but the things i was thinking of in the little white box have the wrong end on them
so in your situation what i would do (if you go with the H50) is plug the pump into the CPU header (and set it too always be at %100) then attach the red fan to the front of the rad blowing out the back of the rad into the H50 stock fan blowing out the back of the case.
the red fan would be plugged into the big harness the way it is normally would be and i would stick the H50 fan on the closest header on the mobo.
(this is assuming you dont have the PSU adapter or a fan controller)Edited by Striker36 - 7/14/10 at 7:58am