Got my H50 today so went about installing it.
New piece of advice: don't let your friend do the thermal paste
, when I let him do the install for my cpu and 212+ he pretty much emptied the entire tube it seems cus I took the cooler off today and most of the TIM was down the sides XD Good job its MX-2 and non conductive cus it got on the damn pins.
So after an hour or so of cleaning the mess up I started installing the H50, dear god are those tubes stiff, makes it rather difficult to do things precisely.
Finally got it installed, I have also made every case fan an intake as the H50 is an exhaust with 2 gentle typhoon 1850's on it so they are shifting alot of air anyway, switched the top fan to intake as well as having it as an exhaust was interfering with the airflow to the H50.
Got some pics here:
Temps were idiling around 31c as you can see whilst on the desktop, after loading up firefox and uploading the images it went upto 33c-34c.
Better than my 212+ by about 4-5c so far, hopefully when the amd 6xxx series comes out I can get my 6850 and reduce the temps cus ive got 2 graphics cards putting out about 45c each on idle atm.