Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] The CoolerMaster Storm Scout, Scout II Club
New Posts  All Forums:Forum Nav:

[Official] The CoolerMaster Storm Scout, Scout II Club - Page 2102

Poll Results: What is your Overall Opinion on this case

 
  • 49% (929)
    Great
  • 30% (573)
    Good
  • 12% (226)
    Meh
  • 1% (27)
    Bad
  • 5% (108)
    SUX
1863 Total Votes  
post #21011 of 28613
Quote:
Originally Posted by clam85;13441305 
I'm such a noob.
Now I've connected the fans, I still have loads of cables left;
4x 6+2pin PCI-e Connector
9x sata connector
1x 4pin floppy connector

I can guess what these are for, but I just want to make sure.
*Keep in mind that this is the 1st pc I'm building*

Like you need help connecting everything?

PCI-E connector should go to your graphics card
And the SATA power should go to your HDD and DVD drive and then the SATA cable from the HDD and DVD drive to the mother board.
Uh idk what to do with the floppy connector unless you have a floppy drive
post #21012 of 28613
Quote:
Originally Posted by LostRib;13442053 
Like you need help connecting everything?

PCI-E connector should go to your graphics card
And the SATA power should go to your HDD and DVD drive and then the SATA cable from the HDD and DVD drive to the mother board.
Uh idk what to do with the floppy connector unless you have a floppy drive

Thank you!!
I know what to do now!

lol....Floppy disks....
post #21013 of 28613
Quote:
Originally Posted by clam85;13442116 
Thank you!!
I know what to do now!

lol....Floppy disks....

What PSU do you have? Also on the front page there are some hints on cable management
post #21014 of 28613
Quote:
Originally Posted by LostRib;13442144 
What PSU do you have? Also on the front page there are some hints on cable management

the CM GX 750w
post #21015 of 28613
Quote:
Originally Posted by LostRib;13442053 
Like you need help connecting everything?

PCI-E connector should go to your graphics card
And the SATA power should go to your HDD and DVD drive and then the SATA cable from the HDD and DVD drive to the mother board.
Uh idk what to do with the floppy connector unless you have a floppy drive

the SATA won't fit with my HDD.
post #21016 of 28613
Quote:
Originally Posted by clam85;13442514 
the SATA won't fit with my HDD.

Make sure they match up correctly, the connectors only work one way. The connections are L shaped

http://www.gamespot.com/forums/topic/26986920/picture-guide-to-computer-building-and-hardware-installation-56k?tag=topics%3Btitle

Read this. Should show you where everything goes
Edited by LostRib - 5/9/11 at 12:25pm
post #21017 of 28613
Quote:
Originally Posted by LostRib;13442673 
Make sure they match up correctly, the connectors only work one way. The connections are L shaped

http://www.gamespot.com/forums/topic/26986920/picture-guide-to-computer-building-and-hardware-installation-56k?tag=topics%3Btitle

Read this. Should show you where everything goes

Okay nvm, I just wasn't looking very good
God, I am herp-derping it up today sad-smiley-002.gif
post #21018 of 28613
1 more question for today; I've hooked up all three molex connectors that came with the psu, but there is still one female molex left. I have no clue what this one does, as it seems I've connected all 3 fans. It is located at the back of the case. I've included a pic.
post #21019 of 28613
Anyone knows if you can fit a E-ATX (ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Motherboard) in the scout?
post #21020 of 28613
Quote:
Originally Posted by QuickForceHD;13443067 
Anyone knows if you can fit a E-ATX (ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Motherboard) in the scout?

I have it too so yes you can.
It is a reaaally tight fit though. make sure that you put the side that is at the back of the case in first, otherwise it wont fit
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] The CoolerMaster Storm Scout, Scout II Club