Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] The CoolerMaster Storm Scout, Scout II Club
New Posts  All Forums:Forum Nav:

[Official] The CoolerMaster Storm Scout, Scout II Club - Page 2210

Poll Results: What is your Overall Opinion on this case

 
  • 49% (926)
    Great
  • 30% (573)
    Good
  • 12% (226)
    Meh
  • 1% (27)
    Bad
  • 5% (108)
    SUX
1860 Total Votes  
post #22091 of 28613
Quote:
Originally Posted by nicolasl46;13956365 
I have to figure out whats wrong with my set up.

What's your temps?
post #22092 of 28613
Quote:
Originally Posted by hxcnero;13958169 
I haven't posted here since i first got my scout.

here's and updated pic with my new innards(attached)

but before that here's when i first got my scout in january of 2010.

http://www.overclock.net/8162916-post4402.html

a year and a half and still going strong. biggrin.gif I <3 my scout

Lookin good!
post #22093 of 28613
Quote:
Originally Posted by nicolasl46;13956365 
I have to figure out whats wrong with my set up.

Try this, Make sure your H50 fan is plugged into the CPU FAN header and the pump is plugged into SYS FAN 1,2,3 or 4 depending on your board. go into your bios and run the CPU fan at @ least 62.5% and whatever header the pump is plugged into @ 75%.
    
CPUMotherboardGraphicsGraphics
Phenom II X4 B50 BE Callisto MSI MS-7577 790FX-GD70 XFX Radeon HD5870 XFX Radeon HD5870 
RAMHard DriveHard DriveOptical Drive
G-Skill DDR3-1600 Seagate Seagate Sony Optiarc 
CoolingCoolingOSMonitor
Corsair CWCH-50 AC Accelero Extreme 5870 W7HPX64 Acer 23" LED LCD Widescreen 
KeyboardPowerCaseMouse
Logitech G510 OCZ ZX 850w Modular Scout, of course R.A.T. 7  
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Phenom II X4 B50 BE Callisto MSI MS-7577 790FX-GD70 XFX Radeon HD5870 XFX Radeon HD5870 
RAMHard DriveHard DriveOptical Drive
G-Skill DDR3-1600 Seagate Seagate Sony Optiarc 
CoolingCoolingOSMonitor
Corsair CWCH-50 AC Accelero Extreme 5870 W7HPX64 Acer 23" LED LCD Widescreen 
KeyboardPowerCaseMouse
Logitech G510 OCZ ZX 850w Modular Scout, of course R.A.T. 7  
  hide details  
Reply
post #22094 of 28613
Quote:
Originally Posted by Darylrese;13955792 
can someone help me out...

I put a 120mm fan in the drive bay under my DVD-RW as an intake and screwed it to the metal blanking 5.25inch plates...when i put my hand over it at full speed (its a corsair H50 fan I took off the radiator) it seems to be shifting no air atall....How do you open up the airflow in this location? Did you cut out the grill or remove the dust filters on the blanking plate on the front panel?

I'm too scared to move my radiator....last time i did my h50 broke for some unknown reason! I tried mounting it in the front before and it didn't really seem any diff? mmm

With a H50 push / Pull exhaust ,using 2 x Scythe Gentle Typhoon AP-15's im getting 28degrees idle and 49 under load with a 1090T @ 4.1ghz

Usually the only difference you get by putting the Rad in the front is to give you more air flow for the rest of your build and it looks better..
Section 31
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3820 ASRock X79 Extreme 9 Sapphire 5770 X 2 In Crossfire 16GB Corsair Vengence 
Hard DriveHard DriveHard DriveHard Drive
Plextor SSD 128 GB 1 TB WD Black 1.5 tb WD Black  2 tb Seagate Green 
Hard DriveOptical DriveCoolingCooling
WD RAPTOR 300  Plextor PX850SA Corsair H-100 Water cooling on processor Factory Cooling for both 5770 Graphic Cards 
OSMonitorMonitorKeyboard
WINDOWS 7 Ultimate 64 ViewSonic VX2235wm Samsung 920 BW APC With Cherry Switches. 
PowerCaseMouseMouse Pad
Corair HX-1000 CM Storm Trooper Enigma Cobra Edition Microsoft SideWinder Gaming Mouse ASUS Black Leather 
Audio
Creative Core Recon 3Di 
  hide details  
Reply
Section 31
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3820 ASRock X79 Extreme 9 Sapphire 5770 X 2 In Crossfire 16GB Corsair Vengence 
Hard DriveHard DriveHard DriveHard Drive
Plextor SSD 128 GB 1 TB WD Black 1.5 tb WD Black  2 tb Seagate Green 
Hard DriveOptical DriveCoolingCooling
WD RAPTOR 300  Plextor PX850SA Corsair H-100 Water cooling on processor Factory Cooling for both 5770 Graphic Cards 
OSMonitorMonitorKeyboard
WINDOWS 7 Ultimate 64 ViewSonic VX2235wm Samsung 920 BW APC With Cherry Switches. 
PowerCaseMouseMouse Pad
Corair HX-1000 CM Storm Trooper Enigma Cobra Edition Microsoft SideWinder Gaming Mouse ASUS Black Leather 
Audio
Creative Core Recon 3Di 
  hide details  
Reply
post #22095 of 28613
Quote:
Originally Posted by Rockr69;13954200 
You've taken blue and created the best looking blue theme in a Scout I've ever seen.

I would have to agree with this statement.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Quote:
HxcHero
BTW. I think that this is one of the best looking Motherboards. I love the covered Mobo.

216374d1308708906-official-coolermaster-storm-scout-club-100_3703.jpg
Edited by unimatrixzero - 6/22/11 at 8:46am
Section 31
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3820 ASRock X79 Extreme 9 Sapphire 5770 X 2 In Crossfire 16GB Corsair Vengence 
Hard DriveHard DriveHard DriveHard Drive
Plextor SSD 128 GB 1 TB WD Black 1.5 tb WD Black  2 tb Seagate Green 
Hard DriveOptical DriveCoolingCooling
WD RAPTOR 300  Plextor PX850SA Corsair H-100 Water cooling on processor Factory Cooling for both 5770 Graphic Cards 
OSMonitorMonitorKeyboard
WINDOWS 7 Ultimate 64 ViewSonic VX2235wm Samsung 920 BW APC With Cherry Switches. 
PowerCaseMouseMouse Pad
Corair HX-1000 CM Storm Trooper Enigma Cobra Edition Microsoft SideWinder Gaming Mouse ASUS Black Leather 
Audio
Creative Core Recon 3Di 
  hide details  
Reply
Section 31
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3820 ASRock X79 Extreme 9 Sapphire 5770 X 2 In Crossfire 16GB Corsair Vengence 
Hard DriveHard DriveHard DriveHard Drive
Plextor SSD 128 GB 1 TB WD Black 1.5 tb WD Black  2 tb Seagate Green 
Hard DriveOptical DriveCoolingCooling
WD RAPTOR 300  Plextor PX850SA Corsair H-100 Water cooling on processor Factory Cooling for both 5770 Graphic Cards 
OSMonitorMonitorKeyboard
WINDOWS 7 Ultimate 64 ViewSonic VX2235wm Samsung 920 BW APC With Cherry Switches. 
PowerCaseMouseMouse Pad
Corair HX-1000 CM Storm Trooper Enigma Cobra Edition Microsoft SideWinder Gaming Mouse ASUS Black Leather 
Audio
Creative Core Recon 3Di 
  hide details  
Reply
post #22096 of 28613
Quote:
Originally Posted by Rockr69;13963032 
Try this, Make sure your H50 fan is plugged into the CPU FAN header and the pump is plugged into SYS FAN 1,2,3 or 4 depending on your board. go into your bios and run the CPU fan at @ least 62.5% and whatever header the pump is plugged into @ 75%.

Incorrect. Plug pump into PWR fan and run at full speed. you want the pump running at 1400rpm,no less,the PWR header runs 100% regardless so you can keep your system fans variable if wished.
45c on idle=badly seated HSF/pump
Edited by B NEGATIVE - 6/22/11 at 9:09am
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #22097 of 28613
Quote:
Originally Posted by B NEGATIVE;13963991 
Incorrect. Plug pump into PWR fan and run at full speed.
45c on idle=badly seated HSF/pump

I agree on badly seated HS/Pump, however I've found with my H50 (proud owner for over a year now) that with a single fan the coolant moves through the rad too fast to be fully cooled. It works for me and my not work for others. This is why I said to "try it".

The truth is, while the H series Cosair all in ones are, IMO, the best "stock"cooling solution for the Scout given price and board footprint, they will start to falter on heavy sustained overclocks. There just isn't enough coolant volume in the system to deal residual heat buildup.
    
CPUMotherboardGraphicsGraphics
Phenom II X4 B50 BE Callisto MSI MS-7577 790FX-GD70 XFX Radeon HD5870 XFX Radeon HD5870 
RAMHard DriveHard DriveOptical Drive
G-Skill DDR3-1600 Seagate Seagate Sony Optiarc 
CoolingCoolingOSMonitor
Corsair CWCH-50 AC Accelero Extreme 5870 W7HPX64 Acer 23" LED LCD Widescreen 
KeyboardPowerCaseMouse
Logitech G510 OCZ ZX 850w Modular Scout, of course R.A.T. 7  
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Phenom II X4 B50 BE Callisto MSI MS-7577 790FX-GD70 XFX Radeon HD5870 XFX Radeon HD5870 
RAMHard DriveHard DriveOptical Drive
G-Skill DDR3-1600 Seagate Seagate Sony Optiarc 
CoolingCoolingOSMonitor
Corsair CWCH-50 AC Accelero Extreme 5870 W7HPX64 Acer 23" LED LCD Widescreen 
KeyboardPowerCaseMouse
Logitech G510 OCZ ZX 850w Modular Scout, of course R.A.T. 7  
  hide details  
Reply
post #22098 of 28613
Quote:
Originally Posted by Rockr69;13964120 
I agree on badly seated HS/Pump, however I've found with my H50 (proud owner for over a year now) that with a single fan the coolant moves through the rad too fast to be fully cooled. It works for me and my not work for others. This is why I said to "try it".

The truth is, while the H series Cosair all in ones are, IMO, the best "stock"cooling solution for the Scout given price and board footprint, they will start to falter on heavy sustained overclocks. There just isn't enough coolant volume in the system to deal residual heat buildup.

Ah,your going slowcoach...pump any quieter?

The H50 does suffer from heatsoak,i run 3000 rpm fans to counter this.
Its that crap alu rad thats messes everything up,tight airflow thru it too
Edited by B NEGATIVE - 6/22/11 at 9:18am
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #22099 of 28613
Ambient temp 30c, as I'm writing my temp is 44c and the pump is plugged into the cpu header and fluctuating between 1318-1360rpms. The pump is sitting really tight on the cpu, unless is too tight? Gonna try connecting the fan to CHA_FAN1 header and see what happens.
post #22100 of 28613
Quote:
Originally Posted by nicolasl46;13964269 
Ambient temp 30c, as I'm writing my temp is 44c and the pump is plugged into the cpu header and fluctuating between 1318-1360rpms. The pump is sitting really tight on the cpu, unless is too tight? Gonna try connecting the fan to CHA_FAN1 header and see what happens.

Did you move the Pumphead once it touched your CPU? Did you lift it in any way?
If it did then remove it and reapply TIM after cleaning the old TIM off with Articlean.

You should idle about 3-5c over ambient
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] The CoolerMaster Storm Scout, Scout II Club