Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] The CoolerMaster Storm Scout, Scout II Club
New Posts  All Forums:Forum Nav:

[Official] The CoolerMaster Storm Scout, Scout II Club - Page 2239

Poll Results: What is your Overall Opinion on this case

 
  • 49% (926)
    Great
  • 30% (573)
    Good
  • 12% (226)
    Meh
  • 1% (27)
    Bad
  • 5% (108)
    SUX
1860 Total Votes  
post #22381 of 28613
I have heard of Brasso before, its in a shiny tin...sure we have it here in the UK! Are you making a flush side panel (no fans)? My challenge is going to be cutting out the 200mm hole..I just hope it fits width wise and the hole we cut is round and not wobbly! Going to do it on a jig i believe

Mounting the side panel...They have some black 3mm grub screws with allen key heads we are going to use to fit it back on all being well...They cut the plastic rivets off to remove the standard side panel so i can't reuse those!

All i'm going to do is place the standard window onto a sheet of Acrylic, draw around it, drill a hole and cut the 20mm fan hole out then cut the shape out. Finally drill all the holes and fit back onto the side panel. Fingers acrossed it will be a decent job..It really bugs me when you know something is bodged

I'll post pictures tomorrow if we manage to get it done
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
post #22382 of 28613
Yes, mine will be flush. We stay on a (very dusty) farm so the side vents attract a lot of dust and fluff. And I don't need fans on the sides thankfully

I am not sure how brittle acrylic is but perspex cracks very easily so going slow with the jigsaw is reccommended (a variable-speed unit is your best bet). Also, the heat can warp and discolour it so take it slow and steady. As for the hole, have you decided on a method or is the shop going to do it for you?

Pity about them cutting the rivets off - it took me 3 minutes to remove all mine with a slot screwdriver. Tell them you want replacements!

I am also a bit shakey when it comes to drilling the holes, but I have made a headlight cover for my KLR650 out of it once and it was easy enough Good luck!
post #22383 of 28613
I work in a school so our tech department are doing it for me with my help using propper machinery so it should come out really well.

I haven't heard what the plan is for the hole...i asked and got told 'stop worrying about it, we will sort it' from the techys so they obviously have ideas up their sleeves. I know they definatly don't have a 200mm hole saw though. Probably drill a hole then use the jig and cut it out.

Yep shame about the rivets but they are giving me the grub screws for free so i don't really care Aslong as they look decent!
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
post #22384 of 28613
Ah that's at least a decent bonus. I'm going to do everything myself, but the downside of that is I have no one to blame but myself! I work for an IT company, and the tools here are quite, uhm...limited. So I would rather tackle it at home where I have the time and tools to do it properly.

What fan arrangement do you have on your case?
post #22385 of 28613
Quote:
Originally Posted by Darylrese View Post
I work in a school so our tech department are doing it for me with my help using propper machinery so it should come out really well.

I haven't heard what the plan is for the hole...i asked and got told 'stop worrying about it, we will sort it' from the techys so they obviously have ideas up their sleeves. I know they definatly don't have a 200mm hole saw though. Probably drill a hole then use the jig and cut it out.

Yep shame about the rivets but they are giving me the grub screws for free so i don't really care Aslong as they look decent!
Jigsaw then hit it with a dremel drum sander on the cut face. Job done.
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #22386 of 28613
Quote:
Originally Posted by Wabbit16 View Post
Ditto! We here in the good old Banana Republic have a product called Brasso that you can use to polish out scratches on CD's, acrylic or anything for that matter. I believe it is also found in the UK, but perhaps under a different name?

I think the clear was a good idea - you can always tint it if you want it a shade darker . The piece of perspex I found is pretty scratched up, but I'm going to pick up some fine sandpaper and invest some of my elbow grease into it and buff everything out. I hope the 6mm perspex won't meet up with my Hyper 212+, but I think the clearance should be allright.

How do you plan on mounting your acrylic to the side panel?

I'm gonna try and see if I can create the side window in Google Sketch-Up 8...wish me luck!
Brasso is very abrasive,dont use on plastics as it will dull them.
use standard pledge or whatever,far better!
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #22387 of 28613
I'm not so good at DIY so glad i have some experienced tech's on hand. I'm a IT Technician in the school but we dont have any tools really, just screw drivers and anti static equipment!

I have the following setup in my case at the moment:

1 x Standard Scout intake fan at front
1 x Corsair intake fan in drive bays
1 x Standard Scout exhaust fan on top
2 x Gentle Typhoon AP-15's Push / Pull EXHAUST on H50 Radiator on rear of case

And obviously adding in the 200mm in my side window tomorrow. Its going to be as cool as a fridge! I just hope the hot air inside can escape through the top exhaust and push pull with all the fresh air being pushed in with that 200mm ontop of everything else! Should be fine
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
post #22388 of 28613
Quote:
Originally Posted by B NEGATIVE View Post
Jigsaw then hit it with a dremel drum sander on the cut face. Job done.
Yep expect thats what we will do! Thanks for the advice...spot on
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
Intel Gaming PC
(17 items)
 
Playstation 4
(0 items)
 
CPUMotherboardGraphicsRAM
Intel i7 5930k @ 4.5ghz, 1.2v MSI X99A GodLike Gaming Carbon EVGA GTX 980 SC SLI Corsair Dominator Platinum 16GB DDR4 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung EVO 840 250GB SSD, Seagate Barracuda 3T... Full custom watercooling loop Windows 10 Pro 64bit Acer XB271HU  
KeyboardPowerCaseMouse
Razer Blackwidow Chroma TE Corsair HX1050 Professional Series Corsair 760T White Roccat Kone XTD 
Mouse PadAudioAudioOther
Roccat Alumic Asus D2X Sound Card Bose Companion 5 Speakers NZXT Hue+ RGB Lighting  
Other
Logitech G25 Steering Wheel 
  hide details  
Reply
post #22389 of 28613
Quote:
Originally Posted by B NEGATIVE View Post
Brasso is very abrasive,dont use on plastics as it will dull them.
use standard pledge or whatever,far better!
When I used Brasso on my perspex headlight covers they didn't dull, but they did require a LOT of elbow grease. It did eventually come right...here are some pics from the forum I posted it to:

Raw material:




After sanding, before Brasso:


After Brasso:




NOTE: I used an alternative to Brasso called Brillo. There might be some differences between the two but I believe both are abrasives in any case
post #22390 of 28613
Quote:
Originally Posted by Wabbit16 View Post
When I used Brasso on my perspex headlight covers they didn't dull, but they did require a LOT of elbow grease. It did eventually come right...here are some pics from the forum I posted it to:

NOTE: I used an alternative to Brasso called Brillo. There might be some differences between the two but I believe both are abrasives in any case
Holey Moley, Brillo? The soap that's used in the extremely abrasive soap-filled wirey scrubbing pads, usually used for cleaning greasy oven dishes etc.?

Wow man, that's mad. I've also used Brasso on plasticy things when I was a kid, it dulled the colour outta them. Saying that, Perspex is a single layer of the same substance, but I woud've expected some dulling.

A better option would've been a buffing tool for a Drill or a Dremel, even the finest Glasspaper would surely leave it dulled compared to it's original state?
 
Exia R2
(22 items)
 
Unicorn SD
(13 items)
 
CPUMotherboardGraphicsRAM
l Intel® Core™ i7-5820K l l MSI X99A SLI Krait Edition l l MSI GTX 980Ti Gaming 6G l l Corsair Dominator® Platinum (4x4GB) DDR4 3Ghz l 
Hard DriveHard DriveHard DriveHard Drive
| Samsung PM951 M.2 PCI-e NVMe 512GB | l Samsung 840 Evo 500GB l l Toshiba X300 4TB 128MB Cache l l Toshiba MD04ACA400 4TB l 
Hard DriveHard DriveOptical DriveCooling
l Toshiba DT01ACA300 3TB (x3) l l Samsung F3 1TB l l Pioneer BDR-209EBK l l NZXT Kraken X61 (2x Noctua NF-A14-2000-IP67) l 
CoolingOSMonitorMonitor
l Phobya MaxGuide 6 Controller l l Windows 7 x64 Customised. l l Acer Predator XB240H 144Hz G-Sync l l LG M2380D 1080p l  
KeyboardPowerCaseMouse
l Logitech G19s l  l EVGA SuperNOVA G2 850w l l CM Storm Stryker™ l  l Logitech G502 l  
Mouse PadAudioAudioAudio
l Razer Vespula l l Logitech Z506 5.1 l l Steelseries Siberia V2 MSI Gaming Edition l l Creative Fatal1ty HS-800 V2 l 
CPUMotherboardGraphicsRAM
l Phenom II x4 960T BE (@x6 3838MHz) l l Asus Crosshair IV Formula l  l MSI GTX 570 PE/OC l l 8GB Crucial Ballistix Tactical 1600MHz (@170... 
Hard DriveHard DriveHard DriveHard Drive
l Samsung 840 Evo 500GB l l Samsung F3 1TB X2 l l Maxtor DiamondMax 750GB 32MB l l Samsung F4 2TB l 
Hard DriveOptical DriveCoolingCooling
l Toshiba DT01ACA300 x2 l l Pioneer BDR-209EBK l l Scythe Kama Angle Rev.B (With Scythe GT 1850R... l 4x120mm, 2x140mm Case Fans (CM + Scythe) l 
CoolingOSMonitorKeyboard
l Aerocool Cooltouch R l l Windows 7 x64 nVidia Ed. l l LG M2380D 1080p l l Logitech G15 l 
PowerCaseMouseMouse Pad
l XFX Pro 650W Core Ed. l l CM Storm Scout™ l l Logitech G502 l l Steelseries QcK l 
AudioAudio
l Creative Fatal1ty HS-800 V2 l l Logitech LS21 l 
CPUMotherboardGraphicsRAM
G3258 @4Ghz MSI Z97I Gaming AC MSI GTX 460 Crucial Ballistix Sport 1600MHz 8GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Evo 128GB Toshiba DT01ACA100 1TB Optiarc 7170S Corsair H60 
OSKeyboardPowerCase
Windows 7 x64 Logitech K400 Wireless Touch Cooler Master Silent Pro M2 520w Modular Cooler Master Elite 130 
Mouse
Logitech M187 
  hide details  
Reply
 
Exia R2
(22 items)
 
Unicorn SD
(13 items)
 
CPUMotherboardGraphicsRAM
l Intel® Core™ i7-5820K l l MSI X99A SLI Krait Edition l l MSI GTX 980Ti Gaming 6G l l Corsair Dominator® Platinum (4x4GB) DDR4 3Ghz l 
Hard DriveHard DriveHard DriveHard Drive
| Samsung PM951 M.2 PCI-e NVMe 512GB | l Samsung 840 Evo 500GB l l Toshiba X300 4TB 128MB Cache l l Toshiba MD04ACA400 4TB l 
Hard DriveHard DriveOptical DriveCooling
l Toshiba DT01ACA300 3TB (x3) l l Samsung F3 1TB l l Pioneer BDR-209EBK l l NZXT Kraken X61 (2x Noctua NF-A14-2000-IP67) l 
CoolingOSMonitorMonitor
l Phobya MaxGuide 6 Controller l l Windows 7 x64 Customised. l l Acer Predator XB240H 144Hz G-Sync l l LG M2380D 1080p l  
KeyboardPowerCaseMouse
l Logitech G19s l  l EVGA SuperNOVA G2 850w l l CM Storm Stryker™ l  l Logitech G502 l  
Mouse PadAudioAudioAudio
l Razer Vespula l l Logitech Z506 5.1 l l Steelseries Siberia V2 MSI Gaming Edition l l Creative Fatal1ty HS-800 V2 l 
CPUMotherboardGraphicsRAM
l Phenom II x4 960T BE (@x6 3838MHz) l l Asus Crosshair IV Formula l  l MSI GTX 570 PE/OC l l 8GB Crucial Ballistix Tactical 1600MHz (@170... 
Hard DriveHard DriveHard DriveHard Drive
l Samsung 840 Evo 500GB l l Samsung F3 1TB X2 l l Maxtor DiamondMax 750GB 32MB l l Samsung F4 2TB l 
Hard DriveOptical DriveCoolingCooling
l Toshiba DT01ACA300 x2 l l Pioneer BDR-209EBK l l Scythe Kama Angle Rev.B (With Scythe GT 1850R... l 4x120mm, 2x140mm Case Fans (CM + Scythe) l 
CoolingOSMonitorKeyboard
l Aerocool Cooltouch R l l Windows 7 x64 nVidia Ed. l l LG M2380D 1080p l l Logitech G15 l 
PowerCaseMouseMouse Pad
l XFX Pro 650W Core Ed. l l CM Storm Scout™ l l Logitech G502 l l Steelseries QcK l 
AudioAudio
l Creative Fatal1ty HS-800 V2 l l Logitech LS21 l 
CPUMotherboardGraphicsRAM
G3258 @4Ghz MSI Z97I Gaming AC MSI GTX 460 Crucial Ballistix Sport 1600MHz 8GB 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Evo 128GB Toshiba DT01ACA100 1TB Optiarc 7170S Corsair H60 
OSKeyboardPowerCase
Windows 7 x64 Logitech K400 Wireless Touch Cooler Master Silent Pro M2 520w Modular Cooler Master Elite 130 
Mouse
Logitech M187 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] The CoolerMaster Storm Scout, Scout II Club