Right Im Back
I have finished some diagrams using ye old ms paint
(dont laugh at my weak skills with paint)
as you can see I have simply moved the red wire on the female molex plug to the yellow 12v side of the plug. I recommend you use a paper clip and simply pull out the pins from the plug and change its location to this image, it would look much neater and will also guarantee a solid connection with no risk of shorting out....google "how to sleeve cables" and there will be videos on how to remove pins if you are not sure.
Now if you want to run a 12v lighting circuit whilst maintaining the 5v circuit you will need to invest in a solid state relay. This device will allow the 5v circuit to switch on the 12v circuit whilst keeping the two circuits separate and as it is placed on the output of cm storm scout lighting switch it can all be controlled by the press of the magic button.
I have also done a simple circuit to show how you would typically connect this to the current system.
you would also need to purchase a couple of extra resistors to help prevent and L.E.D's from blowing.
I hope that clears the confusion and let me know if my diagrams are wrong/don't make sense.Edited by darkstar585 - 9/9/11 at 3:45am