I took the CCL lights out by the way. Every now and then I would switch them on and the PC would freeze up and the speakers make a hissing noise, Think it is the inverter did not want risk leaving them in there now I got my new GPU.
The problem is that you have that tube in a really bad space. In essence cold Cathodes are really small flouresent bulbs. Florescent bulbs play havoc with radio signals and E-M Current. The spot where you have it allows that Electromagnetic interference to get close to your power feeds to your Video card and your Main power feed to your Motherboard could be effected by this interference and a E-M burst my be influencing your clean power going into the unit.
. Move the Tube to the back of the case in the corner of the case closest to the back fan side panel. And install there. The E-M interference will not travel that far and the problem should be solved.
. Also you may want to change the molex plug that feeds your light to another rail. If you have a multi rail PSU.Edited by Enigma8750 - 12/8/09 at 10:35am