Originally Posted by Enigma8750
Bri.. We are having the same problem.. every time I boot up I have to go into the bios and set the Boot order.
Windows had an update on 7 64 last week.. the problem has been for a week. This is some Weird shxx..
Yeah, I really don't like the one major thing they changed. You used to be able to go into.....
Hey wait, you still can, it's just not as obvious as it used to be. Go Start>Control Panel>click on Programs & Features>you'll get a window>then click View Installed Updates>then scroll down untill you get a header of Microsoft Windows>then the two that installed on 4/27 are probably the offenders, you can't shift click so select each one then at the top click Uninstall an Update.
Make sure you turn off automatic updating first or they'll just re-install.
Now then, why didn't you have this Case Modding 101 thing before
I started on the water re-config? I have this battery powered drill & to mount the pump I needed two hole in the back of the case. I spent over an hour and a half trying to drill 2 holes!! The batteries died, I got out the "plug in drill" and I was done in 3 minutes!
ARGGGGGHHHHH!! I could have had half this loop done by now. Oh well, that's life, I heard this voice in my head of my friend saying "that drill has no torque" and realized I need the corded one. I'll get it all drained, tubed & re-connected tomorrow. I needed time for the glue to dry on the reservoir LED's anyway. There's always something that comes wrong anyway, like the LED holders, the O-rings were the wrong size and warped out when I tightened them.
I would volunteer Mindy to read your book but she's heavily involved in a Dragon series right now.