~: [Official] 4GHz Overclock Club :~ - Page 730

Originally Posted by Darth Oscar 

Oh I am so in. It used my PC name as mine name I hope that is ok.
http://valid.canardpc.com/show_oc.php?id=2354674

Originally Posted by alancsalt 

Between validate and submit you are meant to replace your computer name with your OCN user name.

Originally Posted by Mike-IRL 

Based on your posts in the p5Q thread you've tried going for higher FSB on a lower multi but it couldn't do it, TIM probably won't help you hit above 333MHz FSB if you can get 4GHz out of your chip at a higher multiplier since if it's stable at 4GHz temperatures shouldn't be enough of a problem at 3.5 to have an impact on stability.
As far as RAM goes, just run on the 333 strap at 1:1 and you've got headroom up to 400MHz before RAM becomes an issue. I think the 400 strap is buggy or something but I could be thinking of the 400 strap on the p5E, I stay away from it anyway as the 333 strap works well for me.
Your problem probably comes down to your CPU as 800MHz RAM should be good for 400MHz FSB at least and your board should be fine with running a dual core at 400MHz.
It's not exactly the same but I'm pretty sure I ran my Q6600 at 400FSB with every voltage setting but Vcore at one notch above the minimum so I am pretty certain it's not your board.
Oh and just to let you know, the p5Q deluxe overvolts by a large amount when set to the minimum settings or to auto, setting one notch higher lowers the voltage considerably.
I set my voltages one notch up because the p5Q-E and deluxe are similar and might share that problem.
It's worth doing just in case because the voltages tested are worryingly high. I think it might have been fixed with a newer bios though.

To have at least some on-topic content in my post, if the list gets updated again I'd like to join with the validation in my sig. 4320.05MHz with a Q6600.