Overclock.net › Forums › AMD › AMD Motherboards › [Official] MSI 790FX-GD70 Owners Club
New Posts  All Forums:Forum Nav:

[Official] MSI 790FX-GD70 Owners Club - Page 663

post #6621 of 9641
Quote:
Originally Posted by TJ241 View Post
I have a C3 955. I eventually want to OC the thing, but right now I just need a stable system lol. I figure I can go through the OC'ing thing with a buddy of mine once the system has stopped with it's constant Hypertransport sync flood errors =D.
Alrighty, so for a stock everything I use these settings:

Cell Menu:

AMD CnQ: Disabled (this can be enabled, but you will need to set your power options in Windows to Power-Saving, in order to activate CnQ)
CPU FSB: 200
CPU Ratio: 16x
CPU Freq: 3200mhz
CPU-NB Ratio/Freq: 10x/2000mhz (if you have your RAM OCed to 1600, I recommend a minimum of 12x/2400mhz)
Unlock CPU Core/ACC/Auto OC Tech/Multistep OC/OC Dial Func: All Disabled
CPU Core Control: Auto (Unless you wanna turn off cores)
HT Link Speed: 2000mhz (10x Ratio)
PCI-E Freq: Leave at 100mhz

CPU VDD: 1.2375v
CPU-NB VDD: Auto or you can go a click or two higher
CPU Voltage: 1.257v
CPU-NB Voltage: Auto or you can go a click or two higher as well
CPU PLL Voltage: Auto or up to 2.55v
CPU DDR-PHY Voltage: Auto or increase a few clicks if you think your RAM needs more juice
DRAM: Voltage: Run rated voltage
DDR Vref Voltage: Auto
NB Voltage: Anywhere from 1.15-1.2v
NB PCI-E Voltage: 1.25V-1.3V (this is required for Crossfired GPUs, single cards can be set 1.15-1.2V)
NB-PCI-E I/O Voltage: 1.82v
HT Link Voltage: Auto
SB Voltage: Auto
Spread Sprectrum: Disabled

I'm not sure which model of RAM you might have, but if this is your RAM:

http://www.newegg.com/Product/Produc...82E16820231276

I would suggest you go to Advance DRAM settings change the DRAM Timing Mode to [Both] and make your timings:

CAS Latency (CL): 7*
tRCD: 7*
tRP:7*
tRAS: 21*
tRC:28*

*Make sure you do all 5 for the second set of timings as well

RAM Timing: 1T (this is towards the bottom of the page)
Bank Interleaving: Disabled

These settings are for absolutely stock everything, aside from RAM. You should find more stable usage from these settings and see no more of those Transport Flood Sync errors. Hope everything goes well and if you need more help just come back.
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply

Gear mentioned in this thread:

post #6622 of 9641
Hi, I would like to overclock my new system...

I have a AMD Phenom II X4 965 C3 on MSI 790FX-GD70 and I would like to set my RAM at 1600 Mhz (Corsair Dominator 1600 Mhz (2x2GB) CL8)

All stock cooling...
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
post #6623 of 9641
Quote:
Originally Posted by rzr92 View Post
Hi, I would like to overclock my new system...

I have a AMD Phenom II X4 965 C3 on MSI 790FX-GD70 and I would like to set my RAM at 1600 Mhz (Corsair Dominator 1600 Mhz (2x2GB) CL8)

All stock cooling...
Almost have the same system.Get yourself an aftermarket cooler before you really OC the phenom. Once you do that 20x200 vcore @ 1.41-1.47. Put the NB at 2600 or 2800 @ 1.3x volts, boom done.
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
post #6624 of 9641
Hey people i need help overclocking i have had the phenom 965 for a while now and can not get it stable at 4ghz no matter even if i give it 1.52 volts same prob with NB its almost imposable to get it at 2600mhz even if i put the NB and cpu-nb at 1.45 volts Max temp nb gets is 65c so i dont think temps are the prob also i have bios 1.9 motherboard is msi 790fx-gd70 any help would be greatly appreciated.
post #6625 of 9641
Quote:
Originally Posted by mastical View Post
Almost have the same system.Get yourself an aftermarket cooler before you really OC the phenom. Once you do that 20x200 vcore @ 1.41-1.47. Put the NB at 2600 or 2800 @ 1.3x volts, boom done.
Yeah, but I wanna set my RAM at 1600MHZ... I tryed to set my timing to 8-8-8-24 2T @ 1.65v, but when I start the Prime95 test it show me an error....

Model of my RAM : CMD4GX3M2B1600C8
BIOS Version : 1.B0 (the latest)

And I have a big big question : When we say "Set your vcore at 1.4375" for exemple, I set the CPU VDD Voltage or CPU Voltage ? / "Set your CPU-NB Voltage at 1.30x", I will set my CPU-NB VDD Voltage ?
Edited by rzr92 - 5/7/10 at 8:36pm
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
post #6626 of 9641
Thread Starter 
Quote:
Originally Posted by rzr92 View Post
Yeah, but I wanna set my RAM at 1600MHZ... I tryed to set my timing to 8-8-8-24 2T @ 1.65v, but when I start the Prime95 test it show me an error....

Model of my RAM : CMD4GX3M2B1600C8
BIOS Version : 1.B0 (the latest)

And I have a big big question : When we say "Set your vcore at 1.4375" for exemple, I set the CPU VCC Voltage or CPU Voltage ? / "Set your CPU-NB Voltage at 1.30x", I will set my CPU-NB VCC Voltage ?
dont use the VCC voltages as they are actually VID (much less refined)
Black beauty
(15 items)
 
  
CPUMotherboardGraphicsRAM
5820k asus x99-a Gtx 770 G.skill ripjaws 4 
Hard DriveHard DriveHard DriveCooling
samsung 840 evo  WD black WD black Custom water 320 rad 
OSMonitorKeyboardPower
Windows 7 Asus 21.5 led x3 Logitech g110 Corsair 850TX 
CaseMouseMouse Pad
technofront HWD Steelseries Xai WOWPAD 
  hide details  
Reply
Black beauty
(15 items)
 
  
CPUMotherboardGraphicsRAM
5820k asus x99-a Gtx 770 G.skill ripjaws 4 
Hard DriveHard DriveHard DriveCooling
samsung 840 evo  WD black WD black Custom water 320 rad 
OSMonitorKeyboardPower
Windows 7 Asus 21.5 led x3 Logitech g110 Corsair 850TX 
CaseMouseMouse Pad
technofront HWD Steelseries Xai WOWPAD 
  hide details  
Reply
post #6627 of 9641
Quote:
Originally Posted by eclipseaudio4 View Post
dont use the VCC voltages as they are actually VID (much less refined)
??? You don't answer.. I can only change the CPU VDD Voltage/CPU-NB VDD Voltage and CPU/CPU-NB Voltage.. And my question was "Whitch setting I change when someone say to me change your vcore to 1.435 and your cpu-nb to 1.30x"
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
post #6628 of 9641
Thread Starter 
Quote:
Originally Posted by rzr92 View Post
??? You don't answer.. I can only change the CPU VDD Voltage/CPU-NB VDD Voltage and CPU/CPU-NB Voltage.. And my question was "Whitch setting I change when someone say to me change your vcore to 1.435 and your cpu-nb to 1.30x"
whay can you only change the VDD voltages?

for vcore you change CPU-Voltage and for CPU-NB you change the CPU-NB-Voltage.
Black beauty
(15 items)
 
  
CPUMotherboardGraphicsRAM
5820k asus x99-a Gtx 770 G.skill ripjaws 4 
Hard DriveHard DriveHard DriveCooling
samsung 840 evo  WD black WD black Custom water 320 rad 
OSMonitorKeyboardPower
Windows 7 Asus 21.5 led x3 Logitech g110 Corsair 850TX 
CaseMouseMouse Pad
technofront HWD Steelseries Xai WOWPAD 
  hide details  
Reply
Black beauty
(15 items)
 
  
CPUMotherboardGraphicsRAM
5820k asus x99-a Gtx 770 G.skill ripjaws 4 
Hard DriveHard DriveHard DriveCooling
samsung 840 evo  WD black WD black Custom water 320 rad 
OSMonitorKeyboardPower
Windows 7 Asus 21.5 led x3 Logitech g110 Corsair 850TX 
CaseMouseMouse Pad
technofront HWD Steelseries Xai WOWPAD 
  hide details  
Reply
post #6629 of 9641
Guys my post is up there can you help any.
post #6630 of 9641
Quote:
Originally Posted by eclipseaudio4 View Post
whay can you only change the VDD voltages?

for vcore you change CPU-Voltage and for CPU-NB you change the CPU-NB-Voltage.
I knew that.. but when I will use VDD Voltage ?
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
RZR92
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 C3 - 3.80 Ghz @ 1.42v MSI 790FX-GD70 ASUS ATI Radeon 5850 - 4600 Mhz @ 1.3v Corsair Dominator 4 GB DDR3 1600 Mhz CL8 
Hard DriveOSKeyboardPower
1 TB (7200 R/M) (W.D. Black Edition) Windows 7 x64 - Ultimate Edition Logitech G110 Antec TP 850w 
CaseMouse
NZXT Tempest Logitech SetPoint II G9 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › AMD › AMD Motherboards › [Official] MSI 790FX-GD70 Owners Club