Overclock.net › Forums › AMD › AMD Motherboards › [Official] MSI 790FX-GD70 Owners Club
New Posts  All Forums:Forum Nav:

[Official] MSI 790FX-GD70 Owners Club - Page 666

post #6651 of 9641
Trying to OC my 1055T, the problem I'm facing is that if I go above 260 FSB at all, I will get a Hyper Transport Flood Sync Error. I have then tried to put my HT link at x5, x6, x7, x8, x9 since if I leave it at auto it will be x10 with no luck.

Any thoughts on what's going on and how to get passed it? I know this chip can do more then 3.64GHz @ 1.39v

Found this old post about this error and going to repost it and respond to each point as I'm trying to figure this out...

Quote:
Originally Posted by Mastiffman View Post
Nice Guide MDUCLOW!!!!

Nice overclock Ricky! Looks good!

AND FINALLY!!!!!!!

Found out exactly WHAT causes the Hypertransport Sync Flood Error!!!!

It's the CPU itself. Which I guess makes complete Sense being that the HT is ON the Darn thing!

Anyway, Scenarios that Can produce the HT Sync Flood Error.

1. To high of an OC without the ample amount of CPU volts.
2. Plain, not enough CPU Volts at any speed.
3. Possible Bad power supply.
4. Motherboard with very high amount of VDroop which ultimately leads back to "Not Enough CPU Volts". This will reveal itself with a load on the CPU. Maybe not during typical use. Could just be that the motherboard has CPU power providing issues as well (Good power from PSU but motherboard wastes the power before reaching the CPU).


Hope that this helps someone out!
1. 260 FSB @ 1.39v = Completely stable, 261 FSB @ 1.5v = HT Sync Flood Error upon stability testing
2. This mean I'm stuck at 3.6GHz?
3. Could be possible, haven't ran into any other issues even when I was using a 4870x2 + GTS 250 OC cards
4. How can I determine if this is the case?
Edited by Aqualoon - 5/10/10 at 7:06am
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply

Gear mentioned in this thread:

post #6652 of 9641
Try taking out 4GB of ram then overclocking.
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 RX Vega 56 G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 RX Vega 56 G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
post #6653 of 9641
Quote:
Originally Posted by CryWin View Post
Try taking out 4GB of ram then overclocking.
And then what when/if I get a stable OC above 260FSB? Hope I can toss my other 4GB back into my system and everything will be stable?
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply
post #6654 of 9641
Quote:
Originally Posted by Aqualoon View Post
And then what when/if I get a stable OC above 260FSB? Hope I can toss my other 4GB back into my system and everything will be stable?
I'm not sure.. you should be able to get higher than 260fsb.. have you tried lowering the Multi to see if it can run higher at all?

Also, you could try bumping it up to 275fsb or something; to see if there is a fsb hole.
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 RX Vega 56 G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 RX Vega 56 G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
post #6655 of 9641
Yeah, it's stuck at that 260 FSB marker. I can go higher, load into windows just fine but can't pass any type of stability testing.
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply
post #6656 of 9641
Does anyone in here run a Nvidia GPU for primary display and a Nvidia GPU for PhysX on this board? I am getting such a headache trying to figure out what is going on...I have a GTX480 and 9800GTX+ for PhysX and every time I install the 9800 I get worse FPS in my games and when I uninstall the 9800 everything goes back to normal...If it matters I have the 480 in slot1 and the 9800 in slot3...Is this the correct way to do this or should I install the 9800 in slot2? Also is there a right and wrong way to go about installing the 9800 driver wise?

I have tried:
Installing the 480 in slot1, installed recent drivers restarted, loaded Windows then shut down.
Installed the 9800 in slot3, Windows picked the driver for it then I manually restarted. Since Windows installs its own driver could this be causing an issue? After the 9800 gets installed by Windows I have to setup my main GPU again through the NCP.

Should I try to install the 9800 as the main GPU first in slot3 with my monitor connected to it so I can install the most recent driver for it instead of allowing Windows update to do it automatically?

Just to give you an idea in Metro 2033 ,which is a PhysX game, I get around 70-100FPS with my 480 in DX11 with all settings on low.

Now when I install my 9800 for PhysX I get around 20-40FPS depends on the part of the game with same exact settings and my GPU2 is only being used about 20%...

I know something is wrong but can't figure it out. So if anyone has this kind of setup please tell me how you did it. I know this is a crossFire board and maybe it's causing issues with the GPU's being in the 2X16 slots...

Thanks
    
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T@ 4.0Ghz 1.465v MSI 790FX-GD70 Palit GTX480 OCZ AMD BE 1600Mhz 4GB 
Hard DriveOptical DriveOSMonitor
Corsair 32GB SSD/WD Blue 500GB/ 1TB External SAMSUNG Black Blu-ray Combo Drive Windows 7 Ultimate 64bit Mitsubishi WD-60735 60", 3D Ready! w/3D Vision 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Corsair HX 850w Modular NZXT Tempest, Clear Side, 2 Yate Loon's/ 4 CM R4 RocketFish Bluetooth 
Mouse Pad
Don't need one works on any surface 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T@ 4.0Ghz 1.465v MSI 790FX-GD70 Palit GTX480 OCZ AMD BE 1600Mhz 4GB 
Hard DriveOptical DriveOSMonitor
Corsair 32GB SSD/WD Blue 500GB/ 1TB External SAMSUNG Black Blu-ray Combo Drive Windows 7 Ultimate 64bit Mitsubishi WD-60735 60", 3D Ready! w/3D Vision 
KeyboardPowerCaseMouse
Rocketfish Bluetooth Corsair HX 850w Modular NZXT Tempest, Clear Side, 2 Yate Loon's/ 4 CM R4 RocketFish Bluetooth 
Mouse Pad
Don't need one works on any surface 
  hide details  
Reply
post #6657 of 9641
Quote:
Originally Posted by Aqualoon View Post
Yeah, it's stuck at that 260 FSB marker. I can go higher, load into windows just fine but can't pass any type of stability testing.
You probable don't... but do you have the Green Power crap enabled in the bios?
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 RX Vega 56 G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
Ryzen
(12 items)
 
Dont tase me bro
(15 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 1700 Gigabyte GA-AX370-GAMING K7 RX Vega 56 G.Skill Trident Z DDR4-3200 F4-3200C16D-16GTZB 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate 4TB Wraith Spire (Stock) Windows 10 
MonitorPowerCaseAudio
Dell S2415H SeaSonic G Series SSR-550RM 550W Corsair 450D Onboard 
CPUMotherboardGraphicsRAM
Phenom II 1045T @ 3.6Ghz  MSI 790FX-GD70 EVGA GTX660 2x4GB Samsung Green Low Pro 1600Mhz 9-9-9-24-30-1T 
Hard DriveOptical DriveCoolingOS
500GB WD Caviar Blue, Samsung F3 1TB, Crucial M... 2xDVDRW Arctic Cooling Freezer 13 Limited Edition Windows 7, Windows 10, Ubuntu 
MonitorPowerCaseOther
Dell S2415H OCZ GameXstream 700w Antec 900 TP-LINK Archer T9E AC1900 PCI-E WiFi Adapter 
  hide details  
Reply
post #6658 of 9641
Quote:
Originally Posted by CryWin View Post
You probable don't... but do you have the Green Power crap enabled in the bios?
Nope, all that type of stuff is turned off
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply
Razer Blade
(11 items)
 
  
CPUGraphicsRAMHard Drive
i7 6700HQ GTX 970M 6GB 16GB DDR4 Samsung 960 Evo 500GB 
OSMonitorKeyboardMouse
W10 Pro x64 Dell U3417W Ultrawide 34" Razer BlackWidow Chroma Razer Naga Epic Chroma 
Mouse PadAudioOther
Razer Vespula Asus Xonar U5 Razer Orbweaver Chroma 
  hide details  
Reply
post #6659 of 9641
Hey guys im still new to overclocking and I get easily confused lol... Anyways I overclocked my proc to 3.8 @ 1.4v on the 1.6 bios and really didnt change anything else. I wanna achieve 4.0GHz, but just by changing the multi to reach 4GHz... it becomes unstable, so what I'm asking is whats the next thing I should change whether it be fsb or what not and what should i set it to so i can turn my multi up to get 4GHz stable and what voltage do you think i should set it at?
The_Dustmite
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 C3 @ 3.8ghz MSI 790fx-gd70 PNY XLR8 GTX 470 4GB G.Skill Ripjaw @ 1600mhz 
Hard DriveOSMonitorPower
1TB Caviar Black Windows 7 Ultimate 64 bit 24" Asus MS238H 2ms 750w Corsair 
Case
Smilodon Raidmax 
  hide details  
Reply
The_Dustmite
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 C3 @ 3.8ghz MSI 790fx-gd70 PNY XLR8 GTX 470 4GB G.Skill Ripjaw @ 1600mhz 
Hard DriveOSMonitorPower
1TB Caviar Black Windows 7 Ultimate 64 bit 24" Asus MS238H 2ms 750w Corsair 
Case
Smilodon Raidmax 
  hide details  
Reply
post #6660 of 9641
Quote:
Originally Posted by Aqualoon View Post
Nope, all that type of stuff is turned off
Well what is your Freq at For your ram when you are @260 and what does it become at 261? What is your ram rated for (Freq, timings and volts) and what is it set to?


Quote:
Originally Posted by Nightcrawla View Post
Hey guys im still new to overclocking and I get easily confused lol... Anyways I overclocked my proc to 3.8 @ 1.4v on the 1.6 bios and really didnt change anything else. I wanna achieve 4.0GHz, but just by changing the multi to reach 4GHz... it becomes unstable, so what I'm asking is whats the next thing I should change whether it be fsb or what not and what should i set it to so i can turn my multi up to get 4GHz stable and what voltage do you think i should set it at?
You should need be adjusting your CPU Voltage. Don't touch the CPU VDD Voltage. You may very well need to bump the CPU Voltage to 1.45v-1.475v. I can run completely 24/7stable @ 3.8 (200x19) with CPU Voltage set to auto and it registers in CPU-Z as 1.386v during full load, 1.392v @ idle. BUT, When I set the CPU Multi to 20 for 4.0ghz I have to set my CPU Voltage in Bios to 1.48v. In Windows it will register @ 1.472v at idle and at full load it bounces back and forth every few seconds between 1.456v and 1.464v. So that may be your issue.
Edited by Mastiffman - 5/10/10 at 5:51pm
SAM3 Water Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II x4 C3 955 @ 4.1Ghz w/3Ghz NB MSI 790FX-GD70 Sapphire VAPOR-X 5770 1060/1515mhz 4Gb Kit OCZ FlexEX WaterCooled 1600mhz 6-6-6-18 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 32Gb, WD Green 500Gb, WD Green 2Tb 1x Sammy DVD/ 1x LiteOn BD-Rom Windows 7 Professional 64bit Acer H243H 24" 1080P HD 
KeyboardPowerCaseMouse
MS Media Raidmax 850W Silverstone Raven RV02B-W Labtech 
Mouse Pad
Gen 
  hide details  
Reply
SAM3 Water Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II x4 C3 955 @ 4.1Ghz w/3Ghz NB MSI 790FX-GD70 Sapphire VAPOR-X 5770 1060/1515mhz 4Gb Kit OCZ FlexEX WaterCooled 1600mhz 6-6-6-18 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 32Gb, WD Green 500Gb, WD Green 2Tb 1x Sammy DVD/ 1x LiteOn BD-Rom Windows 7 Professional 64bit Acer H243H 24" 1080P HD 
KeyboardPowerCaseMouse
MS Media Raidmax 850W Silverstone Raven RV02B-W Labtech 
Mouse Pad
Gen 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › AMD › AMD Motherboards › [Official] MSI 790FX-GD70 Owners Club