Originally Posted by wiz-kid
ok i assume i should mention that i was overclocking the cpu and what happened and see what they say.
Whoa, sorry to hear about your board! It seems strange that it would fry at only 1.5v with an H50... I feel partially at fault for leading you to your board's death.
Same thing actually happened to me before as well, but I had gone up to 1.57v-1.6v (though it happened when I lowered it back down to 1.45v) and that was before getting my H50.
As for the RMA process, you don't have to say you were overclocking, but just state that your VRMs are fried and they will replace it for you. You can go to the MSI website and register your motherboard and request a RMA with them. After they approve you, all you have to do is ship it to them.
For future reference: your northbridge temp, it should be the Aux temp in HWMonitor, Temp2 in Speedfan. Everest reports a different temp that is more related to your CPU-NB than your actual northbridge, so before replacing the pink sticky gunk temps are usually around 45-55C. I used AS-5 and get about 30-35C during the winter, 33-40C in the summer.