Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › Club for those with beastly mATX/ITX rigs.
New Posts  All Forums:Forum Nav:

Club for those with beastly mATX/ITX rigs. - Page 304

post #3031 of 13149
Quote:
Originally Posted by MarvinDessica View Post

I present unto you a challenge OCN! Help me downsize the hell out of my PC!
Things I want to keep:
2500k
580
Ram
Hard-Drive
Optical Drive
If possible, but will go and downsize if needed:
Power Supply
Sound Card (Might sell anyway, replace with a cheaper variant)
Corsair H60
Obviously going:
Motherboard
Case
Would it be worth it? I can easily get 300 or more if I were to sell my motherboard, case, powersupply, cooler and sound card. Better question is would it even be worth it and could I reacquire everything to have my PC back up and running on 300 bucks? It's starting to look neigh impossible to be honest because the only cases I want would be almost 200 alone.

NZXT Vulcan is cheap, but probably not what you were going for.
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
2600K @ 5.0 ASUS Maximus IV Extreme Sapphire/Powercolor 7950 CF G.Skill Ripjaws X 4x4GB 
Hard DriveHard DriveCoolingCooling
OCZ Vertex 3 60GB's RAID 0 VelociRaptor 300GB EK Maximus IV Block EK FC-7950 Block x2 
CoolingCoolingCoolingCooling
EK Supreme HF Block D5 w/ BP Dress-up Kit XSPC EX240 Black Ice SR1 360 
CoolingCoolingOSMonitor
Primochill PrimoFlex 1/2" ID Black 14 NZXT Fans Windows 7 Professional x64 3x AOC 2436V 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate BF3 Edition Corsair HX1000 NZXT Switch 810 Black Razer Imperator BF3 Edition 
AudioAudio
Asus Xonar Essence STX Beyerdynamic DT770 250 Ohm 
CPUMotherboardGraphicsRAM
i5-2500K Asus Maximus IV Gene-Z AMD Radeon HD 5970 G.Skill Ripjaws X DDR3-1600 
Hard DriveHard DriveCoolingCooling
Vertex 3 60GB RAID 0 VelociRaptor 300GB XSPC EX240 Rad Black Ice GT 92MM Rad 
CoolingCoolingCoolingCooling
Black Ice GT 120MM Rad EK Supreme HF CPU Block EK 5970 Block XSPC 450 Pump/Res Combo 
OSMonitorKeyboardPower
Windows 7 Professional x64 3x AOC 2436vw Razer Black Widow Ultimate BF3 Edition Rosewill 750W HIVE 
CaseMouseMouse PadAudio
NZXT Vulcan Razer Imperator BF3 Edition Razer Scarab BF3 Edition ASUS Xonar Essence STX 
Audio
Beyerdynamic DT770 250 Ohm 
  hide details  
Reply
post #3032 of 13149
Quote:
Originally Posted by psyclum View Post

on your budget the SG07 may be a stretch. the case cost $200, the only real salvage part from your old machine would be the CPU, RAM, and HDD. everything else really needs to be replaced. the sound card, you can stay with the onboard audio since all ITX boards come with HD audio(primary market for ITX is the HTPC market afterall). it's not the best quality sound, but unless you have an awesome stereo system hooked up to it,(or have a very well trained ear) you wont really hear much difference anyway.
so the parts you'll need you want in on the SG07:
mobo, obviously you'll need a ITX board:D
AXP140, the H60 wouldn't fit if you intend to keep the AP181 case fan. I would strongly recommend you keep the ap181 and get a AXP140 and run that on passive.
slim optical, i would consider this optional since external optical makes much more sense in modern day computing
SSD, even a small 60 gig SSD would make a world of difference for your computing experience. I can't honestly suggest any modern build w/o one.
IF you decide to keep your $300 budget, then I would definitely suggest the TJ08-E for overall performance, flexibility, as well as good looks. it's not THAT big, however, you will need to replace your mobo and powersupply since they are both too big for that case. the arc miNi will fit your powersupply, however it's also a bigger case and IMO doesn't look as good or have as good of a cooling capacity w/o aftermarket fans.

I loved this post so much. While I am seriously reconsidering going trough with it at this very moment, I'll definitely be planning it out before I go trough with it in the new couple of months smile.gif +rep!thumb.gif

And that's true, I even have an eternal dvd drive I never use but will definitely throw in that "for sale" pile when the time comes.
post #3033 of 13149
Quote:
Originally Posted by MarvinDessica View Post

I loved this post so much. While I am seriously reconsidering going trough with it at this very moment, I'll definitely be planning it out before I go trough with it in the new couple of months smile.gif +rep!thumb.gif
And that's true, I even have an eternal dvd drive I never use but will definitely throw in that "for sale" pile when the time comes.

for planning purposes, I would strongly recommend you look into this build log by raginginferno. i consider his build the quint essential "how to guide on an ITX gamer build". fortunately intel based ITX mobo generally follow the same layout so you can get an updated Z68 board and the components will still fit. just eyeball the board to make sure it's using the same layout before you order it.
post #3034 of 13149
Quote:
Originally Posted by psyclum View Post


on your budget the SG07 may be a stretch. the case cost $200, the only real salvage part from your old machine would be the CPU, RAM, and HDD. everything else really needs to be replaced. the sound card, you can stay with the onboard audio since all ITX boards come with HD audio(primary market for ITX is the HTPC market afterall). it's not the best quality sound, but unless you have an awesome stereo system hooked up to it,(or have a very well trained ear) you wont really hear much difference anyway.

so the parts you'll need you want in on the SG07:
mobo, obviously you'll need a ITX board:D
AXP140, the H60 wouldn't fit if you intend to keep the AP181 case fan. I would strongly recommend you keep the ap181 and get a AXP140 and run that on passive.
slim optical, i would consider this optional since external optical makes much more sense in modern day computing
SSD, even a small 60 gig SSD would make a world of difference for your computing experience. I can't honestly suggest any modern build w/o one.

IF you decide to keep your $300 budget, then I would definitely suggest the TJ08-E for overall performance, flexibility, as well as good looks. it's not THAT big, however, you will need to replace your mobo and powersupply since they are both too big for that case. the arc miNi will fit your powersupply, however it's also a bigger case and IMO doesn't look as good or have as good of a cooling capacity w/o aftermarket fans.

I agree with most of this post except one point. The H60 should easily fit inside the SG07 with the AP181. All you need are some washers and to position them on the grill. If people can fit an H70 in there with a second fan, an H60 should be no problem.
     
CPUMotherboardGraphicsRAM
Intel Core i5 3450S Asus P8H77-I AMD HD7790 G.Skill Sniper  
Hard DriveHard DriveHard DriveHard Drive
WD Scorpio Black OCZ Vertex II Samsung HD204UI Samsung HD204UI 
Hard DriveMonitorKeyboardPower
Samsung HD204UI LG L246WP Razer Blackwidow Ultimate PicoPSU-160-XT 
CaseMouseAudio
My desk Razer DeathAdder 3.5G Fiio E10 USB DAC 
CPUGraphicsRAMHard Drive
Intel i7-3615QM GT 650m Samsung Crucial M4 
Hard DriveOSMonitorPower
Seagate ST1000LM024 HN-M101MBB Windows 7 Ultimate 64-Bit 17.3" 1920x1080 Delta SADP-90FH D 90W 
MouseAudio
Logitech M505 Fiio E10 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 3450S Asus P8H77-I AMD HD7790 G.Skill Sniper  
Hard DriveHard DriveHard DriveHard Drive
WD Scorpio Black OCZ Vertex II Samsung HD204UI Samsung HD204UI 
Hard DriveMonitorKeyboardPower
Samsung HD204UI LG L246WP Razer Blackwidow Ultimate PicoPSU-160-XT 
CaseMouseAudio
My desk Razer DeathAdder 3.5G Fiio E10 USB DAC 
CPUGraphicsRAMHard Drive
Intel i7-3615QM GT 650m Samsung Crucial M4 
Hard DriveOSMonitorPower
Seagate ST1000LM024 HN-M101MBB Windows 7 Ultimate 64-Bit 17.3" 1920x1080 Delta SADP-90FH D 90W 
MouseAudio
Logitech M505 Fiio E10 
  hide details  
Reply
post #3035 of 13149
Quote:
Originally Posted by armourcore9brker View Post

I agree with most of this post except one point. The H60 should easily fit inside the SG07 with the AP181. All you need are some washers and to position them on the grill. If people can fit an H70 in there with a second fan, an H60 should be no problem.

not sure how that's done. as far as i know, if you wanted to mount the H60, you'll have to remove the AP181 and use the filter bracket that came with the case as the mounting point for the H60 rad.

205

notice the filter bracket in the middle with the 120mm mounting holes in that picture? usually you'd mount the rad on those mounting holes and put a push fan under that.

if you want to keep the ap181, you'll have to construct your own mounts and that would be a fairly complicated modding job. there are other mounting points that CAN be modded into the case, but all require a good amount of planning/cutting and I don't think it would be the intent of this project.
post #3036 of 13149
working on painting my Fractal Design Core 1000 right now, and I'll be popping in a Maximus III Gene and an i7-875k soon biggrin.gif
CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
post #3037 of 13149
Quote:
Originally Posted by psyclum View Post

205


AP181 fans have a built in grill (necessary for the design).

You have to slide the washers to fit in between the fan and the grill. You can't use tall screws either.
     
CPUMotherboardGraphicsRAM
Intel Core i5 3450S Asus P8H77-I AMD HD7790 G.Skill Sniper  
Hard DriveHard DriveHard DriveHard Drive
WD Scorpio Black OCZ Vertex II Samsung HD204UI Samsung HD204UI 
Hard DriveMonitorKeyboardPower
Samsung HD204UI LG L246WP Razer Blackwidow Ultimate PicoPSU-160-XT 
CaseMouseAudio
My desk Razer DeathAdder 3.5G Fiio E10 USB DAC 
CPUGraphicsRAMHard Drive
Intel i7-3615QM GT 650m Samsung Crucial M4 
Hard DriveOSMonitorPower
Seagate ST1000LM024 HN-M101MBB Windows 7 Ultimate 64-Bit 17.3" 1920x1080 Delta SADP-90FH D 90W 
MouseAudio
Logitech M505 Fiio E10 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 3450S Asus P8H77-I AMD HD7790 G.Skill Sniper  
Hard DriveHard DriveHard DriveHard Drive
WD Scorpio Black OCZ Vertex II Samsung HD204UI Samsung HD204UI 
Hard DriveMonitorKeyboardPower
Samsung HD204UI LG L246WP Razer Blackwidow Ultimate PicoPSU-160-XT 
CaseMouseAudio
My desk Razer DeathAdder 3.5G Fiio E10 USB DAC 
CPUGraphicsRAMHard Drive
Intel i7-3615QM GT 650m Samsung Crucial M4 
Hard DriveOSMonitorPower
Seagate ST1000LM024 HN-M101MBB Windows 7 Ultimate 64-Bit 17.3" 1920x1080 Delta SADP-90FH D 90W 
MouseAudio
Logitech M505 Fiio E10 
  hide details  
Reply
post #3038 of 13149
Here's a small preview of my case mod that was inspired by this thread. This will be part of the case housing my i7-875k / X3470 mATX build.

CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
post #3039 of 13149
Quote:
Originally Posted by armourcore9brker View Post

AP181 fans have a built in grill (necessary for the design).
You have to slide the washers to fit in between the fan and the grill. You can't use tall screws either.

hum.. i'm having difficulty seeing it in my head since the built in grill for the AP181 is pretty close to the fan blades themselves. how would you mount the screw/nut onto the built in grill w/o actually hitting the fan blades? would you happen to have a pic of how it's done? i'm intrigued on how it's done now biggrin.gif personally, if i were to do a mod on something like that, i'd likely go with some kind of superglue solution, but if there is a way to mount it more securely i'm all for learning it smile.gif
post #3040 of 13149
I don't have an AP181 to show but you'd use counter-sunk screws:

514P632-4P.jpg

And a flat washer:

stainless-flat-washer-WSS-0632.jpg

If anything, the weight from the rad will bow out the grill slightly. This shouldn't be a problem in terms of breaking though since the weight is spread out among the washers.
     
CPUMotherboardGraphicsRAM
Intel Core i5 3450S Asus P8H77-I AMD HD7790 G.Skill Sniper  
Hard DriveHard DriveHard DriveHard Drive
WD Scorpio Black OCZ Vertex II Samsung HD204UI Samsung HD204UI 
Hard DriveMonitorKeyboardPower
Samsung HD204UI LG L246WP Razer Blackwidow Ultimate PicoPSU-160-XT 
CaseMouseAudio
My desk Razer DeathAdder 3.5G Fiio E10 USB DAC 
CPUGraphicsRAMHard Drive
Intel i7-3615QM GT 650m Samsung Crucial M4 
Hard DriveOSMonitorPower
Seagate ST1000LM024 HN-M101MBB Windows 7 Ultimate 64-Bit 17.3" 1920x1080 Delta SADP-90FH D 90W 
MouseAudio
Logitech M505 Fiio E10 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 3450S Asus P8H77-I AMD HD7790 G.Skill Sniper  
Hard DriveHard DriveHard DriveHard Drive
WD Scorpio Black OCZ Vertex II Samsung HD204UI Samsung HD204UI 
Hard DriveMonitorKeyboardPower
Samsung HD204UI LG L246WP Razer Blackwidow Ultimate PicoPSU-160-XT 
CaseMouseAudio
My desk Razer DeathAdder 3.5G Fiio E10 USB DAC 
CPUGraphicsRAMHard Drive
Intel i7-3615QM GT 650m Samsung Crucial M4 
Hard DriveOSMonitorPower
Seagate ST1000LM024 HN-M101MBB Windows 7 Ultimate 64-Bit 17.3" 1920x1080 Delta SADP-90FH D 90W 
MouseAudio
Logitech M505 Fiio E10 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Small Form Factor Systems
Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › Club for those with beastly mATX/ITX rigs.