Originally Posted by Ktulu
Oh cool. It is really hard to figure out the small space issues. I have been bouncing around some ideas for a duct to pipe exhaust out of the case. I have 1 duct already, but I would work so much better in a push set up.
Hmmm... I have my GPU + H50 pulling out most of my hot air from my SG02-F. It hurts to setup, but it's fine
(I need to shut it down to move the HDD, in a few min).
Originally Posted by mr. biggums
well i'm thinking of grabbing this memory here
, along with a i3 530 to play around with, as i said before i will be grabbing the v352 whenever it comes out, along with my existing components so cooler wise I'll have to make a decision once i get the case, from pictures i cant tell if the space above the motherboard is removable or not too allow room for tower coolers.
The V352 should be able to fit a decent tower cooler, as the PSU is not directly over the CPU area (where the SG02 places it).