Overclock.net › Forums › General Hardware › General Processor Discussions › [Official] +1GHz Overclock Club
New Posts  All Forums:Forum Nav:

[Official] +1GHz Overclock Club - Page 14

post #131 of 5818
Quote:
Originally Posted by nolonger View Post
Well, I have a 300 FSB and 12.5x multiplier. My E5200 is a M0 stepping. My BIOS is version 0410 I think. I have my vCore set to 1.375V on the BIOS which comes out to 1.36V in CPU-Z, loadline calibration is on. My NB is running at 1.39V. RAM is at 800MHz 6-6-6-18 (factory, and yes I know they're horrible) 1.8V. All other settings are on default values.
Well I'm not familiar with the settings on your MOBO but what about you FSB volts? You also have more room on your vcore as long as temps are good.
Instead off using Auto or Default try putting the settings in manually.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #132 of 5818
Quote:
Originally Posted by NoGuru View Post
Well I'm not familiar with the settings on your MOBO but what about you FSB volts? You also have more room on your vcore as long as temps are good.
Instead off using Auto or Default try putting the settings in manually.
Yea, I actually set everything up manually I just meant to say everything else is stock. What is the FSB voltage? FSB Termination? PLL Voltage?
Edited by nolonger - 9/23/09 at 2:16pm
post #133 of 5818
Quote:
Originally Posted by nolonger View Post
Yea, I actually set everything up manually I just meant to say everything else is stock. What is the FSB voltage? FSB Termination? PLL Voltage?
Ok, FSB is CPU term, and should be just under CPU volts. PLL is what is takes to boot into Windows, usually around 1.50 to 1.60
So if your Vcore in Bios is 1.37 term should be around 1.35 and PLL shoul be around 1.57.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #134 of 5818
Quote:
Originally Posted by NoGuru View Post
Ok, FSB is CPU term, and should be just under CPU volts. PLL is what is takes to boot into Windows, usually around 1.50 to 1.60
So if your Vcore in Bios is 1.37 term should be around 1.35 and PLL shoul be around 1.57.
Alright, I'll try that once I get my cooler back in my computer, just lapped it!
post #135 of 5818
Quote:
Originally Posted by nolonger View Post
Alright, I'll try that once I get my cooler back in my computer, just lapped it!
Nice any pics?
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #136 of 5818
Quote:
Originally Posted by NoGuru View Post
Nice any pics?
I'd be ashamed, I didn't even remove all of the aluminum base, just kinda made it straight (was very convex, took 2:30 to make straight).

EDIT: Ah, what the hell...

You can see where I lapped to from the small copper outline.
Edited by nolonger - 9/23/09 at 3:07pm
post #137 of 5818
I need to have my son's E2180 added, its at 3.2 ghz (from stock 2.0)


Edited by CravinR1 - 9/24/09 at 7:26am
post #138 of 5818
http://valid.canardpc.com/show_oc.php?id=727505

Need better cooling for 4GHz+.

CPU batch: L924B514T

Measured voltage vcore DMM: idle 1.438v - load 1.358v

White Shark
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K Asus MAXIMUS IV GENE-Z XFX Radeon HD 6950 1GB Dual Fan Corsair XMS3 DDR3 2000MHz 16GB 
Hard DriveCoolingOSMonitor
520 240GB+X25-M G2 80GB+5.5TB CM 212 EVO Windows 7 Enterprise x64 Eizo 23 LCD Foris FS233 
KeyboardPowerCaseMouse
MS PS/2 Corsair HX 750W  Corsair Carbide 500R Tower white Logitech MX518 
Mouse PadAudio
Norlink Gel mb 
  hide details  
Reply
White Shark
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K Asus MAXIMUS IV GENE-Z XFX Radeon HD 6950 1GB Dual Fan Corsair XMS3 DDR3 2000MHz 16GB 
Hard DriveCoolingOSMonitor
520 240GB+X25-M G2 80GB+5.5TB CM 212 EVO Windows 7 Enterprise x64 Eizo 23 LCD Foris FS233 
KeyboardPowerCaseMouse
MS PS/2 Corsair HX 750W  Corsair Carbide 500R Tower white Logitech MX518 
Mouse PadAudio
Norlink Gel mb 
  hide details  
Reply
post #139 of 5818
Quote:
Originally Posted by CravinR1 View Post
I need to have my son's E2180 added, its at 3.2 ghz (from stock 2.0)

Added to the list under your name.

Quote:
Originally Posted by Retoric View Post
http://valid.canardpc.com/show_oc.php?id=727505

Need better cooling for 4GHz+.

CPU batch: L924B514T

Measured voltage vcore DMM: idle 1.438v - load 1.358v

Welcome to the 1GHz Overclock Club, Retoric!
post #140 of 5818
Add mine please

E5300 2.6 stock @ 4.16
~ 8 hrs large FFT Prime 95 stress test stable, and Intel Burn Test
5.74 w/Dryce but crashes (RAM limitation )

http://www.overclock.net/intel-cpus/...ml#post7036674
Mains - Test Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5300 2.6ghz@4.16ghz 1.3725v, 5.74ghz/1.54v DRYCE G31M-ES2L Modded GTS250 and 8600GT Oc'ed 2x1GB Transcend 667 test /2x2GB 1066 OCZ Platinum 
Hard DriveOptical DriveOSMonitor
Seagate 250GB + Samsung 750GB 16x Pioneer DVD Dual Layer Windows 7 Ultimate 64bit SP2 HP w1907 
KeyboardPowerCaseMouse
$20 el-cheapo OfficeOne CM eXtreme Power Pro 500 None - Out in open Some 10 yr old balled mouse 
  hide details  
Reply
Mains - Test Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5300 2.6ghz@4.16ghz 1.3725v, 5.74ghz/1.54v DRYCE G31M-ES2L Modded GTS250 and 8600GT Oc'ed 2x1GB Transcend 667 test /2x2GB 1066 OCZ Platinum 
Hard DriveOptical DriveOSMonitor
Seagate 250GB + Samsung 750GB 16x Pioneer DVD Dual Layer Windows 7 Ultimate 64bit SP2 HP w1907 
KeyboardPowerCaseMouse
$20 el-cheapo OfficeOne CM eXtreme Power Pro 500 None - Out in open Some 10 yr old balled mouse 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Processor Discussions
Overclock.net › Forums › General Hardware › General Processor Discussions › [Official] +1GHz Overclock Club