Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Corsair Obsidian 900D/800D/750D/700D/650D/550D/450D/350D/250D Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Obsidian 900D/800D/750D/700D/650D/550D/450D/350D/250D Club - Page 48

post #471 of 8657
Quote:
Originally Posted by ShadowFox19 View Post
Triggs,
Could you give me the following dimensions?

A: Max dimesions the motherboard tray area
B: From the top of the case, on the inside, to the edge of the motherboard
C: How wide of a rad can fit down there?
Here are some of the measurements for you. Not sure this is much help for you, but didn't have much time to do detail.

A. From the back slots to the HDD plastic piece that covers the hot swappable wires is 362mm and the plastic cover is 31.75mm wide.

B. I am not able to get a good straight measurement, but this is what I posted earlier. I have the EK RAD that is 47mm thick and I have 25mm fans attached to it. The remaining space I have is 34.9mm to the top of the motherboard. Adding that up, it gives you 106.9mm give or take.

Here is a closer pic.



C. As my post just above, My EK RAD fits just fine in the bottom section standing on it's side with a mm or two to spare. The EK RAD is (LxWxH): 276 x 123 x 47mm

Chad
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
post #472 of 8657
Quote:
Originally Posted by triggs75 View Post
Here are some of the measurements for you. Not sure this is much help for you, but didn't have much time to do detail.

A. From the back slots to the HDD plastic piece that covers the hot swappable wires is 362mm and the plastic cover is 31.75mm wide.

B. I am not able to get a good straight measurement, but this is what I posted earlier. I have the EK RAD that is 47mm thick and I have 25mm fans attached to it. The remaining space I have is 34.9mm to the top of the motherboard. Adding that up, it gives you 106.9mm give or take.

Here is a closer pic.



C. As my post just above, My EK RAD fits just fine in the bottom section standing on it's side with a mm or two to spare. The EK RAD is (LxWxH): 276 x 123 x 47mm

Chad
Thanks for the measurements, Chad! +rep
One more question in regards to measurement A:
What is the distance from the top of the motherboard (relatively speaking in the picture) to the horizontal divider in the case?

I'm asking because I was wondering if it's going to be possible to fit the upcoming dual Xeon EVGA board, it's measurements are 381mm by 345mm.
It seems that it will fit if one removes the cover of the hot-swap backplate...but I'm unsure about the other dimension.

Here are the comparison measurements between the Classified E760 and the dual socket board:
(I don't know which is W and L, so I just put them relative to each other)
305mm x 264mm
345mm x 381mm
    
CPUGraphicsRAMHard Drive
Intel Core i7 2720QM NVIDIA Quadro 2000M 16GB DDR3 1333 80GB mSATA SSD (OS) / 500GB Samsung 
Optical DriveOSKeyboardCase
DVD-R Windows 7 64-bit Professional Das Keyboard Model S Professional Lenovo W520 
MouseMouse Pad
Roccat Kone[+] Roccat Sota 
  hide details  
Reply
    
CPUGraphicsRAMHard Drive
Intel Core i7 2720QM NVIDIA Quadro 2000M 16GB DDR3 1333 80GB mSATA SSD (OS) / 500GB Samsung 
Optical DriveOSKeyboardCase
DVD-R Windows 7 64-bit Professional Das Keyboard Model S Professional Lenovo W520 
MouseMouse Pad
Roccat Kone[+] Roccat Sota 
  hide details  
Reply
post #473 of 8657
Would not sugggest trying to fit that board in the obsidian, you are going to have issues with cable management holes (the board will cover them all up) and i am pretty sure it won't actualy fit in. A much more suited case would be the TJ07, since it is designed to take dual socket motherboards.
POLARity
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4GHz MSI Big Bang Xpower 2x 5850 @ 765MHz/1120MHz 6GB Corsair Dominator DDR3 CL7 1600MHz 
Hard DriveOSMonitorKeyboard
Corsair 64GB SSD | 4x Samsung F3 1TB RAID10 Win7 Professional 64bit Samsung P2770H 27" Roccat Arvo 
PowerCaseMouseMouse Pad
Enermax Revolution 850W POLARity TJ07 Roccat Kone Roccat Sota 
  hide details  
Reply
POLARity
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4GHz MSI Big Bang Xpower 2x 5850 @ 765MHz/1120MHz 6GB Corsair Dominator DDR3 CL7 1600MHz 
Hard DriveOSMonitorKeyboard
Corsair 64GB SSD | 4x Samsung F3 1TB RAID10 Win7 Professional 64bit Samsung P2770H 27" Roccat Arvo 
PowerCaseMouseMouse Pad
Enermax Revolution 850W POLARity TJ07 Roccat Kone Roccat Sota 
  hide details  
Reply
post #474 of 8657
Quote:
Originally Posted by oliverw92 View Post
Would not sugggest trying to fit that board in the obsidian, you are going to have issues with cable management holes (the board will cover them all up) and i am pretty sure it won't actualy fit in. A much more suited case would be the TJ07, since it is designed to take dual socket motherboards.
I never said it wasn't going to take a little modifying to get it to fit. If it doesn't fit in an 800D, it's not going to fit in a TJ07.

Just look at these two pictures and tell me which has more room:



    
CPUGraphicsRAMHard Drive
Intel Core i7 2720QM NVIDIA Quadro 2000M 16GB DDR3 1333 80GB mSATA SSD (OS) / 500GB Samsung 
Optical DriveOSKeyboardCase
DVD-R Windows 7 64-bit Professional Das Keyboard Model S Professional Lenovo W520 
MouseMouse Pad
Roccat Kone[+] Roccat Sota 
  hide details  
Reply
    
CPUGraphicsRAMHard Drive
Intel Core i7 2720QM NVIDIA Quadro 2000M 16GB DDR3 1333 80GB mSATA SSD (OS) / 500GB Samsung 
Optical DriveOSKeyboardCase
DVD-R Windows 7 64-bit Professional Das Keyboard Model S Professional Lenovo W520 
MouseMouse Pad
Roccat Kone[+] Roccat Sota 
  hide details  
Reply
post #475 of 8657
Oo good point. All i know is, dual socket opterons fit in the TJ07 :7
POLARity
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4GHz MSI Big Bang Xpower 2x 5850 @ 765MHz/1120MHz 6GB Corsair Dominator DDR3 CL7 1600MHz 
Hard DriveOSMonitorKeyboard
Corsair 64GB SSD | 4x Samsung F3 1TB RAID10 Win7 Professional 64bit Samsung P2770H 27" Roccat Arvo 
PowerCaseMouseMouse Pad
Enermax Revolution 850W POLARity TJ07 Roccat Kone Roccat Sota 
  hide details  
Reply
POLARity
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4GHz MSI Big Bang Xpower 2x 5850 @ 765MHz/1120MHz 6GB Corsair Dominator DDR3 CL7 1600MHz 
Hard DriveOSMonitorKeyboard
Corsair 64GB SSD | 4x Samsung F3 1TB RAID10 Win7 Professional 64bit Samsung P2770H 27" Roccat Arvo 
PowerCaseMouseMouse Pad
Enermax Revolution 850W POLARity TJ07 Roccat Kone Roccat Sota 
  hide details  
Reply
post #476 of 8657
I have appropriated funds for the 800D and I would like to order it either tomorrow or after tomorrow but I must be sure that the fins I chose will not have any problem being secured especially those 120mm Blue Led Yate Loon's at the top as exhaust fans. I'd also like advice on what to do when unpacking the case and what if the case comes badly shipped from NCIX. Also I have a concern if I am unavailable to pick up the case from Fedex or UPS since I will likely be away from the house at work what can I do ?

I'm also confused who should I have it shipped with. I'm considering just sticking with the Ground Shipping Promo and the Free Shipping on my case but for the ground shipping promo they have Canada Post and Purolator. I am confused as I am not sure whom to choose.

This is what the order will look like:


Edited by 45nm - 1/19/10 at 4:55pm
post #477 of 8657
Thread Starter 
Quote:
Originally Posted by 45nm View Post
I have appropriated funds for the 800D and I would like to order it either tomorrow or after tomorrow but I must be sure that the fins I chose will not have any problem being secured especially those 120mm Blue Led Yate Loon's at the top as exhaust fans. I'd also like advice on what to do when unpacking the case and what if the case comes badly shipped from NCIX. Also I have a concern if I am unavailable to pick up the case from Fedex or UPS since I will likely be away from the house at work what can I do ?

I'm also confused who should I have it shipped with. I'm considering just sticking with the Ground Shipping Promo and the Free Shipping on my case but for the ground shipping promo they have Canada Post and Purolator. I am confused as I am not sure whom to choose.

This is what the order will look like:

The fans you picked will work great. The 140mm will replace the stock 140mm and the 120mm will fit up top as exhaust fans. As for shipping any will be ok to ship with. I haven't had any issues with any to be honest. I did noticed that Fedex is the faster of the bunch at shipping then Canada Post. But I would just get the free promo and go with Canada Post When unpacking the case just be careful and when removing the clear plastic film, just remove it slowly and carefully. Have fun with the new case
    
CPUMotherboardGraphicsGraphics
|Intel Core i7 970| |Asus Rampage III Formula X58| |Evga GTX580 Sli| |Evga GTS450 physx| 
RAMHard DriveHard DriveHard Drive
|6GB DDR3 2000Mhz Corsair Dominator GT| |Intel X25-M 160GB| |WD VelociRaptor 300GB Raid 0| |WD 4TB Storage| 
Optical DriveCoolingOSMonitor
|Samsung Multi-DVD Writer| |Custom H2O Loop| |Windows 7 Ultimate 64Bit| |Samsung 24" 2493HM| 
KeyboardPowerCaseMouse
|Logitech G19| |Corsair AX1200W| |Corsair Obsidian 800D| |Logitech G9| 
Mouse PadAudioAudioAudio
|Razer Destructor| |Asus Xonar Essence STX| |Logitech Z-5500| |Sennheiser HD555| 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
|Intel Core i7 970| |Asus Rampage III Formula X58| |Evga GTX580 Sli| |Evga GTS450 physx| 
RAMHard DriveHard DriveHard Drive
|6GB DDR3 2000Mhz Corsair Dominator GT| |Intel X25-M 160GB| |WD VelociRaptor 300GB Raid 0| |WD 4TB Storage| 
Optical DriveCoolingOSMonitor
|Samsung Multi-DVD Writer| |Custom H2O Loop| |Windows 7 Ultimate 64Bit| |Samsung 24" 2493HM| 
KeyboardPowerCaseMouse
|Logitech G19| |Corsair AX1200W| |Corsair Obsidian 800D| |Logitech G9| 
Mouse PadAudioAudioAudio
|Razer Destructor| |Asus Xonar Essence STX| |Logitech Z-5500| |Sennheiser HD555| 
  hide details  
Reply
post #478 of 8657
guys how is this case air cooling wise?
post #479 of 8657
45nm, those 120mm yates are horribly loud, did you even look at the dB? 40dB?!! And you have 6 of them??!!
POLARity
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4GHz MSI Big Bang Xpower 2x 5850 @ 765MHz/1120MHz 6GB Corsair Dominator DDR3 CL7 1600MHz 
Hard DriveOSMonitorKeyboard
Corsair 64GB SSD | 4x Samsung F3 1TB RAID10 Win7 Professional 64bit Samsung P2770H 27" Roccat Arvo 
PowerCaseMouseMouse Pad
Enermax Revolution 850W POLARity TJ07 Roccat Kone Roccat Sota 
  hide details  
Reply
POLARity
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 @ 4GHz MSI Big Bang Xpower 2x 5850 @ 765MHz/1120MHz 6GB Corsair Dominator DDR3 CL7 1600MHz 
Hard DriveOSMonitorKeyboard
Corsair 64GB SSD | 4x Samsung F3 1TB RAID10 Win7 Professional 64bit Samsung P2770H 27" Roccat Arvo 
PowerCaseMouseMouse Pad
Enermax Revolution 850W POLARity TJ07 Roccat Kone Roccat Sota 
  hide details  
Reply
post #480 of 8657
Well I supposed I will throw some pics up. Pretty happy with how mine turned out, although I am not one for planning so a few things didn't go as I wanted them to. I now have some really long tubing as a result in a couple spots, but I will worry about cutting it whenever I need to drain it in the future (probably when I get a new GPU). Other than that it looks good but the camera doesn't do it justice









I need to get some pics without the flash, it makes all the black look dirty and the tubing looks orange. But it's dark in the room right now so oh well!! Add me please
Edited by sublimejhn - 1/20/10 at 4:35am
    
CPUMotherboardGraphicsRAM
Core I7 920 D0@4.3Ghz 1.36v 24/7 HT on Foxconn Blood Rage EVGA GTX590 Classified HC 6GB Mushkin DDR3@8-8-8-19 1640 
Hard DriveOSMonitorPower
64GB Kingston v100 SSD/500GB Seagate+500GB WD R... Windows 7 Ultimate x64 NEC EA232WMi+2xemachines 5760x1080 surround Cooler Master 850w 
Case
Corsair 800D 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core I7 920 D0@4.3Ghz 1.36v 24/7 HT on Foxconn Blood Rage EVGA GTX590 Classified HC 6GB Mushkin DDR3@8-8-8-19 1640 
Hard DriveOSMonitorPower
64GB Kingston v100 SSD/500GB Seagate+500GB WD R... Windows 7 Ultimate x64 NEC EA232WMi+2xemachines 5760x1080 surround Cooler Master 850w 
Case
Corsair 800D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Corsair Obsidian 900D/800D/750D/700D/650D/550D/450D/350D/250D Club