Originally Posted by ncsa
Thanks for the Update there
I have another Q on these MBs, that is what is the Max HT it can run....I know all MBs are different but can this one > 350 it would be nice if it can do >400
Another thing if you can get some TCCD will it run 1T at DDR600+?
ncsa, the highest I was able to get on the Expert motherboard was 330 MHz. I think it is the processor that is holding the system back however, with my 3500+ NewCastle I hit 370 MHz.
Xavier1421 the Expert is easier to use than the older NF4 SLI-DR and you'll be very happy with it for sure!
deathdispenser thanks for the link, that is awesome to see (although I think Anandtech might have gotten a "special" board).
One thing I noticed however is that the Expert clock for clock is slower
than the older DFI LANParty NF4 SLI-DR when using low latency memory. With the setup the same (aside from the motherboard of course) and identical memory timings, my system is about 0.5 seconds slower in SuperPi 1M and 5-10 seconds slower in SuperPi 32m test and my 3DMark scores have fallen about 3%.
I have a suspicision that the BIOS' available for the Expert are tuned for high speed memory, not low latency since performance is similar to what I got with my old board using the 623/704 BIOS' (I was using the 510 tweaked for low latency with my old board). Patiently waiting for a low latency bios, hopefully that will bring performance back up.