Originally Posted by eCoManiac
Does anyone with this mb have either k10stat or PhenomMsrTweaker working? In particular, is either of these apps working stable with a cpu-nb overclock? If so, please share your settings. Thx.
Yep. Since NB voltage detection is finicky, while I have my voltage set to the needed 1.3v in the BIOS, it's set to 1.1v in K10Stat. Considering how K10Stat calculates voltages (It "adds on" to whatever the BIOS voltage is - so if it's 1.1v in the BIOS and you set to 1.5, it will become 1.5. But if it's 1.5v in the BIOS and you set it to 1.5... well.... *processor dies*
). The value should be still 1.3v even if it's set to 1.1 in K10Stat or PhenomMSRTweaker.
K10Stat allows for more P-States, but in the BIOS the multiplier (and CPU voltage too) should be left to auto - then you can set the proper multiplier in K10Stat. Be careful though, pair the wrong (too high or too low) multiplier with the wrong performance state and you could crash. I set my custom Cool'N'Quiet some time ago so I run at either 1ghz, 2ghz, 2.9ghz or 3.8ghz. It works fairly well. Edited by xd_1771 - 3/22/10 at 4:33pm