Overclock.net › Forums › AMD › AMD CPUs › [Official]AMD 4GHz+ CLUB
New Posts  All Forums:Forum Nav:

[Official]AMD 4GHz+ CLUB - Page 60

post #591 of 3066
Yay
Just put in my Seasonic PSU w/ H50 and bumped it to 4GHz.
Not too much work involved.

http://valid.canardpc.com/show_oc.php?id=1396299

Username : Beers
CPU : 1090T
Freq : 4000
Voltage : 1.4675
NB/HT both @ 2200.

Everything else is in sig/rig
post #592 of 3066
1.6v on a 1055t to achieve 4ghz? :/ Bit steep
I hit 4Ghz on 1.425v didnt even take more than a minute.
Anyway heres my entry >

http://valid.canardpc.com/show_oc.php?id=1395865
    
CPUMotherboardGraphicsRAM
Intel i5 2500k | 4.5Ghz @ uknownV Gigabyte GA-Z68-D3 ASUS EAH6970 | 1000/1300 1.3v 2x2GB Corsair Dominator 1600Mhz 8-8-8 
Hard DriveOSMonitorPower
Samsung Spinpoint F3 500GB Windows 7 Ultimate 64-Bit BenQ G2222HDL + Hanns-G HQ191D Sapphire FirePSU 625w 
Case
GlobalWin YCC-61F1B (Modding planned) 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 2500k | 4.5Ghz @ uknownV Gigabyte GA-Z68-D3 ASUS EAH6970 | 1000/1300 1.3v 2x2GB Corsair Dominator 1600Mhz 8-8-8 
Hard DriveOSMonitorPower
Samsung Spinpoint F3 500GB Windows 7 Ultimate 64-Bit BenQ G2222HDL + Hanns-G HQ191D Sapphire FirePSU 625w 
Case
GlobalWin YCC-61F1B (Modding planned) 
  hide details  
Reply
post #593 of 3066
Got my 1055T on friday and the results are amazing me so far.

I am stable at 4.2GHz when it's cold...I think I need some Kaze's or something to keep it stable though.

So far I have this clock stable for 24/7 use.

297x14=4158 Mhz
vcore 1.4875
NB @ 2674
RAM @ 1574Mhz 9-9-9-24
CPU/NB 1.3
NB 1.31
LLC enabled
everything else auto

Megahalems with push+pull.

I am getting more than a 50% increase in CPU benches/tasks over my 965BE @ 3.95GHz. Stoked

http://valid.canardpc.com/show_oc.php?id=1396328
Edited by BIG DWIFTER - 9/19/10 at 12:42am
Gaming Rig
(23 items)
 
  
CPUMotherboardGraphicsRAM
3570k Gigabyte Z77X-UD3H WB Gigabyte GTX 770 OC 2GB G Skill Ripjaws X 
Hard DriveHard DriveHard DriveOptical Drive
Samsung EVO SSD WD Caviar Black WD Caviar Blue LG Blu-Ray HD-DVD combo 
CoolingCoolingOSMonitor
Prolimatech Megahalems MegaShadow Zalman 120 windows 8.1 ASUS VK266H 
KeyboardPowerCaseMouse
Logitech G19 Corsair HX850 CM HAF932 Razer Mamba 
Mouse PadAudioOtherOther
Razer ExactMat ASUS Xonar D2X Logitech G27 Beyerdynamic DT 880 
OtherOtherOther
Behringer Ms40 Altec Lansing FX5051 Xbox wireless controller 
  hide details  
Reply
Gaming Rig
(23 items)
 
  
CPUMotherboardGraphicsRAM
3570k Gigabyte Z77X-UD3H WB Gigabyte GTX 770 OC 2GB G Skill Ripjaws X 
Hard DriveHard DriveHard DriveOptical Drive
Samsung EVO SSD WD Caviar Black WD Caviar Blue LG Blu-Ray HD-DVD combo 
CoolingCoolingOSMonitor
Prolimatech Megahalems MegaShadow Zalman 120 windows 8.1 ASUS VK266H 
KeyboardPowerCaseMouse
Logitech G19 Corsair HX850 CM HAF932 Razer Mamba 
Mouse PadAudioOtherOther
Razer ExactMat ASUS Xonar D2X Logitech G27 Beyerdynamic DT 880 
OtherOtherOther
Behringer Ms40 Altec Lansing FX5051 Xbox wireless controller 
  hide details  
Reply
post #594 of 3066
Quote:
Originally Posted by sendblink23 View Post
You only tested in minutes... how can you post 100% stable? =P

Random question since you mention about your rams...are you raising ram voltage or not? Sometimes the voltage its needed to be raised and it will make it bootable on the OS and give you chance to stable it as well(playing with the memory timings).... Well if you have been doing this then... no problem ahahha ignore it.

forgot to say... for possibilities of higher ram frequency... and since you have a 1055T... you might as well try to push your NB to between 2800Mhz or 3000Mhz.. that will help as well on the ram

-I testing it for more than 1 houre.
-Mushkin ram said 1.65mv at 2000mhz cl7. So i guess i dont have to raise the ram volt

-NB to 2800mhz-3000mhz ?? isnt that a bit high? is it dangerous in any way?
post #595 of 3066
Quote:
Originally Posted by alegelos View Post
-I testing it for more than 1 houre.
-Mushkin ram said 1.65mv at 2000mhz cl7. So i guess i dont have to raise the ram volt

-NB to 2800mhz-3000mhz ?? isnt that a bit high? is it dangerous in any way?
You can raise the voltage of the ram with no issues... just don't exagerate for example going to 2.5v(that will kill your ram extremely early)... they rate their ram with that "suppose" voltage of stock.. but sometimes for your hardware combination when going into the OS it seems like it isn't sufficient... like you said it didn't want to boot, going higher

There are tons of people who use 2.8 & 3.0 on NB no issue what so ever... it just depends if your mobo can handle it(sometimes is the bios version you are using, that lets you handle it.. some fail)... and as well if your good with the temps... it has been shown raising the NB helps you to get higher ram & tighter timings

Overclocking stress testings is not 1 hour to know if its stable... its around 3 hours or more example(some people go to the extreme to insure stability and do more than 24hours)... running Prime95 on Blend, LinX with "ALL" button pressed passing 20-30 passes or more... or wte other stressing application
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #596 of 3066
new OC 4.05ghz


bus 324
multi 12.5
volt 1.5
NB 2600-
HT 1900+

CPU-Z

100% stable 1 hour stress test
post #597 of 3066
update...

•Username: wermad
•CPU / Revision: Phenom II 955BE x4 C3
•CPU Clock: 4.2
•Cooling: EK Supreme HF
•CPU-Z Link: http://valid.canardpc.com/show_oc.php?id=1397177

edit: tried a Kamikaze run @ 4.4 but bsod while loading os. need to find a few more adjustments. I was surprised it went to 4.2 w/ a few tweaks. Will try some stability on 4.2 later, for now back to my stable 4.0.
Edited by wermad - 9/19/10 at 1:13am
post #598 of 3066
Hi!

Name: KubaCZ912
CPU: Amd Phenom II X6 1055T
CPU clock: 4,03 GHZ
Cooler: Cooler Master Hyper 212 Plus
CPU-Z link:http://valid.canardpc.com/show_oc.php?id=1398140

It's running on 100% load for more than 12 hours, so i think it's 100% stable.
My AMD rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T GA-890XA-UD3 Sapphire 5870 4gb 
Hard DriveOSPower
1tb WD Black Win 7 x64 ULTIMATE Fusion 550 
  hide details  
Reply
My AMD rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1055T GA-890XA-UD3 Sapphire 5870 4gb 
Hard DriveOSPower
1tb WD Black Win 7 x64 ULTIMATE Fusion 550 
  hide details  
Reply
post #599 of 3066
Thread Starter 
I'll be updating the list later on tonight, been busy at work the past couple of days and when i get home i've got a few things to get done before my computer will be up and running. So, updates will be in about 2 hours give or take.
Old man river
(13 items)
 
  
CPUMotherboardGraphicsRAM
955 @ 4.2GHz 880GA-UD3H GTX 460(24/7 folder) Ripjaws 
Hard DriveOSMonitorPower
Caviar Blue 320GB Win 7 SR2320L XFX XXX 650 
CaseMouse
Tecnofront HWD Logitech MX-518 
  hide details  
Reply
Old man river
(13 items)
 
  
CPUMotherboardGraphicsRAM
955 @ 4.2GHz 880GA-UD3H GTX 460(24/7 folder) Ripjaws 
Hard DriveOSMonitorPower
Caviar Blue 320GB Win 7 SR2320L XFX XXX 650 
CaseMouse
Tecnofront HWD Logitech MX-518 
  hide details  
Reply
post #600 of 3066
Here's one I did awhile back.
Note it was rejected due to the date it was submitted (7-9-10) but when I tried to get the presently used 1.55 version, it wasn't shown to be available for download, yet they had stopped accepting validations for ver 1.54 on that date.

No prob to redo if I must and yes, I plan on trying for more later - Bet on it.

Kryton
720BE Heka
4389MHz (231x19) - C2 stepping
H2O cooled / OCZ Hydroflow

http://valid.canardpc.com/show_oc.php?id=1285021
Edited by Kryton - 9/19/10 at 7:19pm
Smeg-O-Rama
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 ASRock P43DE3 Some old piece of smeg that actually works...? C.R.S. 
MonitorPower
Asus VH238-H 23' LCD A bunch of little pink bunnies with drums... 
  hide details  
Reply
Smeg-O-Rama
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 ASRock P43DE3 Some old piece of smeg that actually works...? C.R.S. 
MonitorPower
Asus VH238-H 23' LCD A bunch of little pink bunnies with drums... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › [Official]AMD 4GHz+ CLUB