Originally Posted by CalypsoRaz
As compression fittings go, is the status quo 1/2" ID-3/4" OD? The tubing I have currently is 7/16" ID and 5/8" OD with 1/2" ID-5/8" OD Bitspower fittings and are they ever a mf to tighten. Is this because of the tubing I'm using?
you have to use the same id and od tubing with compression fittings otherwise you risk having the tubing slip off, especially if the od is smaller than it is supposed to be even if the id of the tubing is smaller than the barb part on the compression fitting. Using the incorrect sized tubing is stupid.
btw... u only have to lightly hand tighten compression fittings. I've never had one slip off or leak after using them in multiple builds and 30 in my current build. If it doesn't match you WILL have problems eventually, especially when the loop heats up.
Originally Posted by soulster
Anyone know of a mid tower (similar sized to CM690IIAdv) to hole a triple rad up top? Or modded the case to hold a triple rad? Could probably cut out the hdrive dock since I don't use it lol.
Cheers in advance
mountain mods monticle can fit one up top and the Danger Den tower 21 can fit one up front. Both can be purchased in any color you want, just have to ask. DD is extremely accommodating. Open fan holes are an option on the Tower 21 if you don't like the DD logo.
Edited by fat_italian_stallion - 5/3/11 at 10:00pm