Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 1076

post #10751 of 106464
It's preference. A lot of people like quite PC's. I use headphones so I don't mind. Having a cooler system is a big part of going with water but I also pay attention temps "holding" temps. Having a cpu hold 56c with water is better than having an air cooler and seeing the temps just keep rising.

I know there are good air coolers but water cooling is nice and consistent. I'm now all water cooling and love how my vid cards hold a nice 50ish C temp while gaming instead of 100% fan and up to 75c.


As you already know. You can mix metals if you want. Just make sure to use the correct coolant and inhibitors. Too many people on here freak out about it. I've had two aluminum engines in my vehicle with a brass/copper rad and heater core with no problems. It's just up to you.
Edited by Rangerscott - 5/14/11 at 6:30am
House heater
(14 items)
 
  
CPUMotherboardGraphicsRAM
Xeon W5580 @ 4GHz Foxconn Bloodrage GTI Zotac GTX 980Ti ArcticStorm 12GB Corsair 2000MHz @ 1444MHz 
Hard DriveOptical DriveCoolingOS
1TB x2 Samsung F3 RAID 0 LG blu-ray burner Corsair H80 Win7 Pro 64-bit 
MonitorMonitorKeyboardPower
3x 23" LG Flatron W2361VG (sexy glossy) Hisense 55" 4k tv Logitech MX5500 Corsair 850w 
CaseMouse
CoolerMaster HAF-X Logitech revolution laser (MX5500 combo) 
  hide details  
Reply
House heater
(14 items)
 
  
CPUMotherboardGraphicsRAM
Xeon W5580 @ 4GHz Foxconn Bloodrage GTI Zotac GTX 980Ti ArcticStorm 12GB Corsair 2000MHz @ 1444MHz 
Hard DriveOptical DriveCoolingOS
1TB x2 Samsung F3 RAID 0 LG blu-ray burner Corsair H80 Win7 Pro 64-bit 
MonitorMonitorKeyboardPower
3x 23" LG Flatron W2361VG (sexy glossy) Hisense 55" 4k tv Logitech MX5500 Corsair 850w 
CaseMouse
CoolerMaster HAF-X Logitech revolution laser (MX5500 combo) 
  hide details  
Reply
post #10752 of 106464
I spent a few hours today and added my spare RX360 to my TJ07. Still needs sleeving and cable management done properly, but not too bad considering no modding was done to the case, its running a 480, 360 and 240 radiator and I'm still trying to bleed the loop.

I need to trim the front bay covers to cover the HD's, the rubber mounting system is blocking thats why no bay covers for now.

Heres some quick random shots.

zv3s0qcx.xch.jpg

xmzlsf4j.y3o.jpg

pxkyfa0j.2l2.jpg

xasw1dyn.hs5.jpg

nfpbxyum.yqk.jpg
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
post #10753 of 106464
Quote:
Originally Posted by motoray;13496859 
Who makes those fans?

http://www.coolink-europe.com/en/categories/23_29.html

Coolink, i've got the 120p Pwm versions
Frozen Acid
(22 items)
 
Downclocked
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600k, 5Ghz Asus P8P67 WS Revolution XFX HD 6970 @ 1000/1475 XFX HD 6970 @ 1000/1475 
RAMHard DriveHard DriveHard Drive
Corsair Vengance 8GB DDR3 Crucial M4 256gb OCz Vertex 3 120gb 8TB 
CoolingCoolingCoolingCooling
Ek Suppreme HF Full Nickel EK FC6970v2 EK FC6970v1 XSPC RX360 (x4) 
OSMonitorKeyboardPower
Microsoft Windows 7 Ultimate Dell U2312HM Filco Majestouch 2 Ninja MX red Silverstone Striver 1500W 
CaseMouseAudioAudio
Case Labs M8 + Pedestal Steelseries Sensei Asus Xonar Essence STX Audio Technica ATH-A900 
CPUMotherboardGraphicsRAM
Intel Q9450 Gigabyte GA-EX38-DS4 Ati Radeon X1650 Pro 3x 2G DDR2 
Hard DriveCoolingOSMonitor
WD 500gb Drive (os) Scythe Mugen 2 Rev.B Windows 7 Phillips 32" tv 
KeyboardPowerCaseMouse
G15 V1 mod. Corsair CX500 Corsair 600T Logitech Performance MX 
  hide details  
Reply
Frozen Acid
(22 items)
 
Downclocked
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600k, 5Ghz Asus P8P67 WS Revolution XFX HD 6970 @ 1000/1475 XFX HD 6970 @ 1000/1475 
RAMHard DriveHard DriveHard Drive
Corsair Vengance 8GB DDR3 Crucial M4 256gb OCz Vertex 3 120gb 8TB 
CoolingCoolingCoolingCooling
Ek Suppreme HF Full Nickel EK FC6970v2 EK FC6970v1 XSPC RX360 (x4) 
OSMonitorKeyboardPower
Microsoft Windows 7 Ultimate Dell U2312HM Filco Majestouch 2 Ninja MX red Silverstone Striver 1500W 
CaseMouseAudioAudio
Case Labs M8 + Pedestal Steelseries Sensei Asus Xonar Essence STX Audio Technica ATH-A900 
CPUMotherboardGraphicsRAM
Intel Q9450 Gigabyte GA-EX38-DS4 Ati Radeon X1650 Pro 3x 2G DDR2 
Hard DriveCoolingOSMonitor
WD 500gb Drive (os) Scythe Mugen 2 Rev.B Windows 7 Phillips 32" tv 
KeyboardPowerCaseMouse
G15 V1 mod. Corsair CX500 Corsair 600T Logitech Performance MX 
  hide details  
Reply
post #10754 of 106464
updated
post #10755 of 106464
My first proper watercooling loop. I seem to have accidentally gotten an orange and blue theme going.

-DSC6033.jpg

-DSC6037.jpg

I'm already thinking about getting another 240 rad or upgrading to a 480. I think i was expecting too much from a 240 rad.
post #10756 of 106464
Quote:
Originally Posted by Boyboyd;13502673 
I'm already thinking about getting another 240 rad or upgrading to a 480. I think i was expecting too much from a 240 rad.

A 240mm rad should be plenty to cool a CPU only loop.
Black Dynamite
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 875K ~ 4.027Ghz(22x183)@1.388v HT on EVGA P55 SLI E655 EVGA GTX 480 SC - [903c/2100m] G.Skill PC17600-(2200Mhz)-CL7-4GB Pi's 
Hard DriveOptical DriveOSMonitor
64GB Corsair C300 (OS)-300GB Vraptor-1TB WD Black Samsung Super Writemaster DVD-R/RW Windows 7 Home Prem. 64 bit 40" Toshiba 1080p HD 
KeyboardPowerCaseMouse
Logitech G15 Corsair TX850W Silverstone TJ09-B Logitech G9x 
Mouse Pad
Rocketfish game pad 
  hide details  
Reply
Black Dynamite
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 875K ~ 4.027Ghz(22x183)@1.388v HT on EVGA P55 SLI E655 EVGA GTX 480 SC - [903c/2100m] G.Skill PC17600-(2200Mhz)-CL7-4GB Pi's 
Hard DriveOptical DriveOSMonitor
64GB Corsair C300 (OS)-300GB Vraptor-1TB WD Black Samsung Super Writemaster DVD-R/RW Windows 7 Home Prem. 64 bit 40" Toshiba 1080p HD 
KeyboardPowerCaseMouse
Logitech G15 Corsair TX850W Silverstone TJ09-B Logitech G9x 
Mouse Pad
Rocketfish game pad 
  hide details  
Reply
post #10757 of 106464
That's what i thought. Especially with 2 delta fans :\

It's just my CPU. And it loads at 68 degrees peak on 5.2GHz with 1.445v. Have you got any tips? I've re-mounted 3 times and they've all been near-perfect each time. I've checked that my pump is working properly, there are no kinks. and i flushed the radiator out before.
post #10758 of 106464
Quote:
Originally Posted by Boyboyd;13502673 
My first proper watercooling loop. I seem to have accidentally gotten an orange and blue theme going.


I'm already thinking about getting another 240 rad or upgrading to a 480. I think i was expecting too much from a 240 rad.

As a rough guide
I have a GTX 480 @ 900mhz
and a 2500k @ 5ghz 1.4v

and with a 360 radiator (gt 360, not as good as an RX360) with silent push pull fans i get:

70c load cpu
55c load gpu
(if both are loaded at the same time)
(Same Wb and pump as you i think)
so a high performance, or even a standard performance ( RX or RS) 360mm radiator will be fine, Two RX240's would be even better..
Main
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Rampage Gene-Z EVGA GTX570 DS G-Skill sniper 8GB 1600Mhz 
Hard DriveCoolingOSMonitor
120Gb SSD + 1tbf3 H70 + typhoon Windows 7 24" Samsung P2450 
PowerCase
600w Modxstream Silverstone Ps07 
  hide details  
Reply
Main
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K Rampage Gene-Z EVGA GTX570 DS G-Skill sniper 8GB 1600Mhz 
Hard DriveCoolingOSMonitor
120Gb SSD + 1tbf3 H70 + typhoon Windows 7 24" Samsung P2450 
PowerCase
600w Modxstream Silverstone Ps07 
  hide details  
Reply
post #10759 of 106464
Quote:
Originally Posted by Boyboyd;13502872 
That's what i thought. Especially with 2 delta fans :\

It's just my CPU. And it loads at 68 degrees peak on 5.2GHz with 1.445v. Have you got any tips? I've re-mounted 3 times and they've all been near-perfect each time. I've checked that my pump is working properly, there are no kinks. and i flushed the radiator out before.

Do the speakers actually work or are they exclusively on computer-stand duty?
post #10760 of 106464
They weren't plugged in, just a fancy stand.

I've removed them now. Just sitting on the desk atm. Someone alerted me to the fact that speakers have powerful magnets in them.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery