Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 1222

post #12211 of 106459
No problem. I'm assuming that the right side of your top card is inlet. What I came up with is the outlet side to go inlet which will cross behind outlet to CPU. Can't shorten that one. But Instead of a T in your Inlet coming off that Swiftech pump, you might look into 3 QD fittings take out some of the excess and run it straight to the Inlet.

When it's time to drain your loop, Disconnect, connect the drain hose and remove that when empty. Reconnect fill and away you go. Is nearly 30 bucks for just the fittings depending on where you buy them but it's a lifetime of less headaches. wink.gif

~Ceadder:drink:
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #12212 of 106459
Quote:
Originally Posted by Ceadderman;14160085 
No problem. I'm assuming that the right side of your top card is inlet. What I came up with is the outlet side to go inlet which will cross behind outlet to CPU. Can't shorten that one. But Instead of a T in your Inlet coming off that Swiftech pump, you might look into 3 QD fittings take out some of the excess and run it straight to the Inlet.

When it's time to drain your loop, Disconnect, connect the drain hose and remove that when empty. Reconnect fill and away you go. Is nearly 30 bucks for just the fittings depending on where you buy them but it's a lifetime of less headaches. wink.gif

~Ceadder:drink:

can u make a little diagram of what ur talking about??
Edited by Opp47 - 7/9/11 at 1:48pm
Clint Beastwood
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 P6T-Deluxe eVGA GTX-280 6GB Kingston Hyperx 1600 DDr3(2GBx3) 
Hard DriveOSMonitorKeyboard
WD 300GB velociraptor (x2) WD 500GB (x2) Win7 64-bit Pro 23" AW2310, 22" ViewSonic, 19" Viewsonic Logitech Mini 
PowerCaseMouseMouse Pad
ToughPower 1000W ATX/EPS Mountain Mods U2UFO Razer Mamba Raider Gaming Surface 
  hide details  
Reply
Clint Beastwood
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 P6T-Deluxe eVGA GTX-280 6GB Kingston Hyperx 1600 DDr3(2GBx3) 
Hard DriveOSMonitorKeyboard
WD 300GB velociraptor (x2) WD 500GB (x2) Win7 64-bit Pro 23" AW2310, 22" ViewSonic, 19" Viewsonic Logitech Mini 
PowerCaseMouseMouse Pad
ToughPower 1000W ATX/EPS Mountain Mods U2UFO Razer Mamba Raider Gaming Surface 
  hide details  
Reply
post #12213 of 106459
Top card

Out - In

Bottom card

Out - In

Top out to Bottom In.

If you're speaking of replacing the T with Quick Disconnects, it's as you have it set up now but without the T. So the Inlet from the Pump gets a QD Connection. Cut hose in Half Compression Connection on one half with another on the other half. Both connect up and no leaks.
Then you have a single piece of Tubing that isn't being used needs to be long enough to drain into a bucket or whatever you plan to use. Apply another half of QD to that piece and keep it in a safe place. The Disconnect that matters the most is the one on the pump side. So you must have 2 of the GPU side to connect to it. Basically your Male end will be on the Pump side and Female end on the Card side.

Simple enough? mellowsmiley.gif

~Ceadder:drink:
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #12214 of 106459
wow so... i just did the math... and at the best price i could find.. the fittings alone, not including any rotaries, will cost me 181.74 laugher.gif
Clint Beastwood
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 P6T-Deluxe eVGA GTX-280 6GB Kingston Hyperx 1600 DDr3(2GBx3) 
Hard DriveOSMonitorKeyboard
WD 300GB velociraptor (x2) WD 500GB (x2) Win7 64-bit Pro 23" AW2310, 22" ViewSonic, 19" Viewsonic Logitech Mini 
PowerCaseMouseMouse Pad
ToughPower 1000W ATX/EPS Mountain Mods U2UFO Razer Mamba Raider Gaming Surface 
  hide details  
Reply
Clint Beastwood
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 P6T-Deluxe eVGA GTX-280 6GB Kingston Hyperx 1600 DDr3(2GBx3) 
Hard DriveOSMonitorKeyboard
WD 300GB velociraptor (x2) WD 500GB (x2) Win7 64-bit Pro 23" AW2310, 22" ViewSonic, 19" Viewsonic Logitech Mini 
PowerCaseMouseMouse Pad
ToughPower 1000W ATX/EPS Mountain Mods U2UFO Razer Mamba Raider Gaming Surface 
  hide details  
Reply
post #12215 of 106459
Quote:
Originally Posted by Ceadderman;14160272 
Top card

Out - In

Bottom card

Out - In

Top out to Bottom In.

If you're speaking of replacing the T with Quick Disconnects, it's as you have it set up now but without the T. So the Inlet from the Pump gets a QD Connection. Cut hose in Half Compression Connection on one half with another on the other half. Both connect up and no leaks.
Then you have a single piece of Tubing that isn't being used needs to be long enough to drain into a bucket or whatever you plan to use. Apply another half of QD to that piece and keep it in a safe place. The Disconnect that matters the most is the one on the pump side. So you must have 2 of the GPU side to connect to it. Basically your Male end will be on the Pump side and Female end on the Card side.

Simple enough? mellowsmiley.gif

~Ceadder:drink:

i think i follow wha ure sayin... ill post pix as soon as parts arrive...
still gotta think about how bad i want compressions on everything.. confused.gif
Clint Beastwood
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 P6T-Deluxe eVGA GTX-280 6GB Kingston Hyperx 1600 DDr3(2GBx3) 
Hard DriveOSMonitorKeyboard
WD 300GB velociraptor (x2) WD 500GB (x2) Win7 64-bit Pro 23" AW2310, 22" ViewSonic, 19" Viewsonic Logitech Mini 
PowerCaseMouseMouse Pad
ToughPower 1000W ATX/EPS Mountain Mods U2UFO Razer Mamba Raider Gaming Surface 
  hide details  
Reply
Clint Beastwood
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-920 P6T-Deluxe eVGA GTX-280 6GB Kingston Hyperx 1600 DDr3(2GBx3) 
Hard DriveOSMonitorKeyboard
WD 300GB velociraptor (x2) WD 500GB (x2) Win7 64-bit Pro 23" AW2310, 22" ViewSonic, 19" Viewsonic Logitech Mini 
PowerCaseMouseMouse Pad
ToughPower 1000W ATX/EPS Mountain Mods U2UFO Razer Mamba Raider Gaming Surface 
  hide details  
Reply
post #12216 of 106459
Quote:
Originally Posted by Opp47;14160286 
wow so... i just did the math... and at the best price i could find.. the fittings alone, not including any rotaries, will cost me 181.74 laugher.gif

Where are you shopping? And how many fittings are we talking about? eh-smiley.gif

6 EK Comp fittings cost me $50
5 ET rotaries cost me $35

Of course this is before shipping but I think you're looking at some gold plate shiz there my friend. wink.gif

Piece meal it. A little here and a little there. Don't replace anything that don't need direct replacement until you're ready to replace it. biggrin.gif

~Ceadder:drink:
Edited by Ceadderman - 7/9/11 at 2:08pm
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #12217 of 106459
in my build i have spend at least 300 on differnt fittings
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
post #12218 of 106459
Quote:
Originally Posted by Ceadderman;14159986 
Looks good Rush, but 2 things.

1st I'm not sure I could live with the Res hanging out over the HDD. Looks cool, but (knock on wood throw salt over should says bread an butter while walking carefully under ladder then genuflects to the east) should it leak? Yeah I'm not sure bout that at all. wink.gif

2nd Would look better if it were all copper instead of Nickel. tongue.gif

biggrin.gif

~Ceadder:drink:

no it would not be better all coper, i dont like coper at all, plus i dont have a non of my block have nickel following off, and its been more then 6 month,
there is some slight damage to the block i bought from WERMAD, but my orignal blocks have 0 issues


and the res on the outside i love cause i hate sidepanels, i want to be able to see and touch all of my components if i need to at ease, plus i have an internal fan controller

and filling the loop is extrmly easy as well as emptinh it cause i can just take it out and not have to worry about any tubing inside when conerning the res
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
post #12219 of 106459
updated

hey Rushmore, I trimmed down your list of posts in the list, you reached the 16 post limit.

edit: PS- I think we should have a throw down to see who really has the sexiest red sneaky.gif what do you say? Open up a poll thread and let the S!@# hit the fan? :-P
post #12220 of 106459
Quote:
Originally Posted by Haze_hellivo;14158548 
dont you mean a 480 rad?!, looks like a 360 to me.

140x3 = 420, pcx2000f does not have any 120mm fan holes anywhere on it unfortunately.
Stormy
(13 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core I5-3570K Gigabyte Z77X-D3H Geforce GTX Titan Geforce GTX Titan 
RAMHard DriveHard DriveOS
Samsung 30nm 16GB Corsair Neutron GTX 120GB Plextor M5P 256GB Win 8 Pro 
MonitorKeyboardPowerCase
Dell U3011 Razer Blackwidow Tournament Edition Coolermaster Silent Pro Platinum 1000W Coolermaster Storm Stryker 
Mouse
Razer Taipan 
  hide details  
Reply
Stormy
(13 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core I5-3570K Gigabyte Z77X-D3H Geforce GTX Titan Geforce GTX Titan 
RAMHard DriveHard DriveOS
Samsung 30nm 16GB Corsair Neutron GTX 120GB Plextor M5P 256GB Win 8 Pro 
MonitorKeyboardPowerCase
Dell U3011 Razer Blackwidow Tournament Edition Coolermaster Silent Pro Platinum 1000W Coolermaster Storm Stryker 
Mouse
Razer Taipan 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery