Quote:
Originally Posted by TwentyCent 
I personally like this test by Bundy.
Although it shows 360 rads, I think you can stil use it to compare 120 rads. As for the fitting, I have no idea, sorry

I personally like this test by Bundy.
Although it shows 360 rads, I think you can stil use it to compare 120 rads. As for the fitting, I have no idea, sorry

Thx for link..
Make's me think of going with a Alphacool NexXxoS UT60 Full Copper 120mm now allthough the EK rad looks better.
Quote:
Originally Posted by wermad 
Well, its got a mounting holes for a 140mm which should allow you to fit it inside. As for the grommet holes lining up, most cases (no pun intended
) don't line up and you have to drill out new holes. The grommets are intended to route water lines outside the case. If you are concerned with mb clearance when putting the 120mm rad inside, go with a slimmer rad like the RS120/EX120 or BI Stealth 120. i was able to fit an RS120 inside with a fan next to a top mounted RS240 in a 690ii. Only issue was fitting clearance, which an extension and a low profile angled fitting fixed 
If you must have the EK120 outside, just loop the tube through the grommets if you aren't looking to cut the case.

Well, its got a mounting holes for a 140mm which should allow you to fit it inside. As for the grommet holes lining up, most cases (no pun intended
) don't line up and you have to drill out new holes. The grommets are intended to route water lines outside the case. If you are concerned with mb clearance when putting the 120mm rad inside, go with a slimmer rad like the RS120/EX120 or BI Stealth 120. i was able to fit an RS120 inside with a fan next to a top mounted RS240 in a 690ii. Only issue was fitting clearance, which an extension and a low profile angled fitting fixed 
If you must have the EK120 outside, just loop the tube through the grommets if you aren't looking to cut the case.
I know it will fit inside easely, it will just look worse..
Because of the MB i dit had to go with a slim rad inside on the top of the case, but inside and outside on the back i could easely go with a 60mm thick rad.
think i should just order one and keep my fingers crossed then.


































