Quote:
Originally Posted by
munnisÂ

so pointless go over 450l/h pump no gaines with bigger pump?
Not necessarily. As was stated it depends on the restrictions and what all you're cooling.
If you have a couple Radiators, GPU, FC, CPU and RAM block with quite a few 90s' , then I would suggest the higher lph flowrate. If you only have one Radiator and CPU with Res I wouldn't spend that much on a pump.
I have two of BMavs pumps in serial which do just fine with 1 as pump and the other as backup for my 360, CPU, FC and Res loop. Current ambient is 23.333c. Load temp is 38c with fans at 100% with 1 pump running.
I just kicked on the 2nd at 100% and will update what I find before the weather heats up.

~Ceadder
