Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 2734

post #27331 of 106735
Due to limitations on my current build I have to use a radiator with a max length of 240mm, so that might not cut it with 120mm fans. What is your guys' experience with say, 92mm fans that usually reach about 211 mm long? What would I see in terms of temps if I run 2x182mm with both the cpu and gpu under water?
post #27332 of 106735
Quote:
Originally Posted by Saurian View Post

Due to limitations on my current build I have to use a radiator with a max length of 240mm, so that might not cut it with 120mm fans. What is your guys' experience with say, 92mm fans that usually reach about 211 mm long? What would I see in terms of temps if I run 2x182mm with both the cpu and gpu under water?

depends which cpu and gpu your going to be cooling
    
CPUMotherboardGraphicsRAM
i5 2500k  Asus P8z77-I Deluxe/wd EVGA GTX 770 4GB SC G.Skill 8GB 
Hard DriveHard DriveCoolingOS
Crucual M500 120GB Crucial MX100 250GB ex120+st30 280 w/ noctua LNA Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell U2713hm  Microsoft POS SilverStone SFX 450w-G Custom 
MouseAudio
TT eSports Black 4000DPI Audio-technica ATH-A900X 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500k  Asus P8z77-I Deluxe/wd EVGA GTX 770 4GB SC G.Skill 8GB 
Hard DriveHard DriveCoolingOS
Crucual M500 120GB Crucial MX100 250GB ex120+st30 280 w/ noctua LNA Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell U2713hm  Microsoft POS SilverStone SFX 450w-G Custom 
MouseAudio
TT eSports Black 4000DPI Audio-technica ATH-A900X 
  hide details  
Reply
post #27333 of 106735
Quote:
Originally Posted by Aleckazee View Post

depends which cpu and gpu your going to be cooling

2600k and a GTX 670.
post #27334 of 106735
I solved mty issues !

I wokre up this morning knowing that it'd bug me all morning not to have solved my pumping issues and decided to give it another shot.
Turns out that the pump is just weaker than I imagined. After like five to ten on and offs of the pump the tube going from the bottom rad to the top reached the top one (water level did) and when switching it off it went back down to halfway. So I kept switching it n and ff and little by little water started filing the top rad untill all off a sudden it sucked the entire reservoir and a second filling of it then galf a third. And the couple blue drops of mayhems that I'd put to see where the coolant was mixed throughout the entire loop instead of previously sitting in the reservoir.
From that point loads of tiny bubbles kept comming up the reservoir. I made sure it was full when I left and let the loop run so that hopefully when I got home it'd be totally bled.

The pump is making a hideous humming noise. I've heard that goes away once the loop is bled. I'm hoping that's true.

This isn't filled with the final coolant as I didn't want to fill it with mayhems blue berry pastel concentrate + blue dye + di water untill I was sure the pump worked.

Thagnks to everybody that helped me make sure my loop's setup was wrong and the reservoir being afyter thpump and a rad in such a complexe/restrictive loop just wouldn't work out.
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
post #27335 of 106735
Quote:
Originally Posted by steelkevin View Post

I solved mty issues !
I wokre up this morning knowing that it'd bug me all morning not to have solved my pumping issues and decided to give it another shot.
Turns out that the pump is just weaker than I imagined. After like five to ten on and offs of the pump the tube going from the bottom rad to the top reached the top one (water level did) and when switching it off it went back down to halfway. So I kept switching it n and ff and little by little water started filing the top rad untill all off a sudden it sucked the entire reservoir and a second filling of it then galf a third. And the couple blue drops of mayhems that I'd put to see where the coolant was mixed throughout the entire loop instead of previously sitting in the reservoir.
From that point loads of tiny bubbles kept comming up the reservoir. I made sure it was full when I left and let the loop run so that hopefully when I got home it'd be totally bled.
The pump is making a hideous humming noise. I've heard that goes away once the loop is bled. I'm hoping that's true.
This isn't filled with the final coolant as I didn't want to fill it with mayhems blue berry pastel concentrate + blue dye + di water untill I was sure the pump worked.
Thagnks to everybody that helped me make sure my loop's setup was wrong and the reservoir being afyter thpump and a rad in such a complexe/restrictive loop just wouldn't work out.

Ive never had that issue and obviously the only thing to watch out for is not running the pump dry but what might help if you have the same issue again would turning the case upside down to let gravity help you bleed the blocks and rads higher than your pump, same as you would for getting rid of bubbles . Glad you got it working for you though , dont forget to post pics once youre done !
    
CPUMotherboardRAMHard Drive
i7 960 Gigabyte GA-X58A-UD3R Socket 1366 Intel X58  Corsair Vengeance 12 GB triple channel 1600 MHZ  Wester Digital Caviar Green  
Optical DriveCoolingOSMonitor
LG GH24NS90 Black  Corsair H100 CPU water cooler  Windows 7 Home Premium LG 23 " LED 3 ms  
KeyboardPowerCaseMouse
Microsoft Wireless  OCZ-ZT750W fully Modular 80-PLus Bronze  NZXT Guardian 921 Blue LED  Microsoft Wireless  
Audio
Bose Companion 3 Series  
  hide details  
Reply
    
CPUMotherboardRAMHard Drive
i7 960 Gigabyte GA-X58A-UD3R Socket 1366 Intel X58  Corsair Vengeance 12 GB triple channel 1600 MHZ  Wester Digital Caviar Green  
Optical DriveCoolingOSMonitor
LG GH24NS90 Black  Corsair H100 CPU water cooler  Windows 7 Home Premium LG 23 " LED 3 ms  
KeyboardPowerCaseMouse
Microsoft Wireless  OCZ-ZT750W fully Modular 80-PLus Bronze  NZXT Guardian 921 Blue LED  Microsoft Wireless  
Audio
Bose Companion 3 Series  
  hide details  
Reply
post #27336 of 106735
Quote:
Originally Posted by Saurian View Post

2600k and a GTX 670.

I think you could get away with it but you won't get great temps and I doubt you would be able to overclock. At the moment I'm running 2500k and gtx 560 ti (all stock) with a single 120mm radiator using noctua fans at medium speed and the highest temp I'm getting under load is low 60s on both cpu and gpu (lower when gaming). The 670 would have more heat output, but then again x2 92mm would have more rad space than a 120mm.

Don't make a decision on my comment, read around and do more research. Like I said, you'll be able to run everything at stock, but I'm not sure about overclocking because that usually has a significant impact on temps.
    
CPUMotherboardGraphicsRAM
i5 2500k  Asus P8z77-I Deluxe/wd EVGA GTX 770 4GB SC G.Skill 8GB 
Hard DriveHard DriveCoolingOS
Crucual M500 120GB Crucial MX100 250GB ex120+st30 280 w/ noctua LNA Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell U2713hm  Microsoft POS SilverStone SFX 450w-G Custom 
MouseAudio
TT eSports Black 4000DPI Audio-technica ATH-A900X 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 2500k  Asus P8z77-I Deluxe/wd EVGA GTX 770 4GB SC G.Skill 8GB 
Hard DriveHard DriveCoolingOS
Crucual M500 120GB Crucial MX100 250GB ex120+st30 280 w/ noctua LNA Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell U2713hm  Microsoft POS SilverStone SFX 450w-G Custom 
MouseAudio
TT eSports Black 4000DPI Audio-technica ATH-A900X 
  hide details  
Reply
post #27337 of 106735
I need some advice on this before I press the go button

REAPER
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4960X 4.5ghz RAMPAGE IV BLACK Edition EVGA GeForce Titan Hydro Copper EVGA GeForce Titan Hydro Copper 
GraphicsRAMHard DriveOptical Drive
EVGA GeForce Titan Hydro Copper 64GB Corsair Dominator Platinum 2133mhz Intel 520 ASUS BluRay 
CoolingCoolingCoolingCooling
Swiftech Apogee HD Aquacomputer Aqualis XT Alphacool NexXxos Monsta Quad 480mm RAD Alphacool NexXxos UT60 480mm RAD 
OSMonitorMonitorMonitor
Windows 8 PRO ROG Swift PG278Q ROG Swift PG278Q ROG Swift PG278Q 
KeyboardPowerCaseMouse
Corsair Vengeance K70  Corsair AX1500i Corsair 900D Cyborg RAT 7 
Mouse PadAudioAudioAudio
Corepad DeskPad XXXXXL BOSE Companion 5 Audio-Technia ATH M50 Audio-Technia AT2020 USB microphone 
  hide details  
Reply
REAPER
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4960X 4.5ghz RAMPAGE IV BLACK Edition EVGA GeForce Titan Hydro Copper EVGA GeForce Titan Hydro Copper 
GraphicsRAMHard DriveOptical Drive
EVGA GeForce Titan Hydro Copper 64GB Corsair Dominator Platinum 2133mhz Intel 520 ASUS BluRay 
CoolingCoolingCoolingCooling
Swiftech Apogee HD Aquacomputer Aqualis XT Alphacool NexXxos Monsta Quad 480mm RAD Alphacool NexXxos UT60 480mm RAD 
OSMonitorMonitorMonitor
Windows 8 PRO ROG Swift PG278Q ROG Swift PG278Q ROG Swift PG278Q 
KeyboardPowerCaseMouse
Corsair Vengeance K70  Corsair AX1500i Corsair 900D Cyborg RAT 7 
Mouse PadAudioAudioAudio
Corepad DeskPad XXXXXL BOSE Companion 5 Audio-Technia ATH M50 Audio-Technia AT2020 USB microphone 
  hide details  
Reply
post #27338 of 106735
I'm no expert but a 360 rad wouldn't even need a single one of those pumps.

At least that's what I think. On my phone can't really tell what's in that loop but that's what it looks like.

Edit: ok... hadn't realized you were getting 15 meters of tubing.
Edited by steelkevin - 9/14/12 at 2:54am
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
post #27339 of 106735
too much money for res/pumps...Get the xspc d5 res/pump combo,it will be more than enough

You will also need some fans
post #27340 of 106735
I already have the FANs... I like that res pump that is the only reason I will get that one.. Money is not really an issue with this one just convincing the wife of the need LOL
REAPER
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4960X 4.5ghz RAMPAGE IV BLACK Edition EVGA GeForce Titan Hydro Copper EVGA GeForce Titan Hydro Copper 
GraphicsRAMHard DriveOptical Drive
EVGA GeForce Titan Hydro Copper 64GB Corsair Dominator Platinum 2133mhz Intel 520 ASUS BluRay 
CoolingCoolingCoolingCooling
Swiftech Apogee HD Aquacomputer Aqualis XT Alphacool NexXxos Monsta Quad 480mm RAD Alphacool NexXxos UT60 480mm RAD 
OSMonitorMonitorMonitor
Windows 8 PRO ROG Swift PG278Q ROG Swift PG278Q ROG Swift PG278Q 
KeyboardPowerCaseMouse
Corsair Vengeance K70  Corsair AX1500i Corsair 900D Cyborg RAT 7 
Mouse PadAudioAudioAudio
Corepad DeskPad XXXXXL BOSE Companion 5 Audio-Technia ATH M50 Audio-Technia AT2020 USB microphone 
  hide details  
Reply
REAPER
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4960X 4.5ghz RAMPAGE IV BLACK Edition EVGA GeForce Titan Hydro Copper EVGA GeForce Titan Hydro Copper 
GraphicsRAMHard DriveOptical Drive
EVGA GeForce Titan Hydro Copper 64GB Corsair Dominator Platinum 2133mhz Intel 520 ASUS BluRay 
CoolingCoolingCoolingCooling
Swiftech Apogee HD Aquacomputer Aqualis XT Alphacool NexXxos Monsta Quad 480mm RAD Alphacool NexXxos UT60 480mm RAD 
OSMonitorMonitorMonitor
Windows 8 PRO ROG Swift PG278Q ROG Swift PG278Q ROG Swift PG278Q 
KeyboardPowerCaseMouse
Corsair Vengeance K70  Corsair AX1500i Corsair 900D Cyborg RAT 7 
Mouse PadAudioAudioAudio
Corepad DeskPad XXXXXL BOSE Companion 5 Audio-Technia ATH M50 Audio-Technia AT2020 USB microphone 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery