Originally Posted by socketus
Hey LuckyNumber13 - hows that psu configureing coming along ? I saw your pix of the 9000 and the 360 in the bottom with your psu sitting rocketship style.
I've got a 9000 and so far trying to put a 480 rad in the top with inside fans is a fail. So I'm wondering what your plan is, coz that definitely will work, but what to
do with the power plug to the psu ? You'd have to shelf it some so it'd stand clear for the ac plug, then you gotta figure out how to hold the psu in place.
Apart from the Arctic Rain evap cooler, there's 1 9000 case showing a rad installed here at OCN, and that's in the Azza club. And its a 240 or 280 bottom rad.
When cyberpowerpc debuted their 9000 case in February, the vid showed a real bright litup 9000 with what appeared to be a very slim 360 uptop with enermax fans on top of the rad in the case !
WIth a left side mobo, there's only 50mm of head room till the expansion slot cage. A narrower rad may fit with inside fans, thats what Im gonna try when my rx360 gets here this week.
PITA to fit rad to this 'case of death' - i'll be watching for your work.
thanx.. yeah the power plug will run underneath ( there
is a gap between bottom where the psu rests and the "actual" bottom of the case which rests
on the desk/ground etc..i will have the power cable running under there to the back.
PSU will be secured down with a few "carefully" placed L brackets
and the RX480 (yeah i'm not going slim ether lol) is going to be on top.
not mounted hanging down but i'm going to build a 2 inch or so added
section to my case on the top which seperates/lifts the top part with power
button and reset etc..to the actual case frame.
all i have to do is drill the same holes that are on my case
to my new "added addition" and it should all fit
my 480 rad will be where the 200mm(i think they
are 200 lol) fans are now and the fans will run underneath
hanging down..i think you probally won't even see the fans
but i'm airbrushing those as well.lol..
check back in a month..Edited by LuckyNumber13 - 9/25/12 at 4:26pm