Quote:
OCN stands for Overkill clockers network. So you're good.
Quote:
Originally Posted by hammerforged 
Been redoing my loop, here are some quick shots I took last night. I will update the build log at some point as well.
Warning: Spoiler! (Click to show)
Been redoing my loop, here are some quick shots I took last night. I will update the build log at some point as well.
Warning: Spoiler! (Click to show)
Looks good.
Quote:
Originally Posted by JohnnyEarsÂ
I've updated mine a bit, dropped the xspc x20 bayres and upped it to a xspc D5 with rpm sense with a Koolance top and a Phobya Ballancer tube res - as well as a re-route, Masterkleer clear u/v blue hose, alphacool elbows and cheap compressions. (plus Mayhems X1)
Things still to do.. resleeve gpu cable (got TIM on 3 wires), fit 90 deg on pump inlet, change drain hose to black and find some edge clips to secure.
Long term.. loose the RASA cpu block and swap for Koolance CPU 370, loose the RS360 and RS240 and swap for Monstas? (overkill, of course, but where theres's tools there's a way lol)
and of course swap fans for ap-15's or similar for push pull. - and loose the u/v.. I'm already tired of the look, so I was thinking Mayhems white pastel in Masterkleer clear hose.
A quick question.. does anyone know if Durelene is available in UK?
bits: Warning: Spoiler! (Click to show)
inside:
drain:
front:
temps after 1 hour of BF3 at 90+ fps with fans on minimum:
I've updated mine a bit, dropped the xspc x20 bayres and upped it to a xspc D5 with rpm sense with a Koolance top and a Phobya Ballancer tube res - as well as a re-route, Masterkleer clear u/v blue hose, alphacool elbows and cheap compressions. (plus Mayhems X1)
Things still to do.. resleeve gpu cable (got TIM on 3 wires), fit 90 deg on pump inlet, change drain hose to black and find some edge clips to secure.
Long term.. loose the RASA cpu block and swap for Koolance CPU 370, loose the RS360 and RS240 and swap for Monstas? (overkill, of course, but where theres's tools there's a way lol)
and of course swap fans for ap-15's or similar for push pull. - and loose the u/v.. I'm already tired of the look, so I was thinking Mayhems white pastel in Masterkleer clear hose.
A quick question.. does anyone know if Durelene is available in UK?
bits: Warning: Spoiler! (Click to show)
inside:
drain:
front:
temps after 1 hour of BF3 at 90+ fps with fans on minimum:
Are you running a dual D5 setup? If so is one of them actually pushing coolant into the drain tube?
I'm sure if you can't get Duralene locally, sidewindercomputers.com could probably get it to you.
Quote:
Originally Posted by HanoverfistÂ
Installed some more LED strips for the sides.. Really helped light up the back of the case..
Warning: Spoiler! (Click to show)
Installed some more LED strips for the sides.. Really helped light up the back of the case..
Warning: Spoiler! (Click to show)
Love it. Which LED strips did you add?
~Ceadder
(for its relative size)
, because someone ordered a serial bridge instead of a parallel 
