Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 3084

post #30831 of 106076
Can people please help me, am I better off having a drainage line from the res. (for aesthetics) or at lowest possible loop point (for practicality)?
Quote:
Originally Posted by ginger_nuts View Post

The res. I have has three ports at the bottom.
One for coolant to the res.
One for res. to the pump.
Should I use the other for a drain port, with a length of tube running to the bottom of my case? Will this make it a hassle to drain? (is about at the half way point in the loop, height wise)
My only other option is to put a T piece in the tube going back to the res., which will be visible and stand out. But this option it will sit as low as I can in my case (loop).
post #30832 of 106076
Quote:
Originally Posted by Hooded View Post

Or you could check out Azza's new case Genisis 9000 Black and Red or White and Blue versions

No full clear window plus i would have to place the case to the left of me just to see inside it lol.

Decent case but i am not impressed but who ever needs a ton of airflow it will work well.
IN WIN 509 Build
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6700k Gigabyte Z170X Ultra Gaming Gigabyte 980 Ti Extreme Gaming G.Skill Ripjaws V DDR4 
Hard DriveHard DriveCoolingOS
Intel 750 NVMe Samsung EVO EK 240 Predator Windows 10 64 Bit 
MonitorKeyboardPowerCase
Asus ROG Swift Corsair Strafe RGB MX Brown IN WIN Classic 750 IN WIN 805 
MouseAudio
Corsair Sabre RGB Corsair SP2500 
  hide details  
Reply
IN WIN 509 Build
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6700k Gigabyte Z170X Ultra Gaming Gigabyte 980 Ti Extreme Gaming G.Skill Ripjaws V DDR4 
Hard DriveHard DriveCoolingOS
Intel 750 NVMe Samsung EVO EK 240 Predator Windows 10 64 Bit 
MonitorKeyboardPowerCase
Asus ROG Swift Corsair Strafe RGB MX Brown IN WIN Classic 750 IN WIN 805 
MouseAudio
Corsair Sabre RGB Corsair SP2500 
  hide details  
Reply
post #30833 of 106076
Quote:
Originally Posted by nyk20z3 View Post


No full clear window plus i would have to place the case to the left of me just to see inside it lol.
Decent case but i am not impressed but who ever needs a ton of airflow it will work well.

 

The entire case revers not just the board LOL the side panels switch as well.

 

How hard is a window mod really?. The NZXT Phanton 820 suffers from the same issue with the window. And the extra cost

Blue Dragon
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-960 Asus P6X58D Premium Sapphire Radeon HD6970 Mushkin Black Line PC1600 
Hard DriveHard DriveOptical DriveCooling
Kingston Hyper-X 120 SSD OCZ Agility3 240 SSD Samsung Bluray/DVD Burner XSPC Raystorm CPU Block 
CoolingCoolingCoolingCooling
EK-FB ASUS X58 P6T Series Full NB/SB Block EK-FC6970 V2 XSPC EX240 XSPC EX360 
CoolingCoolingCoolingCooling
XSPC Dual 5.25" Reservoir for One Laing DDC's S... DAz Mode DDC 3.25 Ice Dragon Coolant XSPC Dominator Memory Block - 4 -slot 
CoolingOSMonitorPower
EK-Mosfet ASUS X58 KIT Windows 7 Ultimate Sony 46" Bravia LCD TV Cooler Master Silent 700 
CaseAudioOther
Cooler Master CM690 II  Sony Bravia Home Theater System G-Vans Legion Fan Controller 4x 30W 
  hide details  
Reply
Blue Dragon
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-960 Asus P6X58D Premium Sapphire Radeon HD6970 Mushkin Black Line PC1600 
Hard DriveHard DriveOptical DriveCooling
Kingston Hyper-X 120 SSD OCZ Agility3 240 SSD Samsung Bluray/DVD Burner XSPC Raystorm CPU Block 
CoolingCoolingCoolingCooling
EK-FB ASUS X58 P6T Series Full NB/SB Block EK-FC6970 V2 XSPC EX240 XSPC EX360 
CoolingCoolingCoolingCooling
XSPC Dual 5.25" Reservoir for One Laing DDC's S... DAz Mode DDC 3.25 Ice Dragon Coolant XSPC Dominator Memory Block - 4 -slot 
CoolingOSMonitorPower
EK-Mosfet ASUS X58 KIT Windows 7 Ultimate Sony 46" Bravia LCD TV Cooler Master Silent 700 
CaseAudioOther
Cooler Master CM690 II  Sony Bravia Home Theater System G-Vans Legion Fan Controller 4x 30W 
  hide details  
Reply
post #30834 of 106076
Quote:
Originally Posted by Hooded View Post

The entire case revers not just the board LOL the side panels switch as well.

How hard is a window mod really?. The NZXT Phanton 820 suffers from the same issue with the window. And the extra cost

Any case that does that is not my taste.

You would have to hack up the entire side of the case just to put a window there which sucks after spending a decent amount of money on it.

You would figure all these huge full towers would be designed mostly for water cooling with a huge clear window to show everything off but after watching the video i was mistaken.

11-517-019-V01?$S300W$

Have fun hacking that up to install a clear window plus all these side panel mesh fan mounts are fail and that was a big complaint on the Corsair C70.
Edited by nyk20z3 - 11/1/12 at 1:42pm
IN WIN 509 Build
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6700k Gigabyte Z170X Ultra Gaming Gigabyte 980 Ti Extreme Gaming G.Skill Ripjaws V DDR4 
Hard DriveHard DriveCoolingOS
Intel 750 NVMe Samsung EVO EK 240 Predator Windows 10 64 Bit 
MonitorKeyboardPowerCase
Asus ROG Swift Corsair Strafe RGB MX Brown IN WIN Classic 750 IN WIN 805 
MouseAudio
Corsair Sabre RGB Corsair SP2500 
  hide details  
Reply
IN WIN 509 Build
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 6700k Gigabyte Z170X Ultra Gaming Gigabyte 980 Ti Extreme Gaming G.Skill Ripjaws V DDR4 
Hard DriveHard DriveCoolingOS
Intel 750 NVMe Samsung EVO EK 240 Predator Windows 10 64 Bit 
MonitorKeyboardPowerCase
Asus ROG Swift Corsair Strafe RGB MX Brown IN WIN Classic 750 IN WIN 805 
MouseAudio
Corsair Sabre RGB Corsair SP2500 
  hide details  
Reply
post #30835 of 106076
Thread Starter 
Quote:
Originally Posted by Willi View Post

please tell me what fittings did you use! I LOVE the black finish on them

I sprayed them,they were black nickel before.
Quote:
Originally Posted by RKTGX95 View Post

where is the detail on how you mounted the triple rad? (WE NEED TO SEE IT, FOR THE SAKE OF WC)

biggrin.gif

I will show you during the final build shots.
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #30836 of 106076

I think if enough people speak up and tell Azza what they want they may well make one with a large window side panel. Or maybe an optional large side window panel..

 

The current trend to to have a lot of air flow for air cooled multi gpu machines. Also revering the board makes sense to have the hotter GPU's above the cooler CPU as heat rises.

 

[quote]Any case that does that is not my taste.[/quote]No speaking for tase.

 

I like the idea of being able to assemble the mainboard with all the blocks, tubing and wiring,  outside of the case. So easy to see what your doing.

Blue Dragon
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-960 Asus P6X58D Premium Sapphire Radeon HD6970 Mushkin Black Line PC1600 
Hard DriveHard DriveOptical DriveCooling
Kingston Hyper-X 120 SSD OCZ Agility3 240 SSD Samsung Bluray/DVD Burner XSPC Raystorm CPU Block 
CoolingCoolingCoolingCooling
EK-FB ASUS X58 P6T Series Full NB/SB Block EK-FC6970 V2 XSPC EX240 XSPC EX360 
CoolingCoolingCoolingCooling
XSPC Dual 5.25" Reservoir for One Laing DDC's S... DAz Mode DDC 3.25 Ice Dragon Coolant XSPC Dominator Memory Block - 4 -slot 
CoolingOSMonitorPower
EK-Mosfet ASUS X58 KIT Windows 7 Ultimate Sony 46" Bravia LCD TV Cooler Master Silent 700 
CaseAudioOther
Cooler Master CM690 II  Sony Bravia Home Theater System G-Vans Legion Fan Controller 4x 30W 
  hide details  
Reply
Blue Dragon
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-960 Asus P6X58D Premium Sapphire Radeon HD6970 Mushkin Black Line PC1600 
Hard DriveHard DriveOptical DriveCooling
Kingston Hyper-X 120 SSD OCZ Agility3 240 SSD Samsung Bluray/DVD Burner XSPC Raystorm CPU Block 
CoolingCoolingCoolingCooling
EK-FB ASUS X58 P6T Series Full NB/SB Block EK-FC6970 V2 XSPC EX240 XSPC EX360 
CoolingCoolingCoolingCooling
XSPC Dual 5.25" Reservoir for One Laing DDC's S... DAz Mode DDC 3.25 Ice Dragon Coolant XSPC Dominator Memory Block - 4 -slot 
CoolingOSMonitorPower
EK-Mosfet ASUS X58 KIT Windows 7 Ultimate Sony 46" Bravia LCD TV Cooler Master Silent 700 
CaseAudioOther
Cooler Master CM690 II  Sony Bravia Home Theater System G-Vans Legion Fan Controller 4x 30W 
  hide details  
Reply
post #30837 of 106076
Quote:
Originally Posted by RKTGX95 View Post

i never doubted the 810's excellence in WC or anything, i am just doubting it would fir because: A) its the non SE (aka FINGER PRINTS!!!) one, and B) lacks some style (a bit plain) IMO for the task. other than that i agree that its the best choice out there. (also, i think you could mount a Monsta 80mm rad with only pull in it)

I agree on the non SE, i have a white one and its better then the black one (have a black phantom), you cannot see the finger prints that easy on white, compared to white.

You can fit a monster with push pull. I wanted to fit a monster in mine, but ended up against it. But I did get 4 rads inside my switch including a 60mm 420 and 45mm 360, so I don't mind not having a monster rad (well I guess, I do mind not having one frown.gif.....).

Picture before mounting the mosfet block. will take some better one over the weekend as hopefully by the sleeving will be done, and the rig up and running.



Quote:
Originally Posted by Hooded View Post


I like the idea of being able to assemble the mainboard with all the blocks, tubing and wiring,  outside of the case. So easy to see what your doing.

I love that idea too, and with that said, I will send an email to Azza to make a case that looks good as the genesis is a very functional case. And I personally love a reversed ATX look (given how my desk is setup, thats the only way I can show off and look inside my rig)
Edited by jassilamba - 11/1/12 at 1:59pm
post #30838 of 106076
Quote:
Originally Posted by Rickles View Post


My pump sucks too much air like that, thus bringing me back to more problems.

Thats not how the res is at all. There are 3 holes in the res, one at the very top to fill with water, and 2 located near the bottom, 1 for pump outlet and another to close to loop.

Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
post #30839 of 106076
Quote:
Originally Posted by B NEGATIVE View Post


biggrin.gif
I will show you during the final build shots.

*takes out a chair, prepares countdown and makes enough popcorn*
Well, i'm waiting tongue.gif

Quote:
Originally Posted by jassilamba View Post

I agree on the non SE, i have a white one and its better then the black one (have a black phantom), you cannot see the finger prints that easy on white, compared to white.
You can fit a monster with push pull. I wanted to fit a monster in mine, but ended up against it. But I did get 4 rads inside my switch including a 60mm 420 and 45mm 360, so I don't mind not having a monster rad (well I guess, I do mind not having one frown.gif.....).

well, i really want to pull off a black with red theme of colour, and many said that the black Non SE is GLOOOOOSY and leaves many fingerprints. ( frown.gif )
other than that, i think i'm on an inner debate of going on the C70 or the non SE 810. Style vs size and capability...
"Black & Red"
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-3570k ASUS Maximus V Formula Sapphire HD 7950 OC 950Mhz Edition G.Skill 16GB (2x8G) 1333Mhz 9-9-9-24 (F3-10666C... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128GB SSD Western Digital Caviar Blue 1TB ASUS DRW-24B3ST DVD Burner Antec Kuhler 920 
PowerCase
Corsair AX 750 Corsair C70 
  hide details  
Reply
"Black & Red"
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-3570k ASUS Maximus V Formula Sapphire HD 7950 OC 950Mhz Edition G.Skill 16GB (2x8G) 1333Mhz 9-9-9-24 (F3-10666C... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 128GB SSD Western Digital Caviar Blue 1TB ASUS DRW-24B3ST DVD Burner Antec Kuhler 920 
PowerCase
Corsair AX 750 Corsair C70 
  hide details  
Reply
post #30840 of 106076
What is the best top to the D5 ? - Really thinking about selling my DDC 10W and get a D5 smile.gif

Is thinking about getting this - EK-D5 X-RES 100 CSQ:

http://www.ekwb.com/shop/ek-d5-x-res-top-100-csq-black-acetal.html



Would be nice to have a res if the performance is still good - But really dont know anything about D5 top/res.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery