Originally Posted by wermad
See post above yours
You can find these very cheap at most hardware stores (try Harbor Freight Tools).
thanks for the suggestion. i would certainly search for one at a hardware store.
Originally Posted by Nic-CM
I'd second this. I've used the DangerDen cutter for a project because it came with the tubing. It works as intended, but it does take quite a bit of pressure to get through the tube. It's also a bit unstable when you're first pressing down. I also had a slip whilst cutting, broke the plastic hinge, and nearly poked myself with that razor blade.
That being said, it wasn't bad to work with. You just need to balance strength and finesse.
thanks for the info, very helpful.
and people say being a PC Enthusiast isn't dangerous
any more suggestions for things a first timer Water Cooler might need? (except the hose cutter)
also, would anyone help me with deciding which block: (to achieve a great glow effect with red coolant)
Originally Posted by RKTGX95
Unfortunately, the ice black (black smoked) acrylic version doesn't have LED holes
(as seen here
So i'd have to choose between the black smoked version without LEDs, The clear acrylic version with LEDs or just settle with the XSPC Raystorm which is equally impressive to the BP blocks.
any suggestions ?