Originally Posted by mironccr345
This is an awesome build. Really like what you did with the cables and the way you routed the tubes. Nice work!
Thanks man. If it wasn't for your YouTube videos, I wouldn't have made the "switch" to my Switch 810 from Corsair. This case is easier to work with than any Corsair case before the 900D.
Originally Posted by strong island 1
yes it was while I was filling. I had been running my loop for about a month and then decided to change the tubing to clear with red coolant. I also added the 400ml res and another rad and changed the entire tube routing. I basically rebuilt the enitre computer and changed everything. I removed all blocks and cleaned them with a tooth brush so I know nothing was stuck in them.
I filled the res and ran the pump until it emptied and then I shut the pump down and repeat the process. I got thru about 2 bottles of coolant and everything filled ok. I emptied the second bottle into the res and started the pump again and it sucked about half the coolant down and thats when it errupted.
Could it have been a big pocket of air was forced into the res and caused this.
To make you feel better, I myself had an accident while going SLI last night, which caused my lower GTX 670 to get bathed in Mayhem's Pastel Blue Berry. I forgot to plug the lower left port on my upper GTX 670 water block. I wiped the case up, disassembled it immediately, cleaned the card and block with an air can and a microfiber towel, re-applied TIM and thermal pads, and slapped it back in. Sorry for your apparent and unexplainable mishap, I just hope everything's okay.Edited by joejoe69 - 5/14/13 at 4:23am