Originally Posted by PCBuilder94
I'm on a crappy 720 monitor and I believe the Haswell IGPU should be strong enough. I'm gettin a 7970 or 9970 with a Qnix Evolution II next month or September. If I have enough money ill get a 780. IDK if ill wc my gpu in such a small case.
If you can buy a 9970 next month or September... (or even the 780/7970 which actually exist
) you had probably better think about getting a decent monitor along with it!
Did you mean 7990 maybe?
Originally Posted by pc-illiterate
OK. Top card is hitting 100-101*c then shutting itself off.
Swiftech uni blocks and swiftech ski bridge. Apparently I didn't get the top blockbled at all. Inlet and outlet on the top. Anyone with some help or advice on bleeding this thing?
Tip/shake the case while pump cycling... but you might want to try remounting that block if bleeding doesn't work almost immediately. If your rig is filled and bled properly (which really should be done during leak-testing without power to the MB+GPUs) then you shouldn't ever see those temps.
Either something is wrong with the loop, block (i.e. mount/TIM), or the card itself. Are those temps at idle?!?!Edited by DiGiCiDAL - 7/7/13 at 5:48pm