MH-K" url="/t/584302/ocn-water-cooling-club-and-picture-gallery/46090#post_20380883"]That sounds pretty spot on there animal.
Correct me if I'm wrong here skyn3t, but your compressions don't look like they are threaded all the way down either?
And if they aren't threaded all the way, you did a pristine job of making sure all the gaps were the same
This is the max tolerance all the way down the more soft the more it get close Im on mobile now so I can't upload a proper pictures
Red Primochill adv lrt Clear is Durelene, the difference is about 1 to 2 mm I would saying 1mm. But if you have a 1/2 x 5/8 with tubing 7/16 x 5/8 you won't even catch the tread. This why I sold my both 1/2 x 5/8
Originally Posted by animal0307
Those look more than fine to me. I don't think you will ever be able to get the compression ring to screw "all the way down" when there is a hose in there. If you aren't, grab it and try pulling it out. or just run your pump through a couple loops of hose and fittings to give it a leak test but to me that looks just fine.
I totally agree with you.Edited by skyn3t - 7/11/13 at 3:58am