Originally Posted by Clockwerk
Originally Posted by ChaosAD
I know that it sounds like a total noob question, but i use the term "best" for the rad ans fans as a combination. I think that i cant fit 140mm fans at the bottom of the TJ07 thats why i chose the 480. But also i didnt know that i can fit a 480 monsta in there. Can i really fit it with the psu in place? But with the monsta i ll also need push/pull right? Are you happy with 4xAP only? Is it better to get UT60 480 with 4xAP15, Monsta 480 with 4xAP15 or Monsta 480 with 8xsome cheaper also good performing but not noisy fans (is there space for this)?
I don't think that there will be space for push/pull with either monsta or UT60 480mm rad down there. Pretty sure you cannot fit a fan between the psu/radiator without moving the psu over. I currently have a UT60 480 and a 240mm Black Ice compact radiator in the bottom. You could fit a 3.140 mm radiator in the bottom if you really wanted as long as you don't use a radiator mount or anything it would be a really tight fit. UT60 is a great rad though and one of the top performers except at 600 rpms. UT60 with Ap-15s would be a really nice setup.
Nice radiator comparison at variety of fan speeds if you haven't seen it already.
Check my build log, I'm running a 480 Monsta, but it requires moving the psu over. A push-pull fan arrangement isn't necessary for a Monsta rad.
As I mentioned previously, an Alphacool 480 Monsta 480 works fine with an AP-15 push arrangement just fine.
I recommend a UT-60 however, with a TJ07, unless you are willing to move the psu. Having done that, it works great.Edited by DerComissar - 8/17/13 at 9:36pm