Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 6519

post #65181 of 106449
Quote:
Originally Posted by 15goudreau View Post

If you are still planning on using your fill port as an inlet on the x3 res you are going to run into some issues, unless you are keeping the thing full 24/7. You either need to buy the multiport top with the special downtube from EK or you can make it work with a threaded acrylic tube a male to male fitting and doubling up on o-rings. If you want to know how to do the latter send me a PM thumb.gif.

Ordered the multiport top as well as downtubes and a alpha cool bubble down adapter piece.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #65182 of 106449
Quote:
Originally Posted by B NEGATIVE View Post

Quote:
Originally Posted by tecuarenta View Post

Are push/push or pull/pull double fan configs any good?
Just saw a rig with two fans at the same side of the radiator kookoo.gif...

It is a sure fire way of doubling the static pressure,very common in the dark days of stock coolers and no real aftermarket.

Hmmm, Martin did some pull-pull and push-push testing on a rad and wrote:
Quote:
None of the experimental pull/pull or push/push configurations provided any noteworthy benefit as it seams the air is simply too disturbed from the first fan to allow the second to perform properly when air is moving.
post #65183 of 106449
Quote:
Originally Posted by Angrychair View Post

oh man that website is hilariously painful.
This is the WC store here: http://www.gamertek.cl
Toretto
(18 items)
 
F2004
(38 items)
 
 
  hide details  
Reply
Toretto
(18 items)
 
F2004
(38 items)
 
 
  hide details  
Reply
post #65184 of 106449
Speaking of push pull, is it a viable option for someone who wants almost dead silence?
Obviously using sub 800 RPM fans, probably a thin radiator.

Would it be better to have a thin radiator with push/pull or thicker one with one set of fans?
Main Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K MSI Z77 Mpower Asus GTX 980 8Gb Mushkin Redline 2133mhz 
Hard DriveHard DriveOptical DriveCooling
Intel 520 120gb WD Green 1tb slim slot load drive Noctua NHD14 
OSMonitorKeyboardCase
Windows 7 Ultimate QNIX Qx2710 @ 96hz Ducky Shine 3, MX Blacks, Magenta Silverstone RV04 
MouseMouse PadAudioAudio
Mionix Castor Glorious XXL Extended Mouse Mat AudioTechnica AD900 Xonar DSX 
AudioOther
Antlion ModMic 4.0 Vortex Doubleshot Backlit Keycaps 
  hide details  
Reply
Main Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570K MSI Z77 Mpower Asus GTX 980 8Gb Mushkin Redline 2133mhz 
Hard DriveHard DriveOptical DriveCooling
Intel 520 120gb WD Green 1tb slim slot load drive Noctua NHD14 
OSMonitorKeyboardCase
Windows 7 Ultimate QNIX Qx2710 @ 96hz Ducky Shine 3, MX Blacks, Magenta Silverstone RV04 
MouseMouse PadAudioAudio
Mionix Castor Glorious XXL Extended Mouse Mat AudioTechnica AD900 Xonar DSX 
AudioOther
Antlion ModMic 4.0 Vortex Doubleshot Backlit Keycaps 
  hide details  
Reply
post #65185 of 106449

Push pull with decent fans will always be quieter because you can run them at lower rpm's and still get good static pressure

 

Push pull on a thinner rad also provides better cooling than push on a thicker rad. Obviously push/pull on a thick rad is best.

    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
4930k Rampage IV Black Edition w/EK Clean CSQ Block PowerColor 290x BF4 (2 More Coming) G Skill Trident X 
Optical DriveCoolingCoolingCooling
Silverstone Slotload Bluray Burner EK Supremacy Clean CSQ Alphacool XT45 360 XSPC EX360 
CoolingCoolingCoolingCooling
Alphacool ST30 240 3 x Phobya NB E-Loops (1600RPM) Alphacool UT60 120 (White Edition) 7 x Gentle Typhoon AP-00 (2150) 
CoolingCoolingCoolingCooling
3 x Gentle Typhoon AP-15 6 x Phobya G1/4 Inline Temp Sensor Coupler (2 P... Aquacomputer G1/4 High Flow Meter Swiftech MCP35x 
CoolingOSPowerCase
XSPC Photon 170 Reservoir Windows 7 + Linux Antec HCP-1300 Platinum CoolerMaster HAF XB (Modded) 
OtherOtherOtherOther
Silverstone FP58 Thermaltake Max 5 Duo Phobya 6 x 16mm Vandal Switch Plate  6 x 16mm Vandal Switches (ModSmart & Lamptron) 
OtherOther
LC Telios Red/Black Fusion, White, & Gray More To Come... 
  hide details  
Reply
post #65186 of 106449
Quote:
Originally Posted by Pimphare View Post

If you live in the U.S. try Lowes or Home Depot or whatever hardware store you may live near.

Unfortunately I do not live in the US right now. Possibly next year this time, but I am in South Korea for at least 10 more months.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #65187 of 106449
Anyone here try the asus 780 poseiden?
post #65188 of 106449
Quote:
Originally Posted by pc-illiterate View Post

are you actually running that ddc upside down? if your main ddc dies so will that ddc. i would say you shouldnt be running it upside down as everyone else says BUT, your main should keep it full of coolant. that still doesnt mean you should be running it like that. if your main is a 35x, you dont even really need that 2nd pump. nice as a backup but wont do anything but die if its needed.

The only purpose of the second pump was for assisting the main. I ran into the issue that the first purchase. P going through 4 radiators and the gpus/cpu , that it always had micro bubbles and I couldn't get the system to completely clear. Now my Temps are down. Could I run them in series and get good pressure? I could order another EK res X3 and make a bracket at the front of the case and run dual Res.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #65189 of 106449
Thread Starter 
Quote:
Originally Posted by Unicr0nhunter View Post

Quote:
Originally Posted by B NEGATIVE View Post

Quote:
Originally Posted by tecuarenta View Post

Are push/push or pull/pull double fan configs any good?
Just saw a rig with two fans at the same side of the radiator kookoo.gif...

It is a sure fire way of doubling the static pressure,very common in the dark days of stock coolers and no real aftermarket.

Hmmm, Martin did some pull-pull and push-push testing on a rad and wrote:
Quote:
None of the experimental pull/pull or push/push configurations provided any noteworthy benefit as it seams the air is simply too disturbed from the first fan to allow the second to perform properly when air is moving.

People do take Martins word as gospel but in this instance,he is incorrect. Google stacked fans,there are many examples of this working. Stacked will double static pressure,side by side feeding the same rad doubles airflow. All Martin proved is static pressure is not the be all-end all that people seem to think it is. In an application where pressure is the focus,it works very well.
Edited by B NEGATIVE - 4/1/14 at 11:29pm
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #65190 of 106449
Out of all of these which one is the best?
http://mdcomputers.in/products/cpu-cooler/cooler-master-liquid-cooler-nepton-280l.html
http://mdcomputers.in/products/cpu-cooler/cooler-master-liquid-cooler-seidon-240-m.html
http://mdcomputers.in/products/cpu-cooler/corsair-cpu-cooler-h110.html?sort=p.price&order=DESC
http://mdcomputers.in/products/cpu-cooler/corsair-cpu-cooler-h100i.html?sort=p.price&order=DESC

By how much will the best among these lower temps over what I have now?
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
Jay
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX 8350 4.4Ghz at 1.36v GA 78LMT USB3 Rev 5.0 Sapphire R9 285 OC 16GB Kingston Savage Ram 
Hard DriveHard DriveCoolingOS
1TB Western Digital 500GB Seagate Barracuda Noctua NH-D15S Windows 8.1 
MonitorPowerMouseMouse Pad
Asus MG279Q Fressync OCZ ZS 650 Watt PSU Dragonwar ELE-G9 Dragonwar 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery