Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 9528

post #95271 of 107104
Quote:
Originally Posted by Benjiw View Post

I think a radiator box would be the best use of your rads and time, unless the other case is housing loads of HDDs etc for a NAS storage solution? Will you be doing a build log on this or something I can keep an eye on? It sounds interesting.

Yes I will be. If you subscribe to my The Lucky Eight build log, it'll be announced in there and a link to where it will be.

No, I already have all the radiators, I just need the clean look of a new case and the ability to hard line a whole case like the 810, is daunting. So I've kept it simple as using this method I need 2 straight runs of hard line, as opposed to 8 or more complex ones if the whole 810 were to be done.
     
CPUMotherboardGraphicsRAM
Intel Core i7 3820 @ 4.3GHz ASUS Rampage IV Formula X79 EVGA GTX 980 Ti Hybrid @ 1.45GHz/1.9GHz Corsair Dominator 16gb @ 2.2GHz C9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 850 EVO 250GB WD Caviar Blue 1tb 7200RPM WD Caviar Blue 1tb 7200RPM WD Caviar Blue 500gb 7200RPM 
CoolingOSMonitorKeyboard
120.5 Custom Loop Windows 10 Pro x64 LG D2343P-BN 3D Monitor @ 70Hz Corsair K70 (MX Brown) 
PowerCaseMouseAudio
Corsair AX Series 850w NZXT Switch 810 Black (Heavily Modded) Logitech G502 Proteus Spectrum Sennheiser HD 598 Cs 
CPUMotherboardGraphicsRAM
AMD FX-6300 @ 4.5Ghz Gigabyte 970A UD3 AMD HD8490 (OEM) @ 1.1Ghz Core/Mem Patriot Viper Xtreme 8gb @1600MHz 8-8-8-24 
Optical DriveCoolingCoolingOS
LiteOn Bluray Player Corsair Hydro Series H100i Zalman 120mm Led Fans x4 Windows 10 Pro x64 
MonitorKeyboardPowerCase
Hitachi 24" 70Hz Monitor Logitech EX110 OCZ ZT 550w Full Modular Zalman Z9 Plus 
MouseAudioOther
DELL Wireless Mouse Logitech 5.1 Sound System TP-Link TL-WN781ND Wireless Card 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i7 3820 @ 4.3GHz ASUS Rampage IV Formula X79 EVGA GTX 980 Ti Hybrid @ 1.45GHz/1.9GHz Corsair Dominator 16gb @ 2.2GHz C9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 850 EVO 250GB WD Caviar Blue 1tb 7200RPM WD Caviar Blue 1tb 7200RPM WD Caviar Blue 500gb 7200RPM 
CoolingOSMonitorKeyboard
120.5 Custom Loop Windows 10 Pro x64 LG D2343P-BN 3D Monitor @ 70Hz Corsair K70 (MX Brown) 
PowerCaseMouseAudio
Corsair AX Series 850w NZXT Switch 810 Black (Heavily Modded) Logitech G502 Proteus Spectrum Sennheiser HD 598 Cs 
CPUMotherboardGraphicsRAM
AMD FX-6300 @ 4.5Ghz Gigabyte 970A UD3 AMD HD8490 (OEM) @ 1.1Ghz Core/Mem Patriot Viper Xtreme 8gb @1600MHz 8-8-8-24 
Optical DriveCoolingCoolingOS
LiteOn Bluray Player Corsair Hydro Series H100i Zalman 120mm Led Fans x4 Windows 10 Pro x64 
MonitorKeyboardPowerCase
Hitachi 24" 70Hz Monitor Logitech EX110 OCZ ZT 550w Full Modular Zalman Z9 Plus 
MouseAudioOther
DELL Wireless Mouse Logitech 5.1 Sound System TP-Link TL-WN781ND Wireless Card 
  hide details  
Reply
post #95272 of 107104
Quote:
Originally Posted by orbitalwalsh View Post

Warning: Spoiler! (Click to show)



I hope you go up for mod of the month. That is just nice looking, even if the CPU is air cooled. thumb.gif
     
CPUMotherboardGraphicsGraphics
5960X Gigabyte X99-UD3P GTX 1080Ti FTW3 (soon) GTX 1080 Ti SC (soon) 
RAMHard DriveHard DriveHard Drive
GSkill TridentZ 32GB 3200MHz Samsung 840 Pro 256GB Crucial m4 512GB Seagate Barracuda 3TB 
CoolingCoolingCoolingCooling
EK EVO Monsoon Premium Bay Res v.2/ Vero D5 pump insta... HWLab Black Ice 360/ 3x eLoops in Push/Pull Phobya 200/ Cooler Master Mega Flow Fan in Push 
OSMonitorKeyboardPower
Windows 7 Ultimate 64-bit Overlord 1440P Corsair K70 Vengeance Corsair AX1200W 
CaseMouse
Cooler Master Haf X Modded Logitech G500s 
CPUGraphicsGraphicsHard Drive
1900X (soon) GTX960 FTW @ 1552MHz / Stock volts GTX1070 SC Intel SSD 
CoolingCoolingOSPower
Corsair H60 Corsair H55/Kraken G10 on GTX960 Mint Mate 18 Corsair AX1200i 
Case
Fractal Define S 
CPUOSCase
Intel Core i3 Ubuntu 14.04LTS Toshiba Satellite Ultrabook 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
5960X Gigabyte X99-UD3P GTX 1080Ti FTW3 (soon) GTX 1080 Ti SC (soon) 
RAMHard DriveHard DriveHard Drive
GSkill TridentZ 32GB 3200MHz Samsung 840 Pro 256GB Crucial m4 512GB Seagate Barracuda 3TB 
CoolingCoolingCoolingCooling
EK EVO Monsoon Premium Bay Res v.2/ Vero D5 pump insta... HWLab Black Ice 360/ 3x eLoops in Push/Pull Phobya 200/ Cooler Master Mega Flow Fan in Push 
OSMonitorKeyboardPower
Windows 7 Ultimate 64-bit Overlord 1440P Corsair K70 Vengeance Corsair AX1200W 
CaseMouse
Cooler Master Haf X Modded Logitech G500s 
CPUGraphicsGraphicsHard Drive
1900X (soon) GTX960 FTW @ 1552MHz / Stock volts GTX1070 SC Intel SSD 
CoolingCoolingOSPower
Corsair H60 Corsair H55/Kraken G10 on GTX960 Mint Mate 18 Corsair AX1200i 
Case
Fractal Define S 
CPUOSCase
Intel Core i3 Ubuntu 14.04LTS Toshiba Satellite Ultrabook 
  hide details  
Reply
post #95273 of 107104
Are these fittings tight enough or should they be tighter?





Anyone have tips of tightening fittings? My thumbs already sore and I barely started.
post #95274 of 107104
Quote:
Originally Posted by Revan654 View Post

Are these fittings tight enough or should they be tighter?
Warning: Spoiler! (Click to show)



Anyone have tips of tightening fittings? My thumbs already sore and I barely started.

Get some low profile working gloves.


Edited by brazilianloser - 2/27/16 at 7:21pm
The MJ Project
(27 items)
 
Plexonator
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7-5820k MSI X99S Krait EVGA 980 Ti SC Corsair Dominator Platinum 16GB DDR4 2666 
Hard DriveHard DriveHard DriveHard Drive
Samsung 850 EVO Samsung 840 EVO Western Digital 1TB Black Western Digital 1 TB Black 
CoolingCoolingCoolingCooling
XSPC AX360 Primochill Revolver Fittings Primochill PETG Tubing Clear Alphacool Pump 
CoolingCoolingCoolingCooling
XSPC AX240 XSPC Raystorm Pro White XSPC Razor 980/980Ti Block Corsair SP120 Quiet Edition 
CoolingOSMonitorKeyboard
Bitspower Water Tank Z-Multi 150 Windows 10 Home Asus PB278Q Corsair K70 RGB 
PowerCaseMouseMouse Pad
EVGA 1000w P2 Fractal Design Define S Logitech G602 Glorious PC Gaming Race Extended Black 
AudioAudioAudio
Schiit Modi 2 JBL LSR305 White Schiit Magni 2 
CPUMotherboardRAMHard Drive
Intel Pentium G4400 3.3GHz Dual-Core Processor Asus H170I-Plus D3 Mini ITX LGA1151 Kingston HyperX Fury Black 8GB (2x4GB) DDR3-1600 Kingston HyperX 3K 120GB 2.5" Solid State Drive 
Hard DriveCoolingOSKeyboard
Western Digital Red 3TB 3.5" 5400RPM Cooler Master Hyper 212 EVO Microsoft Windows 10 Logitech K800 
PowerCase
Corsair CSM 450W 80+ Gold Fractal Design Node 304 Mini ITX 
  hide details  
Reply
The MJ Project
(27 items)
 
Plexonator
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7-5820k MSI X99S Krait EVGA 980 Ti SC Corsair Dominator Platinum 16GB DDR4 2666 
Hard DriveHard DriveHard DriveHard Drive
Samsung 850 EVO Samsung 840 EVO Western Digital 1TB Black Western Digital 1 TB Black 
CoolingCoolingCoolingCooling
XSPC AX360 Primochill Revolver Fittings Primochill PETG Tubing Clear Alphacool Pump 
CoolingCoolingCoolingCooling
XSPC AX240 XSPC Raystorm Pro White XSPC Razor 980/980Ti Block Corsair SP120 Quiet Edition 
CoolingOSMonitorKeyboard
Bitspower Water Tank Z-Multi 150 Windows 10 Home Asus PB278Q Corsair K70 RGB 
PowerCaseMouseMouse Pad
EVGA 1000w P2 Fractal Design Define S Logitech G602 Glorious PC Gaming Race Extended Black 
AudioAudioAudio
Schiit Modi 2 JBL LSR305 White Schiit Magni 2 
CPUMotherboardRAMHard Drive
Intel Pentium G4400 3.3GHz Dual-Core Processor Asus H170I-Plus D3 Mini ITX LGA1151 Kingston HyperX Fury Black 8GB (2x4GB) DDR3-1600 Kingston HyperX 3K 120GB 2.5" Solid State Drive 
Hard DriveCoolingOSKeyboard
Western Digital Red 3TB 3.5" 5400RPM Cooler Master Hyper 212 EVO Microsoft Windows 10 Logitech K800 
PowerCase
Corsair CSM 450W 80+ Gold Fractal Design Node 304 Mini ITX 
  hide details  
Reply
post #95275 of 107104
Quote:
Originally Posted by Revan654 View Post

Are these fittings tight enough or should they be tighter?

Anyone have tips of tightening fittings? My thumbs already sore and I barely started.

Those look tight enough to me. You will always have a gap on compression fittings because of the tubing. Also, don't use any tools, just hand tight or they could compress to much and leak by ruining the lower o rings. I'm sure someone else will chime in though. The best way to check is perform a leak test.
    
CPUMotherboardGraphicsRAM
Intel Core-I5 7600K ASUS ROG Maximus VIII Formula ASUS GTX 1080 Strix OC Corsair Dominator Platinum DDR4 16GB 3000Mhz C15 
Hard DriveHard DriveHard DriveCooling
Samsung 850 Evo SSD 250GB (OS) WD Cavier Black 1TB (Data) WD Velociraptor 150GB (Flight Sim) EK-Supremacy EVO CPU Water Block - Nickel 
CoolingOSMonitorKeyboard
EK-FC1080 GTX Strix - Nickel Windows 10 64-Bit LG 34UM68-P 34" 21:9 UltraWide Full HD IPS LED WASD Custom Mechanical w/ Cherry MX Blues 
PowerCaseMouseMouse Pad
CoolerMaster V1200 Platinum Thermaltake View 27 Logitech G602 Logitech G440 
AudioOtherOtherOther
Bose Companion 3 Series II Saitek Pro Flight Yoke / Throttle Quadrant  Saitek Pro Flight Rudder Pedals Saitek X52 Flight System 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core-I5 7600K ASUS ROG Maximus VIII Formula ASUS GTX 1080 Strix OC Corsair Dominator Platinum DDR4 16GB 3000Mhz C15 
Hard DriveHard DriveHard DriveCooling
Samsung 850 Evo SSD 250GB (OS) WD Cavier Black 1TB (Data) WD Velociraptor 150GB (Flight Sim) EK-Supremacy EVO CPU Water Block - Nickel 
CoolingOSMonitorKeyboard
EK-FC1080 GTX Strix - Nickel Windows 10 64-Bit LG 34UM68-P 34" 21:9 UltraWide Full HD IPS LED WASD Custom Mechanical w/ Cherry MX Blues 
PowerCaseMouseMouse Pad
CoolerMaster V1200 Platinum Thermaltake View 27 Logitech G602 Logitech G440 
AudioOtherOtherOther
Bose Companion 3 Series II Saitek Pro Flight Yoke / Throttle Quadrant  Saitek Pro Flight Rudder Pedals Saitek X52 Flight System 
  hide details  
Reply
post #95276 of 107104
Quote:
Originally Posted by Revan654 
Anyone have tips of tightening fittings? My thumbs already sore and I barely started.

Remember that the collar is there to simply hold the tube on preventing it from popping off. It does not have any bearing on how well the tubing seals.

The barb itself is what seals against the tubing not the collar.

As long as it is tight enough to prevent the tubing from pulling off then that is all you require. Finger tight is usually all you require and the gap you show is quite normal (it will vary with tubing wall thickness variations).

Below is one of my Bitspower compressions with Advanced LRT tubing - Note the gap yet you cannot pull the tubing off...!

Edited by Costas - 2/27/16 at 8:29pm
Corsair 900D
(12 items)
 
Déjà vu
(16 items)
 
 
CPUMotherboardGraphicsGraphics
I7-6700K ASUS Maximus VIII Formula EVGA 980Ti Classified EVGA 980Ti Classified 
RAMHard DriveHard DriveCooling
Corsair CMD32GX4M4B3200C16 Samsung 512GB 950 Pro M2 Samsung 1TB 850 Pro Custom 
OSMonitorKeyboardPower
Win 10 ASUS PG278Q Corsair K70 RGB Corsair AX1500i 
CaseMouseAudioOther
Caselabs SMA8 Razer Deathadder 2013 On-Board Aquacomputer Aquaero 6XT 
  hide details  
Reply
Corsair 900D
(12 items)
 
Déjà vu
(16 items)
 
 
CPUMotherboardGraphicsGraphics
I7-6700K ASUS Maximus VIII Formula EVGA 980Ti Classified EVGA 980Ti Classified 
RAMHard DriveHard DriveCooling
Corsair CMD32GX4M4B3200C16 Samsung 512GB 950 Pro M2 Samsung 1TB 850 Pro Custom 
OSMonitorKeyboardPower
Win 10 ASUS PG278Q Corsair K70 RGB Corsair AX1500i 
CaseMouseAudioOther
Caselabs SMA8 Razer Deathadder 2013 On-Board Aquacomputer Aquaero 6XT 
  hide details  
Reply
post #95277 of 107104
I got a question for you guys.

Seeing there's some GPU all in one cooling coming out now and we have heaps of good CPU all in ones out, how would a pc with a custom loop vs all in one fair when cooling a single CPU & GPU?

(I also mean in a fair test, 480mm rad total for both no extra unnecessary crap like motherboard and RAM and no stupid thick 60mm rads for the custom.)
Humble SM5 MK2
(22 items)
 
Games Server
(12 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1800X MSI B350M Mortar Arctic MSI GTX 1070 ARMOR OC G.Skill Trident Z F4-3200C14D-32GTZKW 32GB 
Hard DriveHard DriveHard DriveCooling
Samsung 960 EVO NVMe M.2 250GB Samsung 850 EVO 1TB Western Digital Blue WD10EZEX 1TB Corsair ML120 Pro x5 
CoolingOSMonitorMonitor
Corsair H100i V2 Windows 10 Enterprise 2016 LTSB 64-Bit Dell U2414H Dell U2414H 
MonitorKeyboardPowerCase
Asus VG248QE WASD CODE 87-Key - Cherry MX Clear EVGA Supernova G2 850W CaseLabs SM5 
MouseMouse PadAudioAudio
Zowie FK1 Artisan ZERO MID Black Large Mouse Pad JDS Labs Element Sennheiser HD 599 
AudioAudio
Samson Q2U Swan M50W Powered 2.1 System 
CPUMotherboardRAMRAM
Intel Xeon E3 1245 V5 MSI C236M Workstation Crucial CT8G4WFD8213 8GB DDR4 ECC 2133MHz Crucial CT8G4WFD8213 8GB DDR4 ECC 2133MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 750 EVO 120GB SSD  Samsung 750 EVO 120GB SSD  Western Digital WD Red 2TB WD20EFRX Corsair H80i V2 
OSPowerCase
Windows 10 Enterprise Corsair VS350 ATX Power Supply Fractal Design Core 1000 
MotherboardRAMHard DriveHard Drive
SUPERMICRO MBD-A1SRi-2758F-O ITX server board Kingston KVR16LSE11/8KF 16GB Samsung 850 EVO 120GB Western Digital RED 4TB x8 
CoolingCoolingCoolingOS
Noctua 120mm NF-F12 2000RPM Noctua 120mm NF-F12 2000RPM Noctua 120mm NF-F12 2000RPM FreeNAS 
PowerCaseOtherOther
Corsair CS550M Caselabs X2M ICY BOX 4bay hotswap IB-544SSK ICY BOX 4bay hotswap IB-544SSK 
OtherOther
LSI MegaRAID 9240-8i  StarTech Model SAS8087S450 SAS to SATA cable's 
  hide details  
Reply
Humble SM5 MK2
(22 items)
 
Games Server
(12 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1800X MSI B350M Mortar Arctic MSI GTX 1070 ARMOR OC G.Skill Trident Z F4-3200C14D-32GTZKW 32GB 
Hard DriveHard DriveHard DriveCooling
Samsung 960 EVO NVMe M.2 250GB Samsung 850 EVO 1TB Western Digital Blue WD10EZEX 1TB Corsair ML120 Pro x5 
CoolingOSMonitorMonitor
Corsair H100i V2 Windows 10 Enterprise 2016 LTSB 64-Bit Dell U2414H Dell U2414H 
MonitorKeyboardPowerCase
Asus VG248QE WASD CODE 87-Key - Cherry MX Clear EVGA Supernova G2 850W CaseLabs SM5 
MouseMouse PadAudioAudio
Zowie FK1 Artisan ZERO MID Black Large Mouse Pad JDS Labs Element Sennheiser HD 599 
AudioAudio
Samson Q2U Swan M50W Powered 2.1 System 
CPUMotherboardRAMRAM
Intel Xeon E3 1245 V5 MSI C236M Workstation Crucial CT8G4WFD8213 8GB DDR4 ECC 2133MHz Crucial CT8G4WFD8213 8GB DDR4 ECC 2133MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 750 EVO 120GB SSD  Samsung 750 EVO 120GB SSD  Western Digital WD Red 2TB WD20EFRX Corsair H80i V2 
OSPowerCase
Windows 10 Enterprise Corsair VS350 ATX Power Supply Fractal Design Core 1000 
MotherboardRAMHard DriveHard Drive
SUPERMICRO MBD-A1SRi-2758F-O ITX server board Kingston KVR16LSE11/8KF 16GB Samsung 850 EVO 120GB Western Digital RED 4TB x8 
CoolingCoolingCoolingOS
Noctua 120mm NF-F12 2000RPM Noctua 120mm NF-F12 2000RPM Noctua 120mm NF-F12 2000RPM FreeNAS 
PowerCaseOtherOther
Corsair CS550M Caselabs X2M ICY BOX 4bay hotswap IB-544SSK ICY BOX 4bay hotswap IB-544SSK 
OtherOther
LSI MegaRAID 9240-8i  StarTech Model SAS8087S450 SAS to SATA cable's 
  hide details  
Reply
post #95278 of 107104
Quote:
Originally Posted by Ithanul View Post

I hope you go up for mod of the month. That is just nice looking, even if the CPU is air cooled. thumb.gif

Thank, air cooler was for looks but not doong so bad @ 4.6ghz

Didnt know there was a mod of the month haha
post #95279 of 107104
Quote:
Originally Posted by orbitalwalsh View Post




Ugh, that is siiiick. I love the air cooler with the swiftech on the GPU's. Ever thought about hitting that swiftech with white plasti-dip?
Fantomex
(27 items)
 
Atlas
(20 items)
 
 
  hide details  
Reply
Fantomex
(27 items)
 
Atlas
(20 items)
 
 
  hide details  
Reply
post #95280 of 107104
Careful turning those comp fittings too tight as the ring can start cutting into the soft tube. Doesn't happen all the time but it could. Turning by hand as best as you can is usually enough and just expect gaps with the thicker tube wall.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery