Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 9536

post #95351 of 107102
Sure, why not thumb.gif. Maybe once in a while add "modification" of the week to recognize very unique specific/singular wc mods without really putting too much emphasis on the builder/owner and the entire build (less analysis). That way individual unique achievements have a chance to be recognized for being special and might give others ideas/inspiration.
post #95352 of 107102
Thread Starter 
Quote:
Originally Posted by wermad View Post

Sure, why not thumb.gif. Maybe once in a while add "modification" of the week to recognize very unique specific/singular wc mods without really putting too much emphasis on the builder/owner and the entire build (less analysis). That way individual unique achievements have a chance to be recognized for being special and might give others ideas/inspiration.


Sold.

Put a few people in the hat to do some judging who gets it for this month.
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #95353 of 107102
Quote:
Originally Posted by B NEGATIVE View Post

Sold.

Put a few people in the hat to do some judging who gets it for this month.

More than happy to participate and help out where possible thumb.gif
post #95354 of 107102
What was the original intent of MOTM...? Was it really to just judge on the extent of modifications or the overall build?

I can see where lines are blurred between builds which may have plenty of modifications yet may not look asthetically pleasing as a build with less mods yet having a more 'attractive' finish.
Edited by Costas - 2/29/16 at 2:32pm
Corsair 900D
(12 items)
 
Déjà vu
(16 items)
 
 
CPUMotherboardGraphicsGraphics
I7-6700K ASUS Maximus VIII Formula EVGA 980Ti Classified EVGA 980Ti Classified 
RAMHard DriveHard DriveCooling
Corsair CMD32GX4M4B3200C16 Samsung 512GB 950 Pro M2 Samsung 1TB 850 Pro Custom 
OSMonitorKeyboardPower
Win 10 ASUS PG278Q Corsair K70 RGB Corsair AX1500i 
CaseMouseAudioOther
Caselabs SMA8 Razer Deathadder 2013 On-Board Aquacomputer Aquaero 6XT 
  hide details  
Reply
Corsair 900D
(12 items)
 
Déjà vu
(16 items)
 
 
CPUMotherboardGraphicsGraphics
I7-6700K ASUS Maximus VIII Formula EVGA 980Ti Classified EVGA 980Ti Classified 
RAMHard DriveHard DriveCooling
Corsair CMD32GX4M4B3200C16 Samsung 512GB 950 Pro M2 Samsung 1TB 850 Pro Custom 
OSMonitorKeyboardPower
Win 10 ASUS PG278Q Corsair K70 RGB Corsair AX1500i 
CaseMouseAudioOther
Caselabs SMA8 Razer Deathadder 2013 On-Board Aquacomputer Aquaero 6XT 
  hide details  
Reply
post #95355 of 107102
Quote:
Originally Posted by ruffhi View Post


Just so that I don't get caught by any language confusion ... you mean a jigsaw like the picture below? If so ... then fantastic as I was given one for my birthday last year and so far I have only cut a stonking big hole in my back door for a doggie flap.


Excellent suggestions - thanks.

Yes, that type of powered saw.
post #95356 of 107102
Quote:
Originally Posted by Costas View Post

What was the original intent of MOTM...? Was it really to just judge on modifications all the overall build?

I can see where lines are blurred between builds which may have plenty of modifications yet may not look asthetically pleasing as a build with less mods yet having a more attractive finish.

What it was originally I do not know but my interpretation would include but not be limited to something worded like.....
When the case and or hardware in the build has been modified or replaced which improves functionality, aesthetics & or performance.
post #95357 of 107102
I did something I think is relatively neat this past weekend. Didn't get pictures of the whole process, but whatever.

A buddy of mind gave me an eMachines T1096, so I decided to have a little fun. I tore out the drive cage(s), drilled out the two proprietary standoffs, made some mounts for a 240mm rad in the front and 4 holes to mount my res to the ceiling, then tossed my recently modded (in possibly working condition) 670 and a spare motherboard I had laying around. Also replaced the stock 130w SFX unit with an ST45SF-G.

Only problems as it stands now are clean cabling (I don't think I'm gonna get that wish) and finding a CPU for the darn thing. I sold my Pentium a while back and now I'm regretting it big time.



This particular group of fittings destroyed my hands.

Edited by timerwin63 - 2/29/16 at 3:12pm
Dani
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 4690k Gigabyte GA-Z97N-Gaming 5 GTX 670 G.Skill Ares 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 Toshiba Laptop Drive WD Blue 2.5" XSPC Raystorm 
CoolingCoolingCoolingOS
EK FC670 Alphacool ST30 4x Darkside Gentle Typhoon Win7 Ultimate 
MonitorKeyboardPowerCase
Nixeus Vue 27 Smart 68 or WhiteFox Silverstone SX600-G EVGA Hadron Air 
Mouse
Mad Catz R.A.T.7 
  hide details  
Reply
Dani
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 4690k Gigabyte GA-Z97N-Gaming 5 GTX 670 G.Skill Ares 
Hard DriveHard DriveHard DriveCooling
Crucial MX100 Toshiba Laptop Drive WD Blue 2.5" XSPC Raystorm 
CoolingCoolingCoolingOS
EK FC670 Alphacool ST30 4x Darkside Gentle Typhoon Win7 Ultimate 
MonitorKeyboardPowerCase
Nixeus Vue 27 Smart 68 or WhiteFox Silverstone SX600-G EVGA Hadron Air 
Mouse
Mad Catz R.A.T.7 
  hide details  
Reply
post #95358 of 107102
Quote:
Originally Posted by timerwin63 View Post

Warning: Spoiler! (Click to show)
I did something I think is relatively neat this past weekend. Didn't get pictures of the whole process, but whatever.

A buddy of mind gave me an eMachines T1096, so I decided to have a little fun. I tore out the drive cage(s), drilled out the two proprietary standoffs, made some mounts for a 240mm rad in the front and 4 holes to mount my res to the ceiling, then tossed my recently modded (in possibly working condition) 670 and a spare motherboard I had laying around. Also replaced the stock 130w SFX unit with an ST45SF-G.

Only problems as it stands now are clean cabling (I don't think I'm gonna get that wish) and finding a CPU for the darn thing. I sold my Pentium a while back and now I'm regretting it big time.



This particular group of fittings destroyed my hands.

haha that is very impressive to fit all of that into what looks like a typical steel zero room box
post #95359 of 107102
Quote:
Originally Posted by timerwin63 View Post

I did something I think is relatively neat this past weekend. Didn't get pictures of the whole process, but whatever.

A buddy of mind gave me an eMachines T1096, so I decided to have a little fun. I tore out the drive cage(s), drilled out the two proprietary standoffs, made some mounts for a 240mm rad in the front and 4 holes to mount my res to the ceiling, then tossed my recently modded (in possibly working condition) 670 and a spare motherboard I had laying around. Also replaced the stock 130w SFX unit with an ST45SF-G.

Only problems as it stands now are clean cabling (I don't think I'm gonna get that wish) and finding a CPU for the darn thing. I sold my Pentium a while back and now I'm regretting it big time.



This particular group of fittings destroyed my hands.

thumbsupsmiley.png Is that EK ZMT, some other black tubing or other brand of neoprene tubing/hose? Either way, I like it. Neat short tubing runs terminated in white looks good.
post #95360 of 107102
I have a question for anyone out there who owns the Corsair 900D as you guys seen to really know stuff. Does a 64mm 360 rad fit up top in push, pull, push/pull or neither? I know the case is absolutely huge and it may be a stupid question but I just want to make sure that I can fit the rad I want up top.

Thanks in advance. smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery