Originally Posted by alltheGHz
Trying to get bubbles out of my res/pump. Should I be tilting the case while it is turned on?
After you tilt it - forward/backward if rad is mounted flat top or bottom & Sideways PLUS fwd/bkwd if rad is mounted vertically. ... It shouldn't take that many times really maybe ten max go really slow when you hear chugging go even slower.
Top off your res after each tilt if levels drop.
The ONLY thing I found worked after the main bubbles were out was to remove my resevoirs foam, so if you have foam or a anti-cyclone addition remove it a few days while alternating taking the cap or top g1/4 port screw off or at least only one turn tightened - to allow air to leave ..
Once bubbels are clear then replace it - I don't have a single bubble that has returned after 2 days now but replace with something EXTRA clean hands counting also yeah.
EDIT * Just Make SURE every time you are doing the tilting not resting-running that your port screw or lid is tightened downEdited by KG101 - 6/1/16 at 6:45pm